CP1E-E10DT1-D - OMRON

CP-series CP1E CPU Units

CP1E-E@@SD@-@ CP1E-N@@S@D-@-@

CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@

The CP1E Programmable Controller: Economical, Easy to use, and Efficient

■The E@@(S)-type Basic CPU Units provide cost

performance and easy application with only basic

functionality.

■The N@@(S@) and NA-types Application CPU Units

support Programmable Terminal connection, position

control, and inverter connection

Features

• New CP1E CPU Units now available.

- Lineup including CPU Units with built-in three ports: USB, RS-232C, RS-485.

- The depth of CPU Units with RS-232C connectors is reduced by 20 mm. (N30/40/60S(1))

• Easy connection with computers using commercially available USB cables.

• With E30/40/60(S), N30/40/60(S@) or NA20 CPU Units, Add I/O, Analog I/O or Temperature Inputs by Connecting

Expansion Units or Expansion I/O Units.

• Input interrupts

• Complete High-speed Counter Functionality.

• Versatile pulse control for Transistor Output for N14/20/30/40/60(S@) or NA20 CPU Units.

• PWM Outputs for Transistor Output for N14/20/30/40/60(S@) or NA20 CPU Units.

• Mounting Serial Option Boards, Ethernet Option Board and Analog Option Board to N30/40/60 or NA20 CPU Units.

• Built-in analog I/O, two inputs and one output, for NA-type CPU Units.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

The product photographs and figures that are used in this catalog may vary somewhat from the actual products.

CP1E-E20SDR-A CP1E-N40S1DR-A

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

System Configuration

■Basic Model

Basic System Configuration Using an E@@S-type CPU Unit

Basic System Configuration Using an E@@-type CPU Unit

Expansion I/O Units Expansion Units

20 or 40 I/O Points

8 inputs

8 outputs

16 outputs

32 outputs

Up to 3 Units can be connected

CP1W-CN811

CP1E CPU Unit

Expansion Units and

Expansion I/O Units

I/O Connecting Cable

When a two level layout is created by expansion and distance is required

DIN Track

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

Personal computer

Support Software

CX-Programmer

IBM PC/AT or equivalent

CP1E-E14SDR-

CP1E-E20SDR-

CP1E-E30SDR-

CP1E-E40SDR-

CP1E-E60SDR-

Personal computer

CP1E-E30DR-A

CP1E-E40DR-A

CP1E-E10D@-@

CP1E-E14DR-A

CP1E-E20DR-A

Support Software

CX-Programmer IBM PC/AT or equivalent

CP1E CPU Unit Expansion I/O Units Expansion Units

20 or 40 I/O Points

8 inputs

8 outputs

16 outputs

32 outputs

Up to 3 Units can be connected

CP1W-CN811

CP1E CPU Unit

Expansion Units and

Expansion I/O Units

I/O Connecting Cable

When a two level layout is created by expansion and distance is required

DIN Track

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■Application Model

Basic System Configuration Using an N/NA@@S(1)-type CPU Unit

Basic System Configuration Using an N/NA-type CPU Unit

Expansion I/O Units Expansion Units

8 inputs

8 outputs

16 outputs

32 outputs

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

Up to 3 Units can be connected

DIN Track

CP1W-CN811

CP1E CPU Unit

Expansion Units and

Expansion I/O Units I/O Connecting Cable

When a two level layout is created by expansion and distance is required

20 or 40 I/O Points

(NT Link/Host Link)

General component

(No-protocol mode)

(Modbus-RTU)

CP-series PLC or

CJ1M PLC

(Serial PLC Link)

Host computer

(Host Link)

Programmable

Terminal (PT)

Inverter

Personal computer

Support Software

CX-Programmer

IBM PC/AT or equivalent

Battery

CP1W-BAT01

CP1E-N30S(1)D-

CP1E-N40S(1)D-

CP1E-N60S(1)D-

CP1E-N30D-

CP1E-N40D-

CP1E-N60D-

CP1E-NA20D-

CP1E-N14D-

CP1E-N20D-

CP1E CPU Unit Expansion I/O Units Expansion Units

20 or 40 I/O Points

8 inputs

8 outputs

16 outputs

32 outputs

Analog I/O

Analog inputs

Analog outputs

Temperature sensors

CompoBus/S I/O Link Unit

Up to 3 Units can be connected

DIN Track

CP1W-CN811

CP1E CPU Unit

Expansion Units and

Expansion I/O Units I/O Connecting Cable

Personal computer

IBM PC/AT or

equivalent

Built in RS-232C

Battery

CP1W-BAT01

When a two level layout is created by expansion and distance is required

(NT Link/HOST Link)

General component

(No-protocol mode)

(Modbus-RTU)

CP-series PLC or

CJ1M PLC

(Serial PLC Link)

Host computer

(Host Link)

Programmable

Terminal (PT)

Inverter

Support Software

CX-Programmer

COMM

RS-232C

Option Board

CP1W-CIF01

COMM

RS-422A/485

Option Board

CP1W-CIF11

CP1W-CIF12

IP ADDRESS:

SUBNET MASK:

COMMERR

10BASE-T

100BASE-TX

Ethernet

Option Board

CP1W-CIF41

(version 2.0 or higher)

rOrO

Analog

Option Board

CP1W-ADB21

CP1W-DAB21V

CP1W-MAB221

Note Neither the CP1W-DAM01 LCD Option Board nor the CP1W-CIF41

Ethernet Option Board version 1.0 can be used.

* Analog Option Board can be mounted only to N30/40/60 or NA20 CPU

Units version 1.2 or higher.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Model Number Structure

■Model Number Legend (Not all models that can be represented with the model number legend can necessarily be produced.)

Difference between E/N/NA@@-type and E/N@@S(1)-type

■Basic Model

E@@(S)-type CPU Units

Difference in Characteristics and Functions

Product Lineup

1. Class

E : Basic model

N : Application model

NA :Application model with built-in analog

3. Unit type

S : Renewal

None : Normal

6. Output type

R : Relays outputs

T : Transistor outputs, sinking

T1 : Transistor outputs, sourcing

2. I/O capacity

10 : 10 I/O points (6 inputs, 4 outputs)

14 : 14 I/O points (8 inputs, 6 outputs)

20 : 20 I/O points (12 inputs, 8 outputs)

30 : 30 I/O points (18 inputs, 12 outputs)

40 : 40 I/O points (24 inputs, 16 outputs)

60 : 60 I/O points (36 inputs, 24 outputs)

4. Built-in RS-485 port

1 : RS-485

None : -

7. Power supply

A : AC power supply

D : DC power supply

5. Input type

D : DC inputs

Normal-type

E@@-type

Renewal-type

E@@S-type

Function E@@-type (Normal) E@@S-type (Renewal)

Analog adjusters 2 adjusters

(Setting range: 0 to 255)

None

The analog adjuster PV in A642/A643 is fixed on 0000.

E@@ CPU Unit (Normal) E@@S CPU Unit (Renewal)

Relay outputs Transistor outputs

(sinking/sourcing) Relay outputs Transistor outputs

(sinking/sourcing)

Power

supply AC DC AC DC AC DC AC DC

10 I/O points ❍❍❍❍ -- -- -- --

14 I/O points ❍-- -- -- ❍-- -- --

20 I/O points ❍-- -- -- ❍-- -- --

30 I/O points ❍-- -- -- ❍-- -- --

40 I/O points ❍-- -- -- ❍-- -- --

60 I/O points -- -- -- -- ❍-- -- --

CP1E-@@@@@D@-@

(1) (2) (3) (4) (5) (6) (7)

Peripheral USB Port

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■Application Model

N/NA@@(S)-type CPU Units

Difference in Characteristics and Functions

Product Lineup

*30, 40 and 60 I/O points only.

Normal-type

N@@-/NA-type

Renewal-type

N@@S1-type

Renewal-type

N@@S-type

Function N/NA@@-type (Normal) N@@S(1)-type (Renewal)

Analog adjusters 2 adjusters

(Setting range: 0 to 255)

None

The analog adjuster PV in A642/A643 is fixed on 0000.

Built-in RS-232C port 6 signals are supported: SD, RD, RS, CS, DR and ER. 4 signals are supported: SD, RD, RS and CS.

DR (pin 7) and ER (pin 8) are not supported.

