PNP Power Silicon Transistor 2N5151, 2N5151L & 2N5153, 2N5153L Features * Available in JAN, JANTX, and JANTXV per MIL-PRF-19500/545 * TO-5 Package: 2N5151L, 2N5153L TO-39 (TO-205AD) Package: 2N5151, 2N5153 Maximum Ratings (TC = +25C unless otherwise noted) Symbol Value Units Collector - Emitter Voltage Ratings VCEO 80 Vdc Collector - Base Voltage VCBO 100 Vdc Emitter - Base Voltage VEBO 5.5 Vdc IC 2.0 Adc PT 1.0 10 W Top, Tstg RJC -65 to +200 C 10 C/W Collector Current Total Power Dissipation @ TA = +25 C @ TC = +25 C Operating & Storage Temperature Range Thermal Resistance, Junction-to-Case Electrical Characteristics (TA = +25C unless otherwise noted) OFF Characteristics Symbol Mimimum Maximum Units V(BR)CEO 80 --- Vdc Emitter - Base Cutoff Current VEB = 4.0 Vdc, IC = 0 VEB = 5.5 Vdc, IC = 0 IEBO --- 1.0 1.0 Adc mAdc Collector - Emitter Cutoff Current VCE = 60 Vdc, VBE = 0 VCE = 100 Vdc, VBE = 0 ICES --- 1.0 1.0 Adc mAdc ICEO --- 50 Adc Collector - Emitter Breakdown Voltage IC = 100 mAdc, IB = 0 Collector - Emitter Cutoff Current VCE = 40 Vdc, IB = 0 Revision Date: 10/12/2011 New Product 1 2N5151, 2N5153 2N5151L, 2N5153L Electrical Characteristics -con't ON Characteristics Symbol Mimimum HFE Maximum Units Forward Current Transfer Ratio IC = 50 mAdc, VCE = 5.0 Vdc 2N5151 20 --- IC = 2.5 Adc, VCE = 5.0 Vdc 2N5153 2N5151 50 30 --90 IC = 5.0 Adc, VCE = 5.0 Vdc 2N5153 2N5151 70 20 200 --- 2N5153 40 --- VCE(sat) ----- 0.75 1.5 Vdc VBE(ON) --- 1.45 Vdc VBE(sat) --- 1.45 2.2 Vdc | hfe | 6.0 7.0 ----- hfe 20 50 ----- Cobo --- 250 pF Tum-On Time IC = 5.0 Adc; IB1 = 500 mAdc RL = 6 VBE(OFF) = 3.7 Vdc ton --- 0.5 s Tum-offTime IC = 5.0 Adc; IB1 = 500 mAdc IB2 = 500 mAdc RL = 6 VBE(OFF) = 3.7 Vdc toff --- 1.5 s Collector - Emitter Saturation Voltage IC = 2.5 Adc, IB = 250 mAdc IC = 5.0 Adc, IB = 500 mAdc Emitter - Base Voltage Non-Saturation IC = 2.5 Adc, VCE = 5.0 Vdc Emitter - Base Saturation Voltage IC = 2.5 Adc, IB = 250 mAdc IC = 5.0 Adc, IB = 500 mAdc DYNAMIC Characteristics Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 500 mAdc, VCE= 5.0 Vdc, f = 10 MHz 2N5151 2N5153 Small-signal short Circuit FOlWard-Current Transfer Ratio IC = 100 mAdc, VCE = 5 Vdc, f= 1KHz 2N5151 2N5l53 Output Capacitance VCB = 100 mVdc, IE = 0, f = 1.0 MHz SWITCHING Characteristics Storage Time IC = 5.0 Adc; IB1 = 500 mAdc IB2 = -500 mAdc RL = 6 ts --- 1.4 s Fall Time VBE(OFF) = 3.7 Vdc tf --- 0.5 s SAFE OPERATING AREA DC Tests: Test 1: Test 2: Test 3: 2 TC = +25 C, 1 Cycle, tp = 1.0 s VCE = 5.0 Vdc, IC = 2.0 Adc VCE = 32.0 Vdc, IC = 310 mAdc VCE = 80 Vdc, IC = 12.5 mAdc 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Revision Date: 10/12/2011 Outline Drawing TO-5 Package: (2N5151L, 2N5153L) TO-39 (TO-205AD) Package: (2N5151, 2N5153) NOTE: Dimensions in Inches [mm] Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2010 Aeroflex / Metelics. All rights reserved. Revision Date: 10/12/2011 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.