DM54LS04J/883 - NATIONAL SEMICONDUCTOR

54LS04,DM54LS04

54LS04/DM54LS04 Hex Inverting Gates

Literature Number: SNOS275

TL/F/6345

54LS04/DM54LS04/DM74LS04 Hex Inverting Gates

June 1989

54LS04/DM54LS04/DM74LS04 Hex Inverting Gates

General Description

This device contains six independent gates each of which

performs the logic INVERT function.

Features

YAlternate Military/Aerospace device (54LS04) is avail-

able. Contact a National Semiconductor Sales Office/

Distributor for specifications.

Connection Diagram

Dual-In-Line Package

TL/F/6345–1

Order Number 54LS04DMQB, 54LS04FMQB, 54LS04LMQB, DM54LS04J, DM54LS04W, DM74LS04M or DM74LS04N

See NS Package Number E20A, J14A, M14A, N14A or W14B

Function Table

YeA

Input Output

High Logic Level

LeLow Logic Level

C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.

Absolute Maximum Ratings (Note)

If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales

Office/Distributors for availability and specifications.

Supply Voltage 7V

Input Voltage 7V

Operating Free Air Temperature Range

DM54LS and 54LS b55§Ctoa

125§C

DM74LS 0§Ctoa

70§C

Storage Temperature Range b65§Ctoa

150§C

Note:

The ‘‘Absolute Maximum Ratings’’ are those values

beyond which the safety of the device cannot be guaran-

teed. The device should not be operated at these limits. The

parametric values defined in the ‘‘Electrical Characteristics’’

table are not guaranteed at the absolute maximum ratings.

The ‘‘Recommended Operating Conditions’’ table will define

the conditions for actual device operation.

Recommended Operating Conditions

Symbol Parameter DM54LS04 DM74LS04 Units

Min Nom Max Min Nom Max

VCC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V

VIH High Level Input Voltage 2 2 V

VIL Low Level Input Voltage 0.7 0.8 V

IOH High Level Output Current b0.4 b0.4 mA

IOL Low Level Output Current 4 8 mA

TAFree Air Operating Temperature b55 125 0 70 §C

Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)

Symbol Parameter Conditions Min Typ Max Units

(Note 1)

VIInput Clamp Voltage VCC eMin, IIeb

18 mA b1.5 V

VOH High Level Output VCC eMin, IOH eMax, DM54 2.5 3.4 V

Voltage VIL eMax DM74 2.7 3.4

VOL Low Level Output VCC eMin, IOL eMax, DM54 0.25 0.4

Voltage VIH eMin DM74 0.35 0.5 V

IOL e4 mA, VCC eMin DM74 0.25 0.4

IIInput Current @Max VCC eMax, VIe7V 0.1 mA

Input Voltage

IIH High Level Input Current VCC eMax, VIe2.7V 20 mA

IIL Low Level Input Current VCC eMax, VIe0.4V b0.36 mA

IOS Short Circuit VCC eMax DM54 b20 b100 mA

Output Current (Note 2) DM74 b20 b100

ICCH Supply Current with VCC eMax 1.2 2.4 mA

Outputs High

ICCL Supply Current with VCC eMax 3.6 6.6 mA

Outputs Low

Switching Characteristics at VCC e5V and TAe25§C (See Section 1 for Test Waveforms and Output Load)

RLe2kX

Symbol Parameter CLe15 pF CLe50 pF Units

Min Max Min Max

tPLH Propagation Delay Time 310415ns

Low to High Level Output

tPHL Propagation Delay Time 310415ns

High to Low Level Output

Note 1: All typicals are at VCC e5V, TAe25§C.

Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second.

Physical Dimensions inches (millimeters)

Ceramic Leadless Chip Carrier Package (E)

Order Number 54LS04LMQB

NS Package Number E20A

14-Lead Ceramic Dual-In-Line Package (J)

Order Number 54LS04DMQB or DM54LS04J

NS Package Number J14A

Physical Dimensions inches (millimeters) (Continued)

14-Lead Small Outline Molded Package (M)

Order Number DM74LS04M

NS Package Number M14A

14-Lead Molded Dual-In-Line Package (N)

Order Number DM74LS04N

NS Package Number N14A

54LS04/DM54LS04/DM74LS04 Hex Inverting Gates

Physical Dimensions inches (millimeters) (Continued)

14-Lead Ceramic Flat Package (W)

Order Number 54LS04FMQB or DM54LS04W

NS Package Number W14B

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life

systems which, (a) are intended for surgical implant support device or system whose failure to perform can

into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life

failure to perform, when properly used in accordance support device or system, or to affect its safety or

with instructions for use provided in the labeling, can effectiveness.

be reasonably expected to result in a significant injury

to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309

Arlington, TX 76017 Email: cnjwge

tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408

Tel: 1(800) 272-9959 Deutsch Tel: (

49) 0-180-530 85 85 Tsimshatsui, Kowloon

Fax: 1(800) 737-7018 English Tel: (

49) 0-180-532 78 32 Hong Kong

Fran3ais Tel: (

49) 0-180-532 93 58 Tel: (852) 2737-1600

Italiano Tel: (

49) 0-180-534 16 80 Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,

and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should

obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are

sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard

warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where

mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and

applications using TI components. To minimize the risks associated with customer products and applications, customers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,

or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information

published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a

warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual

property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied

by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive

business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional

restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all

express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not

responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably

be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing

such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products

and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be

provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in

such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are

specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military

specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at

the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are

designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated

products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products Applications

Audio www.ti.com/audio Communications and Telecom www.ti.com/communications

Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers

Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps

DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy

DSP dsp.ti.com Industrial www.ti.com/industrial

Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical

Interface interface.ti.com Security www.ti.com/security

Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Mobile Processors www.ti.com/omap

Wireless Connectivity www.ti.com/wirelessconnectivity

TI E2E Community Home Page e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265