Option board 1 port (N30/40/60, NA20 CPU Unit only) Cannot be mounted

There is no slot for an option board.

Built-in RS-485 port None

1 port (N30/40/60S1 CPU Unit only)

With 2-wire connections, it can only communicate in half duplex.

Terminating resistance ON/OFF can be set by DIP switch.

Terminal

Arrangements

(Transistor

outputs

only)

COM

allocation

CIO 100.00 and CIO 100.01 correspond with different common

terminals.

CIO 100.00 and CIO 100.01 correspond with the same common

terminal.

Power

supply for

transistor

outputs

Not needed

Do not connect an external power supply.

Needed

It is necessary to connect a DC24V external power supply when

using terminals 00 and 01 on terminal block CIO 100. Do not

connect the external power supply to the terminals except 00 and 01

on terminal block CIO 100.

Normal-type Renewal-type

N@@ CPU Unit

RS-232C+1 option slot (*)

N@@S CPU Unit

Built-in RS-232C

N@@S1 CPU Unit

Built-in RS-232C+RS-485

Relay outputs Transistor outputs

(sinking/sourcing) Relay outputs Transistor outputs

(sinking/sourcing)

Power

supply AC DC AC DC AC DC AC DC AC DC AC DC

10 I/O points -- -- -- -- -- -- -- -- -- -- -- --

14 I/O points ❍❍❍❍ -- -- -- -- -- -- -- --

20 I/O points ❍❍❍❍ -- -- -- -- -- -- -- --

30 I/O points ❍❍❍❍❍ -- -- ❍❍ -- -- ❍

40 I/O points ❍❍❍❍❍ -- -- ❍❍ -- -- ❍

60 I/O points ❍❍❍❍❍ -- -- ❍❍ -- -- ❍

20 I/O points

(Built-in analog) ❍-- -- ❍-- -- -- -- -- -- -- --

Peripheral USB

Port

Built-in RS-232C

port

Option Board slot

Analog input terminal

(NA-type only)

Analog output terminals

(NA-type only)

Built-in RS-232C

port

Built-in RS-485

port

Peripheral USB Port

Built-in RS-232C

port

NC000102

NC COM COM COM 03

CIO 100.00 and CIO 100.01

are different COM.

V+000102

V- COM(V-) COM 03

CIO 100.00 and CIO 100.01

are the same COM.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Ordering Information

International Standards

•The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus,

UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, KC: KC Registration, and CE: EU Directives.

•Contact your OMRON representative for further details and applicable conditions for these standards.

●Renewal-type

■E@@S-type CP1E CPU Units (Built-in USB port)

Basic Model

Product

name

Specifications External

power

supply

(24 VDC)

(A)

Current

consumption (A)

Model Standards

Power

Supply Inputs Outputs Output

type

Program

capacity

Data

memory

capacity

5 V 24 V

E@@S-

type CPU

Units with

14 I/O

Points 100 to 240

VAC 8 6 Relay 2K steps 2K words -- 0.16 0.07 CP1E-E14SDR-A CE, KC

E@@S-

type CPU

Units with

20 I/O

Points 100 to 240

VAC 12 8 Relay 2K steps 2K words -- 0.17 0.08 CP1E-E20SDR-A CE, KC

E@@S-

type CPU

Units with

30 I/O

Points 100 to 240

VAC 18 12 Relay 2K steps 2K words 0.30 0.17 0.07 CP1E-E30SDR-A CE, KC

E@@S-

type CPU

Units with

40 I/O

Points 100 to 240

VAC 24 16 Relay 2K steps 2K words 0.30 0.17 0.09 CP1E-E40SDR-A CE, KC

E@@S-

type CPU

Units with

60 I/O

Points 100 to 240

VAC 36 24 Relay 2K steps 2K words 0.30 0.17 0.13 CP1E-E60SDR-A CE, KC

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Normal-type

■E@@-type CP1E CPU Units (Built-in USB port)

Product

name

Specifications External

power

supply

(24 VDC)

(A)

Current

consumption (A)

Model Standards

Power

Supply Inputs Outputs Output

type

Program

capacity

Data

memory

capacity

5 V 24 V

E@@-type

CPU Units

with 10 I/O

Points 100 to 240

VAC

Relay

steps

words

-- 0.08 0.04 CP1E-E10DR-A

UC1, N,

L, CE, KC

Transistor

(sinking) -- 0.11 -- CP1E-E10DT-A

Transistor

(sourcing)

-- 0.11 -- CP1E-E10DT1-A

24 VDC

Relay -- 0.08 0.04 CP1E-E10DR-D

Transistor

(sinking) -- 0.11 -- CP1E-E10DT-D

Transistor

(sourcing)

-- 0.11 -- CP1E-E10DT1-D

E@@-type

CPU Units

with 14 I/O

Points 100 to 240

VAC 8 6 Relay 2K steps 2K words -- 0.16 0.07 CP1E-E14DR-A UC1, N,

L, CE, KC

E@@-type

CPU Units

with 20 I/O

Points 100 to 240

VAC 12 8 Relay 2K steps 2K words -- 0.17 0.08 CP1E-E20DR-A UC1, N,

L, CE, KC

E@@-type

CPU Units

with 30 I/O

Points 100 to 240

VAC 18 12 Relay 2K steps 2K words 0.30 0.17 0.07 CP1E-E30DR-A UC1, N,

L, CE, KC

E@@-type

CPU Units

with 40 I/O

Points 100 to 240

VAC 24 16 Relay 2K steps 2K words 0.30 0.17 0.09 CP1E-E40DR-A UC1, N,

L, CE, KC

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Renewal-type

■N@@S1-type CP1E CPU Units (Built-in RS-232C, RS-485, USB ports)

■N@@S-type CP1E CPU Units (Built-in RS-232C, USB ports)

Application Model

Product

name

Specifications External

power

supply

(24 VDC)

(A)

Current

consumption (A)

Model Standards

Power

Supply Inputs Outputs Output

type

Program

capacity

Data

memory

capacity

5 V 24 V

N@@S1-

type CPU

Units with

30 I/O

Points

100 to 240

VAC

18 12

Relay

8K steps 8K words

0.30 0.21 0.07 CP1E-N30S1DR-A

CE, KC

DC24V

Transistor

(sinking)

-- 0.27 0.02 CP1E-N30S1DT-D

Transistor

(sourcing)

-- 0.27 0.02 CP1E-N30S1DT1-D

N@@S1-

type CPU

Units with

40 I/O

Points

100 to 240

VAC

24 16

Relay

8K steps 8K words

0.30 0.21 0.09 CP1E-N40S1DR-A

CE, KC

DC24V

Transistor

(sinking)

-- 0.31 0.02 CP1E-N40S1DT-D

Transistor

(sourcing)

-- 0.31 0.02 CP1E-N40S1DT1-D

N@@S1-

type CPU

Units with

60 I/O

Points

100 to 240

VAC

36 24

Relay

8K steps 8K words

0.30 0.21 0.13 CP1E-N60S1DR-A

CE, KC

DC24V

Transistor

(sinking)

-- 0.31 0.02 CP1E-N60S1DT-D

Transistor

(sourcing)

-- 0.31 0.02 CP1E-N60S1DT1-D

Product

name

Specifications External

power

supply

(24 VDC)

(A)

Current

consumption (A)

Model Standards

Power

Supply Inputs Outputs Output

type

Program

capacity

Data

memory

capacity

5 V 24 V

N@@S-

type CPU

Units with

30 I/O

Points

100 to 240

VAC

18 12

Relay

8K steps 8K words

0.30 0.21 0.07 CP1E-N30SDR-A

DC24V

Transistor

(sinking)

-- 0.27 0.02 CP1E-N30SDT-D

Transistor

(sourcing)

-- 0.27 0.02 CP1E-N30SDT1-D

N@@S-

type CPU

Units with

40 I/O

Points

100 to 240

VAC

24 16

Relay

8K steps 8K words

0.30 0.21 0.09 CP1E-N40SDR-A

DC24V

Transistor

(sinking)

-- 0.31 0.02 CP1E-N40SDT-D

Transistor

(sourcing)

-- 0.31 0.02 CP1E-N40SDT1-D

N@@S-

type CPU

Units with

60 I/O

Points

100 to 240

VAC

36 24

Relay

8K steps 8K words

0.30 0.21 0.13 CP1E-N60SDR-A

DC24V

Transistor

(sinking)

