Document Number: 60024 For technical questions, contact: thinfilm@vishay.com www.vishay.com
Revision: 25-Jan-10 81
Precision Automotive Thin Film Chip Resistors,
AEC-Q200 Qualified, 2 kV ESD Rating
PAT
Vishay Thin Film
These chip resistors are available in wraparound
terminations styles in 12 case sizes. They incorporate self
passivated enhanced tantalum nitride resistor film to give
superior performance on moisture resistance, electrostatic
discharge, voltage coefficient, power handling and
resistance stability. The terminations consist of an adhesion
layer, a leach resistant nickel barrier, and solder coating
(lead (Pb)-free). This product will out-perform all
requirements of AEC-Q200.
CONSTRUCTION
FEATURES
• Resistance range: 10 Ω to 3 MΩ
• AEC-Q200 qualified
• AEC-Q200 ESD rated class 1C (2 kV)
• Laser trimmed to any value
• Moisture resistant to MIL-STD-202, method 202
• Tantalum nitride resistor film on high purity alumina
substrate
• 100 % visual inspected per MIL-PRF-55342
• Laser-trimmed tolerances to ± 0.1 %
• Load life stability < 0.05 % at 1000 h at 70 °C
• Very low noise and voltage coefficient
(< - 30 dB, < 0.1 ppm/V)
• Compliant to RoHS directive 2002/95/EC
TYPICAL PERFORMANCE
Adhesion Layer
High Purity
Alumina Substrate
Nickel Barrie
r
Solder
Coating
Passivation
T
anta
l
um
Ni
tr
id
e
Resistive Film
ABSOLUTE
TCR 25
TOL. 0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Tantalum nitride -
Resistance Range 10 Ω to 3 MΩ-
TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C - 55 °C to + 125 °C
Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 °C
Stability: Absolute ± 0.05 % 2000 h at 70 °C rated power
Stability: Ratio Not applicable -
Voltage Coefficient Less than 0.1 ppm/V -
Working Voltage 75 V to 200 V -
Operating Temperature Range - 55 °C to + 150 °C -
Storage Temperature Range - 55 °C to + 150 °C -
Noise < - 30 dB -
Shelf Life Stability: Absolute 100 ppm 1 year at 25 °C
COMPONENT RATINGS
CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE (Ω)
0402 50 75 20 to 35K
0603 150 75 10 to 80K
0805 200 100 10 to 301K
1206 400 200 10 to 1M
1505 400 150 10 to 1M
2208 750 150 10 to 1.75M
2010 800 200 10 to 2M
2512 1000 200 10 to 3M
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
www.vishay.com For technical questions, contact: thinfilm@vishay.com Document Number: 60024
82 Revision: 25-Jan-10
PAT
Vishay Thin Film Precision Automotive Thin Film Chip Resistors,
AEC-Q200 Qualified, 2 kV ESD Rating
Note
(1) Preferred packaging code
DIMENSIONS in inches
CASE SIZE L W T D E
0402 0.042 ± 0.008 0.022 ± 0.005 0.015 ± 0.003 0.010 ± 0.005 0.010 ± 0.005
0603 0.064 ± 0.006 0.032 ± 0.005 0.015 ± 0.003 0.012 ± 0.005 0.015 ± 0.005
0805 0.080 ± 0.006 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005
1206 0.126 ± 0.008 0.063 ± 0.005 0.015 ± 0.003 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010
1505 0.155 ± 0.007 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005
2010 0.209 ± 0.009 0.098 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005
2208 0.230 ± 0.007 0.075 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005
2512 0.259 ± 0.009 0.124 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005
ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)
ENVIRONMENTAL TEST CONDITIONS LIMITS
PER AEC-Q200
TYPICAL VISHAY
PERFORMANCE
Resistance Temperature Characteristic - 55 °C to + 125 °C ± 50 ppm/°C ± 35 ppm/°C
Max. Ambient Temp. at Rated Wattage + 70 °C + 70 °C
Max. Ambient Temp. at Power Derating + 150 °C + 150 °C
High Temperature Storage ΔRMIL-STD-202, 108, 1000 h at 125 °C ± 0.1 % + 0.016 %
Temperature Cycling ΔRJESD22, JA-104, 1000 cycles, - 55 °C to + 125 °C ± 0.15 % + 0.013 %
Moisture Resistance ΔRMIL-STD-202, 106 ± 0.20 % + 0.0010 %
Biased Humidity ΔRMIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.10 % + 0.0297 %
Life ΔRMIL-STD-202, 108 at 125 °C, 1000 h ± 0.1 % + 0.0220 %
Mechanical Shock ΔRMIL-STD-202, method 213, condition C ± 0.1 % + 0.0130 %
Vibration ΔRMIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.1 % + 0.0030 %
Resistance to Soldering Heat ΔRMIL-STD-202, 204, condition B ± 0.10 % + 0.0150 %
Electrostatic Discharge ΔRAEC-Q200-002 at 2 kV, human body ± 0.10 % - 0.032 %
Solderability Visual J-STD-002, method B and B1 95 % Acceptable
Terminal Strength ΔRAEC-Q200-006 at 1 kg for 60 s ± 0.10 % + 0.012 %
Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PAT1206E1002BST1
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING
PAT 0402
0603
0805
1206
1505
2010
2208
2512
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C
The first 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
“R” designates the
decimal point.
Example:
10R0 = 10 Ω
1000 = 100 Ω
1002 = 10 kΩ
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
S = Wraparound
lead (Pb)-free
solder
w/nickel barrier
TAPE AND REEL
T1 = 1000 min., 1000 mult (1)
TF = Full reel
TS = 100 min., 1 mult
D
L
E
T
W
L
DT
06E1 02B01 ST1TPA 2
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
