Order this document by MC68EC020AD/D MOTOROLA SEMICONDUCTOR PRODUCT INFORMATION MC68EC020 ADDENDUM 32-Bit Embedded Controller Technical Summary The enclosed case package replaces the package dimension Figure on page 33. This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice. (c) MOTOROLA INC., 1992 FG SUFFIX CASE 842D-02 Y AA 51 81 B A 0.20 (0.008) M B L 0.20 (0.008) 0.05 (0.002) M V 50 DETAIL "A" 100 31 P 1 Z C A-B S D S D H A-B S D S 80 30 D F A A, B, D 0.20 (0.008) M C A - B S 0.50 (0.002) A - B DETAIL "A" DS S 0.20 (0.008) H A-B S M N DETAIL "B" J BASE METAL DS D 0.20 (0.008) DATUM PLANE U T H M C E R Q K X DETAIL "C" DIM A B C D E F G H J K L M N P Q R S T U V X Y Z AA 2 M MILLIMETERS MIN MAX 19.90 20.10 13.90 14.10 -- 3.30 0.22 0.38 2.55 3.05 0.22 0.33 0.65 BSC 0.10 0.36 0.17 0.23 0.65 0.95 12.35 REF 5 16 0.13 0.17 0.325 BSC 0 7 0.25 0.35 23.65 24.15 -- 0.13 -- 0 17.65 18.15 1.95 REF 0.58 REF 0.83 REF 18.85 REF C A-B S DS DETAIL "C" DATUM H PLANE C SEATING PLANE INCHES MIN MAX 0.783 0.791 0.547 0.555 -- 0.130 0.009 0.015 0.100 0.120 0.009 0.013 0.026 BSC 0.004 0.014 0.007 0.009 0.026 0.037 0.486 REF 5 16 0.005 0.007 0.013 BSC 0 7 0.010 0.014 0.931 0.951 -- 0.005 -- 0 0.695 0.715 0.077 REF 0.023 REF 0.033 REF 0.742 REF G H DETAIL "B" 0.10 (0.004) M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DATUM PLANE -H- IS LOCATED AT BOTTOM OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE BOTTOM OF THE PARTING LINE. 4. DATUMS -A-, -B-, AND -D- TO BE DETERMINED AT DATUM PLANE -H-. 5. DIMENSIONS S AND V TO BE DETERMINED AT SEATING PLANE -C-. 6. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.25 (0.010) PER SIDE. DIMENSIONS A AND B DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE -H-. 7. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MC68EC020 ADDENDUM MOTOROLA THIS PAGE INTENTIONALLY LEFT BLANK MOTOROLA MC68EC020 ADDENDUM 3 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typical" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nipon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141 Japan. ASIA-Pacific: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrail Estate, Tai Po, N.T., Hong Kong.