-- 0.31 0.02 CP1E-N60SDT-D

Transistor

(sourcing)

-- 0.31 0.02 CP1E-N60SDT1-D

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Normal-type

■N/NA@@-type CP1E CPU Units (Built-in RS-232C, USB ports)

Product

name

Specifications External

power

supply

(24 VDC)

(A)

Current

consumption (A)

Model

Standards

Power

Supply Inputs Outputs Output

type

Program

capacity

Data

memory

capacity

5 V 24 V

N@@-type

CPU Units

with 14 I/O

Points 100 to 240

VAC

Relay

steps

words

-- 0.17 0.07 CP1E-N14DR-A

UC1, N,

L, CE, KC

Transistor

(sinking) -- 0.22 0.02 CP1E-N14DT-A

Transistor

(sourcing)

-- 0.22 0.02 CP1E-N14DT1-A

24 VDC

Relay -- 0.17 0.07 CP1E-N14DR-D

Transistor

(sinking) -- 0.22 0.02 CP1E-N14DT-D

Transistor

(sourcing)

-- 0.22 0.02 CP1E-N14DT1-D

N@@-type

CPU Units

with 20 I/O

Points 100 to 240

VAC

12 8

Relay

8K steps 8K words

-- 0.18 0.08 CP1E-N20DR-A

UC1, N,

L, CE, KC

Transistor

(sinking) -- 0.23 0.02 CP1E-N20DT-A

Transistor

(sourcing)

-- 0.23 0.02 CP1E-N20DT1-A

24 VDC

Relay -- 0.18 0.08 CP1E-N20DR-D

Transistor

(sinking) -- 0.23 0.02 CP1E-N20DT-D

Transistor

(sourcing)

-- 0.23 0.02 CP1E-N20DT1-D

N@@-type

CPU Units

with 30 I/O

Points 100 to 240

VAC

18 12

Relay

8K steps 8K words

0.30 0.21 0.07 CP1E-N30DR-A

UC1, N,

L, CE, KC

Transistor

(sinking) 0.30 0.27 0.02 CP1E-N30DT-A

Transistor

(sourcing)

0.30 0.27 0.02 CP1E-N30DT1-A

24 VDC

Relay -- 0.21 0.07 CP1E-N30DR-D

Transistor

(sinking) -- 0.27 0.02 CP1E-N30DT-D

Transistor

(sourcing)

-- 0.27 0.02 CP1E-N30DT1-D

N@@-type

CPU Units

with 40 I/O

Points 100 to 240

VAC

24 16

Relay

8K steps 8K words

0.30 0.21 0.09 CP1E-N40DR-A

UC1, N,

L, CE, KC

Transistor

(sinking) 0.30 0.31 0.02 CP1E-N40DT-A

Transistor

(sourcing)

0.30 0.31 0.02 CP1E-N40DT1-A

24 VDC

Relay -- 0.21 0.09 CP1E-N40DR-D

Transistor

(sinking) -- 0.31 0.02 CP1E-N40DT-D

Transistor

(sourcing)

-- 0.31 0.02 CP1E-N40DT1-D

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■Battery Set

■Option Board (for CP1E N30/40/60 or NA20 CPU Units)

The Options cannot be used for CP1E N14/20, N30/40/60S(1), E10/14/20/30/40/60(S) CPU Units.

Note: It is not possible to use a CP-series Ethernet Option Board version 1.0 (CP1W-CIF41), LCD Option Board (CP1W-DAM01), or Memory Card

(CP1W-ME05M) with a CP1E CPU Unit.

*Support is provided with CP1E CPU Unit version 1.2 and later.

N@@-type

CPU Units

with 60 I/O

Points

100 to 240

VAC

36 24

Relay

steps

words

0.30 0.21 0.13 CP1E-N60DR-A

UC1, N,

L, CE, KC

Transistor

(sinking) 0.30 0.31 0.02 CP1E-N60DT-A

Transistor

(sourcing)

0.30 0.31 0.02 CP1E-N60DT1-A

24 VDC

Relay -- 0.21 0.13 CP1E-N60DR-D

Transistor

(sinking) -- 0.31 0.02 CP1E-N60DT-D

Transistor

(sourcing)

-- 0.31 0.02 CP1E-N60DT1-D

NA-type

CPU Units

with 20 I/O

Points

(Built-in

analog)

100 to 240

VAC

(Built-in

analog

inputs: 2)

(Built-in

analog

outputs: 1)

Relay

steps

words

0.30 0.18 0.11 CP1E-NA20DR-A

UC1, N,

L, CE, KC

24 VDC

Transistor

(sinking) -- 0.23 0.09 CP1E-NA20DT-D

Transistor

(sourcing)

-- 0.23 0.09 CP1E-NA20DT1-D

Optional Products

Product

name Specifications Model

Standards

Battery Set For N/NA@@(S@)-type CP1E CPU Units

Note: Mount a Battery to an N/NA@@(S@)-type CPU Unit if the data in the following areas

must be backed up for power interruptions.

•DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C),

Counter Present Values (C), Auxiliary Area (A), and Clock Function

(Use batteries within two years of manufacture.)

CP1W-BAT01 --

Product name Specifications Model Standards

RS-232C Option Board

One RS-232C Option Board can be mounted to the Option Board slot.

One RS-232C connector is included. CP1W-CIF01

UC1, N,

L, CE, KC

RS-422A/485 Option Board

One RS-422A/485 Option Board can be mounted to the Option Board slot.

CP1W-CIF11

RS-422A/485 Isolated-type

Option Board

CP1W-CIF12

Ethernet Option Board One Ethernet Option Board can be mounted to the Option Board slot.

CP1E CPU Units are supported by CP1W-CIF41 version 2.0 or higher.

When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required.

CP1W-CIF41

Analog Input Option Board

Can be mounted in CPU Unit Option Board slot.

2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA (Resolution:1/2000). CP1W-ADB21 *

Analog Output Option Board

Can be mounted in CPU Unit Option Board slot.

2 analog outputs. 0-10V (Resolution:1/4000). CP1W-DAB21V *

Analog I/O Option Board Can be mounted in CPU Unit Option Board slot.

2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA(Resolution:1/2000).

2 analog outputs. 0-10V (Resolution:1/4000).

CP1W-MAB221 *

Product

name

Specifications External

power

supply

(24 VDC)

(A)

Current

consumption (A)

Model

Standards

Power

Supply Inputs Outputs Output

type

Program

capacity

Data

memory

capacity

5 V 24 V

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■

Expansion I/O Units and Expansion Units (for CP1E E30/40/60(S), N30/40/60(S

), or NA20 CPU Units)

CP1E E10/14/20(S) or N14/20 CPU Units do not support Expansion I/O Units and Expansion Units.

■I/O Connecting Cable

Note: An I/O Connecting Cable (approx. 6 cm) for horizontal connection is provided with CP1W Expansion I/O Units and Expansion Units.

Unit type Product name Specifications Current

consumption (A) Model Standards

Inputs Outputs Output type 5 V 24 V

CP1W

Expansion

I/O Units

Input Unit

8 -- 24 VDC Input 0.018 -- CP1W-8ED

U, C, N, L,

CE, KC

Output Units

-- 8

Relay 0.026 0.044 CP1W-8ER

Transistor (sinking)

0.075 -- CP1W-8ET

Transistor (sourcing)

0.075 -- CP1W-8ET1

-- 16

Relay 0.042 0.090 CP1W-16ER

N, L, CE, KC

Transistor (sinking)

0.076 -- CP1W-16ET

Transistor (sourcing)

0.076 -- CP1W-16ET1

-- 32

Relay 0.049 0.131 CP1W-32ER

N, L, CE, KC

Transistor (sinking)

0.113 -- CP1W-32ET

Transistor (sourcing)

0.113 -- CP1W-32ET1

I/O Units

12 8

Relay 0.103 0.044 CP1W-20EDR1

U, C, N, L,

CE, KC

Transistor (sinking)

0.130 -- CP1W-20EDT

Transistor (sourcing)

0.130 -- CP1W-20EDT1

24 16

Relay 0.080 0.090 CP1W-40EDR

N, L, CE, KC

Transistor (sinking)

0.160 -- CP1W-40EDT

Transistor (sourcing)

0.160 -- CP1W-40EDT1

CP1W

Expansion

Units

Analog Input

Unit

4CH --

Input range: 0 to 5 V, 1 to 5 V,

0 to 10 V, ±10 V,

0 to 20 mA, or 4 to 20 mA.

Resolution:

1/6000 0.100 0.090 CP1W-AD041 UC1, N, L,

CE, KC

Resolution:

1/12000 0.100 0.050 CP1W-AD042 UC1, N,

CE, KC

Analog Output

Unit -- 2CH

Output range: 1 to 5 V, 0 to

10 V, ±10 V,

0 to 20 mA, or 4 to 20 mA.

Resolution:

1/6000 0.040 0.095 CP1W-DA021 UC1, N, L,

CE, KC

-- 4CH

Resolution:

1/6000 0.080 0.124 CP1W-DA041

Resolution:

1/12000 0.070 0.160 CP1W-DA042 UC1, N,

CE, KC

Analog I/O Unit 4CH 4CH Input range: 0 to 5 V, 1 to 5 V,

0 to 10 V, ±10 V,

0 to 20 mA, or 4 to 20 mA.

Output range: 1 to 5 V, 0 to

10 V, ±10 V,

0 to 20 mA, or 4 to 20 mA.

Resolution:

1/12000 0.120 0.170 CP1W-MAD44 UC1, N,

CE, KC

4CH 2CH Resolution:

1/12000 0.120 0.120 CP1W-MAD42

2CH 1CH Resolution:

1/6000 0.083 0.110 CP1W-MAD11 UC1, N, L,

CE, KC

Temperature

Sensor Unit

2CH -- Sensor type: Thermocouple (J or K) 0.040 0.059 CP1W-TS001

UC1, N, L,

CE, KC

4CH -- Sensor type: Thermocouple (J or K) 0.040 0.059 CP1W-TS002

2CH --

Sensor type: Platinum resistance

thermometer

(Pt100 or JPt100) 0.054 0.073 CP1W-TS101

4CH --

Sensor type: Platinum resistance

thermometer

(Pt100 or JPt100)

0.054 0.073 CP1W-TS102

4CH --

Sensor type: Thermocouple

(J or K)

2channels can be used as

analog input.

Input range: 1 to 5 V, 0 to 10

V, 4-20 mA

Resolution:

1/12000 0.070 0.030 CP1W-TS003 UC1, N,

CE, KC

12CH -- Sensor type: Thermocouple (J or K) 0.080 0.050 CP1W-TS004

CompoBus/S

I/O Link Unit

8 8 CompoBus/S slave 0.029 -- CP1W-SRT21 UC1, N, L,

CE, KC

Product name Specifications Model Standards

I/O Connecting Cable 80 cm (for CP1W Expansion I/O Units and Expansion Units)

Only one I/O Connecting Cable can be used in each PLC. CP1W-CN811 UC1, N, L, CE

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■DIN Track Accessories

Name Specifications Model Standards

DIN Track

Length: 0.5 m; Height: 7.3 mm PFP-50N

---

Length: 1 m; Height: 7.3 mm PFP-100N

Length: 1 m; Height: 16 mm PFP-100N2

End Plate A stopper to secure the Units on the DIN Track. PFP-M

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

■Software

Note: 1. The E20/30/40(S), N20/N30/N40(S) CPU Units are supported by CX-Programmer version 8.2 or higher.

The E10, E14, N14, N60, and NA20 CPU Units are supported by CX-Programmer version 9.03 or higher. When Micro PLC Edition CX-

Programmer is used, you need version 9.03 or higher.

The E60S CPU Units are supported by CX-Programmer version 9.42 or higher. When Micro PLC Edition CX-Programmer is used, you

need version 9.42 or higher.

2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.

*Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.

The following tables lists the Support Software that can be installed from CX-One

Note: For details, refer to the CX-One Catalog (Cat. No. R134).

Unit Versions

Unit Versions and Programming Devices

The following tables show the relationship between unit versions and CX-Programmer versions.

Note: 1. To update the CX-Programmer, the CX-One version 3/version 4 auto-update must be installed.

2. Use the CX-Programmer version 9.12 or higher, when the CP1W-CIF41 is applied.

* 1 A Programming Console cannot be used.

* 2 Supports Smart Input function.

* 3 Does not support Smart Input function.

Programming Devices

Product name

Specifications

Model Standards

Number of

licenses Media

FA Integrated Tool

Package

CX-One Lite

Ver.4.@

CX-One Lite is a subset of the complete CX-One package that provides only the

Support Software required for micro PLC applications.

CX-One Lite runs on the following OS.

OS: Windows XP (Service Pack 3 or higher, 32-bit version) / Windows Vista

(32-bit/64-bit version) / Windows 7 (32-bit/64-bit version) / Windows 8 (32-

bit/64-bit version) / Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-

bit/64-bit version)

CX-One Lite Ver. 4.@ includes Micro PLC Edition CX-Programmer Ver.9.@.

1 license DVD CXONE-LT01D-V4 --

FA Integrated Tool

Package

CX-One

Package Ver. 4.@

CX-One is a comprehensive software package that integrates Support Software

for OMRON PLCs and components. CX-One runs on the following OS.

OS: Windows XP (Service Pack 3 or higher, 32-bit version) / Windows Vista

(32-bit/64-bit version) / Windows 7 (32-bit/64-bit version) / Windows 8 (32-

bit/64-bit version) / Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-

bit/64-bit version)

CX-One Ver. 4.@ includes CX-Programmer Ver. 9.@.

1 license *DVD CXONE-AL01D-V4 --

Support Software in CX-One CX-One Lite

Ver.4.@CX-One

Ver.4.@Support Software in CX-One CX-One Lite

Ver.4.@CX-One

Ver.4.@

Micro PLC Edition CX-Programmer Ver.9.@Yes No CX-Drive Ver.1.@Yes Yes

CX-Programmer Ver.9.@No Yes CX-Process Tool Ver.5.@No Yes

CX-Integrator Ver.2.@Yes Yes Faceplate Auto-Builder for NS Ver.3.@No Yes

Switch Box Utility Ver.1.@Yes Yes CX-Designer Ver.3.@Yes Yes

CX-Protocol Ver.1.@No Yes NV-Designer Ver.1.@Yes Yes

CX-Simulator Ver.1.@Yes Yes CX-Thermo Ver.4.@Yes Yes

CX-Position Ver.2.@No Yes CX-ConfiguratorFDT Ver.1.@Yes Yes

CX-Motion-NCF Ver.1.@No Yes CX-FLnet Ver.1.@No Yes

CX-Motion-MCH Ver.2.@No Yes Network Configurator Ver.3.@Yes Yes

CX-Motion Ver.2.@No Yes CX-Server Ver.4.@Yes Yes

Units Model numbers Unit version

CP1E CPU Units

CP1E-E@@SDR-A

CP1E-N@@S@D@-@

CP1E-E@@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

Unit version 1.@

CPU Unit Functions

Required Programming Device *1

CX-Programmer Micro PLC Edition CX-Programmer

CX-

Programmer

for CP1E

Ver.8.2 or

higher

Ver.9.03

or higher

Ver.9.42

or higher

Ver.8.2 or

higher

Ver.9.03

or higher

Ver.9.42

or higher Ver.1.0

CP1E-E20/30/40(S)D@-A

CP1E-N20/30/40(S@)D@-@Unit version 1.@

functions

Yes

CP1E-E10D@-@

CP1E-@14(S)D@-@

CP1E-N60(S@)D@-@

CP1E-NA20D@-@

Unit version 1.@

functions No Yes

Yes

*2No Yes

Yes

*2No

CP1E-E60SDR-A Unit version 1.@

functions No No Yes

*2No No Yes

*2No

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

General Specifications

* 1 Total of 110 mm with mounting brackets.

* 2 Excluding cables.

* 3 Use the external power supply to power input devices. Do not use it to drive output devices.

* 4

This is the rated value for the maximum system configuration. Use the following formula to calculate power consumption for CPU Units with DC power.

Formula: DC power consumption = (5V current consumption ✕ 5 V/70% (internal power efficiency) + 24V current consumption) ✕ 1.1(current

fluctuation factor)

The above calculation results show that a DC power supply with a greater capacity is required.

Type AC power supply models DC power supply models

Model CP1E-@@@S@D@-A

CP1E-@@@D@-A

CP1E-@@@S@D@-D

CP1E-@@@D@-D

Enclosure Mounted in a panel

Dimensions (H × D × W)

E/N/NA@@-type

CPU Unit with 10 I/O points (CP1E-E10D@-@): 90mm *1 × 85mm *2 × 66 mm

CPU Unit with 14 or 20 I/O points (CP1E-@14D@-@/@20D@-@): 90mm *1 × 85mm *2 × 86 mm

CPU Unit with 30 I/O points (CP1E-@30D@-@): 90mm *1 × 85mm *2 × 130 mm

CPU Unit with 40 I/O points (CP1E-@40D@-@): 90mm *1 × 85mm *2 × 150 mm

CPU Unit with 60 I/O points (CP1E-N60D@-@): 90mm *1 × 85mm *2 × 195 mm

CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D@-@): 90mm *1 × 85mm *2 × 130 mm

E/N/@@S(1)-type

CPU Unit with 14 or 20 I/O points (CP1E-@14SD@-@/@20SD@-@): 90mm *1 × 79mm *2 × 86 mm

CPU Unit with 30 I/O points (CP1E-@30S(1)D@-@): 90mm *1 × 79mm *2 × 130 mm

CPU Unit with 40 I/O points (CP1E-@40S(1)D@-@): 90mm *1 × 79mm *2 × 150 mm

CPU Unit with 60 I/O points (CP1E-@60S(1)D@-@): 90mm *1 × 79mm *2 × 195 mm

Weight

CPU Unit with 10 I/O points (CP1E-E10D@-@): 300g max.

CPU Unit with 14 I/O points (CP1E-@14(S)D@-@): 360g max.

CPU Unit with 20 I/O points (CP1E-@20(S)D@-@): 370g max.

CPU Unit with 30 I/O points (CP1E-@30(S@)D@-@): 600g max.

CPU Unit with 40 I/O points (CP1E-@40(S@)D@-@): 660g max.

CPU Unit with 60 I/O points (CP1E-@60(S@)D@-@): 850g max.

CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D@-@): 680g max.

Electrical

specifications

Supply voltage 100 to 240 VAC 50/60 Hz 24 VDC

Operating voltage range

85 to 264 VAC 20.4 to 26.4 VDC

Power consumption

15 VA/100 VAC max.

25 VA/240 VAC max.

(CP1E-E10D@-A/@14(S)D@-A/@20(S)D@-A)

9 W max. (CP1E-E10D@-D)

13 W max. (CP1E-N14D@-D/N20D@-D)

50 VA/100 VAC max.

70 VA/240 VAC max.

(CP1E-NA20D

-A/

30(S

-A/

40(S

-A/

N60(S@)D@-A)

20 W max.

(CP1E-NA20D

-D/N30

(S@)

-D/N40

(S@)

-D/

N60

(S@)

-D)

Inrush current

120 VAC, 20 A for 8 ms max. for cold start at room

temperature

240 VAC, 40 A for 8 ms max. for cold start at room

temperature

24 VDC, 30 A for 20 ms max. for cold start at room

temperature

External power supply

Not provided.

(CP1E-E10D@-A/@14(S)D@-A/@20(S)D@-A)

24 VDC, 300 mA

(CP1E-NA20D@-A/@30D@-A/@40D@-A/@60D@-A/

@30SDR-A/@40SDR-A/@60SDR-A)

Not provided

Insulation resistance 20 MΩ min. (at 500 VDC) between the external AC

terminals and GR terminals

Except between DC primary current and DC

secondary current

Dielectric strength 2,300 VAC 50/60Hz for 1 min between AC external

and GR terminals Leakage current: 5 mA max.

Except between DC primary current and DC

secondary current

Power OFF detection

time 10 ms min. 2 ms min.

Application

environment

Ambient operating

temperature 0 to 55 °C

Ambient humidity 10% to 90%

Atmosphere No corrosive gas.

Ambient storage

temperature -20 to 75 °C (excluding battery)

Altitude 2,000 m max.

Pollution degree 2 or less: Conforms to JIS B3502 and IEC 61131-2.

Noise resistance 2 kV on power supply line (Conforms to IEC61000-4-4.)

Overvoltage category Category II: Conforms to JIS B3502 and IEC 61131-2.

EMC Immunity Level Zone B

Vibration resistance

Conforms to JIS 60068-2-6.

5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz

Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)

Shock resistance Conforms to JIS 60068-2-27.

147 m/s2, 3 times in X, Y, and Z directions

Terminal block Fixed (not removable)

Terminal screw size M3

Applicable standards Conforms to EC Directive

Grounding method Ground to 100 Ω or less.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Performance Specifications

Item CP1E-E@@SD@-@

CP1E-@@D@-@

CP1E-N@@S@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

Program capacity

2 K steps (8 Kbytes) including the symbol table,

comments, and program indices of the CX-Programmer

8 K steps (32 Kbytes) including the symbol table,

comments, and program indices of the CX-Programmer

Control method Stored program method

I/O control method Cyclic scan with immediate refreshing

Program language Ladder diagram

Instructions Approximately 200

Processing

speed

Overhead processing time 0.4 ms

Instruction execution times Basic instructions (LD): 1.19 µs min.

Special instructions (MOV): 7.9 µs min.

Number of CP1W-series Expansion Units

connected

CP1E-E10D@-@/@14(S)D@-@/@20(S)D@-@: None

CP1E-@30(S@)D@-@/@40(S@)D@-@/@60(S@)D@-@/NA20(S@)D@-@: 3 units

Maximum number of I/O points

CP1E-E10D@-@: 10

CP1E-@14(S)D@-@: 14

CP1E-@20(S)D@-@: 20

CP1E-@30(S@)D@-@: 150 (30 built in, 40 × 3 expansion)

CP1E-@40(S@)D@-@: 160 (40 built in, 40 × 3 expansion)

CP1E-@60(S@)D@-@: 180 (60 built in, 40 × 3 expansion)

CP1E-NA20D@-@: 140 (20 built in, 40 × 3 expansion)

Built-in I/O

CP1E-E10D@-@: 10 (6 inputs, 4 outputs)

CP1E-@14(S)D@-@: 14 (8 inputs, 6 outputs)

CP1E-@20(S)D@-@: 20 (12 inputs, 8 outputs)

CP1E-@30(S@)D@-@: 30 (18 inputs, 12 outputs)

CP1E-@40(S@)D@-@: 40 (24 inputs, 16 outputs)

CP1E-@60(S@)D@-@: 60 (36 inputs, 24 outputs)

CP1E-NA20D@-@: 20 (12 inputs, 8 outputs)

Built-in input

functions

High-speed

counters

High-speed

counter mode/

maximum

frequency

Incremental Pulse Inputs

10 kHz: 6 counters

5 counters (only for 10 I/O points)

Up/Down Inputs

10 kHz: 2 counters

Pulse + Direction Inputs

10 kHz: 2 counters

Differential Phase Inputs (4x)

5 kHz: 2 counters

Incremental Pulse Inputs

100 kHz: 2 counters,10 kHz: 4 counters

Up/Down Inputs

100 kHz: 1 counters,10 kHz: 1 counters

Pulse + Direction Inputs

100 kHz: 2 counters

Differential Phase Inputs (4x)

50 kHz: 1 counter, 5 kHz: 1 counter

Counting

mode

Linear mode

Ring mode

Count value 32 bits

Counter reset

modes

Phase Z and software reset (excluding increment pulse input)

Software reset

Control

method

Target Matching

Range Comparison

Input interrupts 6 inputs (4 inputs only for 10 I/O points)

Interrupt input pulse width: 50 µs min.

Quick-response Inputs 6 inputs (4 inputs only for 10 I/O points)

Input pulse width: 50 µs min.

Normal input Input

constants

Delays can be set in the PLC Setup (0 to 32 ms, default: 8 ms).

Set values: 0, 1, 2, 4, 8, 16, or 32 ms

Built-in output

functions

Pulse outputs

(Models with

transistor

outputs only)

Pulse output

method and

output

frequency

Pulse output function not included

Pulse + Direction Mode

1 Hz to 100 kHz: 2 outputs

Output mode Continuous mode (for speed control)

Independent mode (for position control)

Number of

output pulses

Relative coordinates: 0000 0000 to 7FFF FFFF hex

(0 to 2147483647)

Absolute coordinates: 8000 0000 to 7FFF FFFF hex

(-2147483647 to 2147483647)

Acceleration/

deceleration

curves

Trapezoidal acceleration and deceleration

(Cannot perform S-curve acceleration and

deceleration.)

Changing SVs

during

instruction

execution

Only target position can be changed.

Origin

searches Included

Pulse outputs

(Models with

transistor

outputs only)

Frequency

PWM output function not included

2.0 to 6,553.5 Hz (in increments of 0.1 Hz) with 1 output

or 2 Hz to 32,000 Hz (in increments of 1 Hz) with 1 output

Duty factor

0.0% to 100.0% (in increments of 0.1%)

Accuracy: +1%/-0% at 2 Hz to 10,000 Hz and

+5%/-0% at 10,000 Hz to 32,000 kHz

Output mode Continuous Mode

Built-in analog Analog input Analog function not included Setting range: 0 to 6,000 (2 channels only for NA-type)

Analog output Setting range: 0 to 6,000 (1 channels only for NA-type)

Analog adjusters E/N/NA@@-type: 2 adjusters (Setting range: 0 to 255)

E/N@@S(1)-type: None

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Item CP1E-E@@SD@-@

CP1E-E@@D@-@

CP1E-N@@S@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

Communications

B-type Peripheral USB Port Conforming to USB 2.0 B type connector

Transmission

distance 5 m max.

Built-in RS-232C port

No built-in RS-232C port

Interface: Conforms to EIA RS-232C.

Communications

method Half duplex

synchronization

Start-stop

Baud rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps

Transmission

distance 15 m max.

Supported

protocol

•Host Link

•1:N NT Link

•No-protocol mode

•Serial PLC Links (master, slave)

•Modbus-RTU Easy Master

Built-in RS-485 port

No built-in RS-485 port

N30/40/60S1-type only

Interface: Conforms to EIA RS-485. 2-wire sensors

No isolation

Communications

method Half duplex

synchronization

Start-stop

Baud rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps

Transmission

distance 50 m max.

Supported

protocol

•Host Link

•1:N NT Link

•No-protocol mode

•Serial PLC Links (master, slave)

•Modbus-RTU Easy Master

Serial Option port

Option Board cannot be mounted.

N30/40/60 and NA20-type only

1 port

Mountable

Option Boards

•One RS-232C port: CP1W-CIF01

•

One RS-422A/485 port (not isolated): CP1W-CIF11

•One RS-422A/485 port (isolated): CP1W-CIF12

•One Ethernet port: CP1W-CIF41

Communications

method Depends on Option Board.

synchronization

Depends on Option Board.

Baud rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps

Compatible

protocols

•Host Link

•1:N NT Link

•No-protocol mode

•Serial PLC Links (master, slave)

•Modbus-RTU Easy Master

Number of tasks

•One cyclic execution task

•One scheduled interrupt task (always interrupt task 1)

•Six input interrupt tasks (interrupt tasks 2 to 7)

•Sixteen high-speed counter interrupt tasks (interrupt tasks 1 to 16)

Maximum subroutine number 128

Maximum jump number 128

Scheduled interrupt tasks 1 interrupt task

Clock

Clock function not included.

The time of error occurrence displays 01-01-01

01:01:01 Sunday

Included.

Accuracy (monthly deviation):

-4.5 min to -0.5 min at ambient temperature of 55oC,

-2.0 min to +2.0 min at ambient temperature of 25oC,

-2.5 min to +1.5 min at ambient temperature of 0oC

Memory

backup

Built-in EEPROM Ladder programs and parameters are automatically saved to built-in EEPROM

A section of the Data Memory Area can be saved to the built-in EEPROM.

Battery backup With

CP1W-BAT01 Battery

(Sold separately)

Battery cannot be mounted.

CP1W-BAT01 can be used.

Maximum battery service life: 5 years

Backup Time

Guaranteed value (ambient temperature: 55oC):

13,000 hours (approx. 1.5 years)

Effective value (ambient temperature: 25oC):

43,000 hours (approx. 5 years)

CIO Area

Input Bits 1,600 bits (100 words): CIO 0.00 to CIO 99.15 (CIO 00 to CIO 99)

Output Bits 1,600 bits (100 words): CIO 100.00 to CIO 199.15 (CIO 100 to CIO 199)

Serial PLC Link Words 1,440 bits (90 words): CIO 200.00 to CIO 289.15 (words CIO 200 to CIO 289)

Work Area (W) 1,600 bits (100 words): W0.00 to W99.15 (W0 to W99)

Holding Area (H) 800 bits (50 words): H0.00 to H49.15 (H0 to H49)

Bits in this area maintain their ON/OFF status when operating mode is changed.

Auxiliary Area (A) Read-only: 7,168 bits (448 words) A0 to A447

Read/write: 4,896 bits (306 words) in words A448 to A753

Temporary Relay Area (TR) (TR Area) 16 bits: TR0 to TR15

Timer Area (T) 256 timer numbers (T0 to T255 (separate from counters))

Counter Area (C) 256 counter numbers (C0 to C255 (separate from timers))

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Data Memory Area (D)

2 Kwords: D0 to D2047

Of these, 1,500 words can be saved to the backup

memory (built-in EEPROM) using settings in the

Auxiliary Area.

8 Kwords: D0 to D8191

Of these, 7,000 words can be saved to the backup

memory (built-in EEP-ROM) using settings in the

Auxiliary Area

Operating modes

PROGRAM mode: Program execution is stopped.

Preparations can be executed prior to program execution in this mode.

MONITOR mode: Programs are executed.

Some operations, such as online editing, and changes to present values in I/O memory, are

enabled in this mode.

RUN mode: Programs are executed.

This is the normal operating mode.

Item CP1E-E@@SD@-@

CP1E-E@@D@-@

CP1E-N@@S@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Internal Memory in the CPU Units

CPU Unit Memory Backup Structure

The internal memory in the CPU Unit consists of built-in RAM and built-in EEPROM. The built-in RAM is used as execution memory and the built-

in EEPROM is used as backup memory.

●Precautions for Correct Use

Create a system and write the ladder programs so that problems will not occur in the system if the data in these area may be unstable.

•Data in areas such as the DM area (D), Holding Area (H), the Counter Present Values (C) and the status of Counter Completion Flags (C), which

is retained by the battery, may be unstable when the power supply is turned off (Except for the DM area that are retained by the built-in EEP-

ROM using the Auxilliary Area bit.)

•The error log, and clock data (N/NA@@(S@)-type CPU Unit only) in the Auxiliary Area will become unstable. Other words and bits in the Auxiliary

Area will be cleared to their default values.

The built-in capacitor’s backup time varies with the ambient temperature as shown in the following graph.

CPU Unit

Built-in EEPROM Built-in RAM

Backup memory

User Program Area

(Backup)

PLC Setup PLC Setup

DM Area DM Area

User Program Area

I/O Memory Areas

Data is retained even if the power

supply is interrupted for longer

than the backup time of the built-in

capacitor.

Execution Memory

Automatic backup

Read at startup

Automatic backup

Read at startup

Backup using bit in Auxiliary Area

DM Area data read at startup

If a CP1W-BAT01 Battery (sold separately)

is mounted to an N/NA@@(S@)-type CPU

Unit, which is normally backed up by a

built-in capacitor, data will be backed up by

the battery.

Area where data is backed up

even if the power supply is

interrupted for longer than the

back-up time of the built-in

capacitor.

Area where data is cleared if

the power supply is

interrupted for longer than the

back-up time of the built-in

capacitor.

Backup time of built-in capacitor

50 hours

40 hours

25 hours

20 hours

9 hours

7 hours

CP1E E@@(S)-type CPU Unit

CP1E N/NA@@(S@)-type CPU Unit

Ambient temperature

25 40 60

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

I/O Memory Areas

Data can be read and written to I/O memory from the ladder programs. I/O memory consists of an area for I/O with external devices, user areas,

and system areas.

I/O Memory Areas

Name No. of bits Word addresses Remarks

CIO Area

Input Bits 1,600 bits (100 words) CIO 0 to CIO 99 For NA-type, CIO90, CIO91 is occupied by analog input 0, 1.

Output Bits 1,600 bits (100 words) CIO 100 to CIO 199 For NA-type, CIO190 is occupied by analog output 0.

Serial PLC Link Words 1,440 bits (90 words) CIO 200 to CIO 289 --

Work Area (W) 1,600 bits (100 words) W0 to W99 --

Holding Area (H) 800 bits (50 words) H0 to H49

Data in this area is retained during power interruptions if a

Battery Set (sold separately) is mounted to an N/NA@@(S@)-

type CPU Unit.

Data Memory Area (D)

E@@(S)-type CPU Unit 2K words D0 to D2047

Data in specified words of the DM Area can be retained in the

built-in EEPROM in the backup memory by using a bit in the

Auxiliary Area.

Applicable words: D0 to D1499

(One word can be specified at a time.)

N/NA@@(S@)-type CPU

Unit 8K words D0 to D8191

Data in specified words of the DM Area can be retained in the

built-in EEPROM in the backup memory by using a bit in the

Auxiliary Area.

Applicable words: D0 to D6999

(One word can be specified at a time.)

Timer Area (T) Present values 256 T0 to T255 --

Timer Completion Flags 256 --

Counter Area (C) Present values 256 C0 to C255

Data in this area is retained during power interruptions if a

Battery Set (sold separately) is mounted to an N/NA@@(S@)-

type CPU Unit.

Counter Completion Flags 256 --

Auxiliary Area (A)

Read only 7168 bits (448 words) A0 to A447 Data in this area is retained during power interruptions if a

Battery Set (sold separately) is mounted to an N/NA@@(S@)-

type CPU Unit.

Read-write 4,896 bits (306 words) A448 to A753

Input bits (starting from CIO 0)

User Areas

Holding Area (H)

DM Area (D)

Timer Area (T)

Counter Area (C)

Output bits (starting from CIO 100)

Work Area (W)

System Areas

Auxiliary Area

(A)

Condition Flags

Clock Pulses

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Backing Up and Restoring DM Area Data

The contents of the DM Area (D) will become unstable if the power supply is interrupted for longer than the backup time of the built-in capacitor

(50 hours for an E@@(S)-type CPU Unit, 40 hours for an N/NA@@(S@)-type CPU Unit without a Battery).

The contents of the specified words in the DM Area data can be backed up from RAM to the built-in EEPROM backup memory during operation

by turning ON a bit in the Auxiliary Area. The number of DM Area words to back up is specified in the Number of CH of DM for backup Box in the

PLC Setup. If the Restore D0- from backup memory Check Box is selected in the PLC Setup, the backup data will automatically be restored to

RAM when the power is turned back ON so that data is not lost even if power is interrupted.

Conditions for Executing Backup

Specified words starting from D0 in the RAM can be saved to the built-in EEPROM backup memory by turning ON A751.15.

(These words are called the DM backup words and the data is called the DM backup data.)

A751.15 (DM Backup Save Start Bit) can be used in any operating mode (RUN, MONITOR, or PROGRAM mode).

Words That Can Be Backed Up

•E@@(S)-type CP1E CPU Units: D0 to D1499

•N/NA@@(S@)-type CP1E CPU Units: D0 to D6999

Number of Words To Back Up

The number of words to back up starting from D0 is set in the Number of CH of DM for backup Box in the Startup Data Read Area in the PLC Setup.

Restoring DM Backup Data to RAM When Power Is Turned ON

The DM backup data can be restored to RAM when power is turned ON by selecting the Restore D0- from backup memory Check Box in the

Startup Data Read Area in the PLC Setup.

The DM backup data will be read from the backup memory even if the Clear retained memory area (HR/DM/CNT) Check Box is selected in the

PLC Setup.

D(n-1)

Built-in RAM

CP1E CPU Unit

A751.15 (DM Backup Save Start Bit) turned ON

DM Area (D) Data backed up

Built-in EEPROM Backup Memory

DM backup data

Specified number of words

Specify the number of words starting

from D0 in the Number of CH of DM

for backup Box in the Startup Data

Read Area in PLC Setup.

DM backup data is restored to the RAM when power supply is

turned ON again if the Restore D0- from backup memory Check

Box is selected in the Startup Data Read Area in the PLC Setup.

Data restored

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Built-in Inputs

Terminal Arrangements

●Input Terminal Arrangement for CPU Unit with 10 I/O Points

AC power supply models

DC power supply models

●Input Terminal Arrangement for CPU Unit with 14 I/O Points

AC power supply models

DC power supply models

●Input Terminal Arrangement for CPU Unit with 20 I/O Points

AC power supply models

DC power supply models

●Input Terminal Arrangement for CPU Unit with 30 I/O Points

AC power supply models

DC power supply models

CIO 0

L1 L2/N COM 01 03 05

00 02 04NC

+−COM 01 03 05

00 02 04NC

CIO 0

L1 L2/N COM 01 03 05 07 NC NC

00 02 04 06 NC NCNC

+−COM 01 03 05 07 NC NC

00 02 04 06 NC NCNC

CIO 0

L1 L2/N COM 01 03 05 07 09 11

00 02 04 06 08 10NC

CIO 0

+−

COM 01 03 05 07 09 11

00 02 04 06 08 10NC

L1 L2/N COM

01 03 05 07 09 11

00 02 04 06 08 10

01 03 05

00 02 04

CIO 0 CIO 1

+−

COM

NC NC

01 03 05 07 09 11

00 02 04 06 08 10

01 03 05

00 02 04

CIO 0 CIO 1

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Input Terminal Arrangement for CPU Unit with 40 I/O Points

AC power supply models

DC power supply models

●Input Terminal Arrangement for CPU Unit with 60 I/O Points

AC power supply models

DC power supply models

●Input Terminal Arrangement for CPU Unit with 20 I/O Points and Built-in Analog

AC power supply models

DC power supply models

L1 L2/N COM 01 03 05

00 02 04

07 09 11

06 08 10

01 03 05

00 02 04

07 09 11

06 08 10

CIO 0 CIO 1

+−

COM

01 03 05

00 02 04

07 09 11

06 08 10

01 03 05

00 02 04

07 09 11

06 08 10

CIO 0 CIO 1

L1 L2/N COM 01 03 05

00 02 04

07 09 11

06 08 10

01 03 05

00 02 04

07 09 11

06 08 10

01 03 05

00 02 04

07 09 11

06 08 10

CIO 0 CIO 1 CIO 2

01 03 05 07 09 11

04 08

01 03 05 07 09 11

00 0000 02 04 06 08 10

01 03 05 07 09 11

02 04 06 08 10NC

+−

COM

06 10

L1 L2/N COM

COM1

01 03 05 07 09 11

00 02 04 06 08 10

I IN0 AG I IN1

VIN0

COM0

VIN1

CIO 0 CIO 90 CIO 91

COM

COM1

01 03 05 07 09 11

00NC 02 04 06 08 10

I IN0 AG I IN1

VIN0

COM0

VIN1

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Allocating Built-in Inputs to Functions

Input terminals are allocated functions by setting parameters in the PLC Setup. Set the PLC Setup so that each terminal is used for only one function.

CPU Unit with

I/O Points

Input terminal block

Settings in PLC Setup

Interrupt input setting on

Built-in Input Tab Page

High-speed counter 0 to 3 setting on

Built-in Input Tab Page

Origin search settings on Pulse

Output 0/1 Tab Page

Terminal

block

label

Terminal

number

Normal Interrupt Quick Single-phase

(increment

pulse input)

Two-phase

(differential

phase x4 or

up/down)

Two-phase

(pulse/

direction)

CPU Unit with

20 to 60 points

CPU Unit with

14 I/O points

Normal

input

Input

interrupt

Quick-

response

input

CIO 0

00 Normal

input 0 -- --

Counter 0,

increment input

Counter 0, phase

A or up input

Counter 0,

pulse input -- --

01 Normal

input 1 -- --

Counter 1,

increment input

Counter 0, phase

B or down input

Counter 1,

pulse input -- --

02 Normal

input 2

Interrupt

input 2

Quick-response

input 2

Counter 2,

increment input

Counter 1, phase

A or up input

Counter 0,

direction -- --

03 Normal

input 3

Interrupt

input 3

Quick-response

input 3

Counter 1, phase

B or down input

Counter 1,

direction --

Pulse 0, Origin

proximity input

signal

04 Normal

input 4

Interrupt

input 4

Quick-response

input 4

Counter 3,

increment input

Counter 0, phase

Z or reset input

Counter 0,

reset input -- --

05 Normal

input 5

Interrupt

input 5

Quick-response

input 5

Counter 4,

increment input

Counter 1, phase

Z or reset input

Counter 1,

reset input --

Pulse 1, Origin

proximity input

signal

06 Normal

input 6

Interrupt

input 6

Quick-response

input 6

Counter 5,

increment input

-- -- Pulse 0: Origin

input signal

Pulse 0, Origin

input signal

07 Normal

input 7

Interrupt

input 7

Quick-response

input 7

-- -- -- Pulse 1: Origin

input signal

Pulse 1, Origin

input signal

08 Normal

input 8 -- -- -- -- -- -- --

09 Normal

input 9 -- -- -- -- -- -- --

10 Normal

input 10 -- -- -- -- --

Pulse 0: Origin

proximity input signal

11 Normal

input 11 -- -- -- -- --

Pulse 1: Origin

proximity input signal

CIO 1

00 to 05

Normal

input 12

to17

-- -- -- -- -- -- --

40 06 to 11

Normal

input 18

to 23

-- -- -- -- -- -- --

60 CIO 2 00 to 11

Normal

input 24

to 35

-- -- -- -- -- -- --

These functions are supported only by

N/NA

)-type CPU Units with

transistor outputs.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Built-in Outputs

Terminal Arrangements

●Output Terminal Arrangement for CPU Unit

with 10 I/O Points

AC power supply model

DC power supply model

●Output Terminal Arrangement for CPU Unit

with 14 I/O Points

AC power supply model

DC power supply model

●Output Terminal Arrangement for CPU Unit with 20 I/O Points

AC power supply model

DC power supply model

●Output Terminal Arrangement for CPU Unit with 30 I/O Points

AC power supply model

E/N30(S@)D@-A

DC power supply model

N30D@-D

N30S(1)DT-D

Note: V- and COM(V-) are internally connected.

N30S(1)DT1-D

Note: V+ and COM(V+) are internally connected.

00 01 02 03

COM COM NC COM NC

CIO 100

00 01 02 03

COM COM NC COM

04 05 NC

COMNC

CIO 100

00 01 02 03

COM COM NC COM

04 05 07

COMNC

CIO 100

00 01 02 04 05 07 00

03 06

01 03

- COM COMCOM COM COM

CIO 100 CIO 101

00 01 02 04 05 07 00

03 06

01 03

NC COM COMCOM COM COM

CIO 100 CIO 101

100 CH 101 CH

00 01 02 04 05 07 00

03 06

01 03

V+

V- COM(V-) COM COM COM

100 CH 101 CH

00 01 02 04 05 07 00

03 06

01 03

V+

V- COM(V+) COM COM COM

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Output Terminal Arrangement for CPU Unit with 40 I/O Points

AC power supply model

E/N40(S@)D@-A

DC power supply model

N40D@-D

N40S(1)DT-D

Note: V- and COM(V-) are internally connected.

N40S(1)DT1-D

Note: V+ and COM(V+) are internally connected.

●Output Terminal Arrangement for CPU Unit with 60 I/O Points

AC power supply model

E/N60(S@)D@-A

DC power supply model

N60D@-D

N60S(1)DT-D

Note: V- and COM(V-) are internally connected.

N60S(1)DT1-D

Note: V+ and COM(V+) are internally connected.

+0001

02 03 04 06 00 01

COM COM 05 07 COM

03 04 06

02 05COMCOMCOM-

CIO 100 CIO 101

NC 00 01

02 03 04 06 00 01

COM COM 05 07 COM

03 04 06

02 05

COMCOMCOMNC

100 CH 101 CH

V+ 00 01

02 03 04 06 00 01

COM 05 07 COM

03 04 06

02 05

COM COM COM(V-)V-

100 CH 101 CH

V+ 00 01

02 03 04 06 00 01

COM 05 07 COM

03 04 06

02 05

COM COM COM(V+)V-

CIO 101

CIO 100 CIO 102

+ 0001020405070002040507

COMCOM- COM 03 COM 06 COM 01 03 COM 06

COM

CIO 101

CIO 100 CIO 102

NC 00 01 02 04 05 07 00 02 04 05 07

COMCOMNC COM 03 COM 06 COM 01 03 COM 06

COM

100 CH 101 CH

00 01

02 04 05 07 00 02

COM COM 06 COM

04 05 07

01 COM

102 CH

00 02

COM

04 05 07

01 COM0303

V+

COM(V-)V-

V+

100 CH 101 CH

00 01

02 04 05 07 00 02

COM COM 06 COM

04 05 07

01 COM

102 CH

00 02

COM

04 05 07

01 COM0303COM(V+)V-

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Output Terminal Arrangement for CPU Unit with 20 I/O Points and Built-in Analog

AC power supply model DC power supply model

Allocating Built-in Output Terminals to Functions

Output terminals are allocated functions by setting parameters in the PLC Setup. Set the PLC Setup so that each terminal is used for only one function.

CIO 100 CIO 190

00 01 02 04 05 07 NC

03 06

IOUT0

VOUT0

COM0

−COM COMCOM COM NC

CIO 100 CIO 190

01 04 05 07 NC

IOUT0

COM COM COM COM NC

03 06

VOUT0

COM0

CPU Unit with

I/O points

Output terminal

block

Other than those

shown right

When a pulse output instruction

(SPED, ACC, PLS2, or ORG) is

executed

Setting in PLC Setup When the PWM

instruction is executed

Origin search setting on

Pulse Output 0/1 Tab Page

Terminal

block label

Terminal

number Normal output Fixed duty ratio pulse output Variable duty ratio

pulse output

Pulse + direction Use PWM output

CIO 100

00 Normal output 0 Pulse output 0 (pulse) -- --

01 Normal output 1 Pulse output 1 (pulse) -- PWM output 0

02 Normal output 2 Pulse output 0 (direction) -- --

03 Normal output 3 Pulse output 1 (direction) -- --

04 Normal output 4 -- Pulse 0: Error counter reset

output --

05 Normal output 5 -- Pulse 1: Error counter reset

output --

06 Normal output 6 -- -- --

07 Normal output 7 -- -- --

CIO 101

00 to 03 Normal output 8 to 11 -- -- --

40 04 to 07 Normal output 12 to 15 -- -- --

60 CIO 102 00 to 07 Normal output 16 to 23 -- -- --

These functions are supported only by N/NA

)-type CPU Units with transistor outputs.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

I/O Specifications for CPU Units

Input Specifications

* 1 The bits that can be used depend on the model of CPU Unit.

* 2 The response time is the delay caused by hardware. The delay set in the PLC Setup (0 to 32 ms, default: 8 ms) for a normal input must be

added to this value.

Item Specification

Input type High-speed counter inputs or Normal

Inputs

High-speed counter inputs, interrupt

input, quick-response inputs, or Normal

Inputs

Normal inputs

Input bits CIO 0.00 to CIO 0.01 CIO 0.02 to CIO 0.07 *1

CIO 0.08 to CIO 0.11,

CIO 1.00 to CIO 1.11 and

CIO 2.00 to CIO 2.11 *1

Input voltage 24 VDC, +10%, -15%

Applicable sensors 2-wire and 3-wire sensors

Input Impedance 3.3 kΩ3.3 kΩ4.8 kΩ

Input current 7.5 mA typical 7.5 mA typical 5 mA typical

ON voltage/current 3 mA min. at 17.0 VDC min. 3 mA min. at 17.0 VDC min. 3 mA min. at 14.4 VDC min.

OFF voltage/current 1 mA max. at 5.0 VDC max. 1 mA max. at 5.0 VDC max. 1 mA max. at 5.0 VDC max.

ON response time *2E@@(S)-type CPU Unit: 50 µs min.

N/NA

)-type CPU Unit: 2.5 µs min.

50 µs max. 1 ms max.

OFF response time *2E@@(S)-type CPU Unit: 50 µs min.

N/NA

)-type CPU Unit: 2.5 µs min.

50 µs max. 1 ms max.

Circuit configuration

E@@(S)-type CPU Unit N/NA@@(S@)-type CPU Unit

Input 0.00 to 0.07

Input 0.08 to 0.11, 1.00 to 1.11

Input 0.00 to 0.01

Input 0.02 to 0.07

Inputs CIO 0.08 to CIO 0.11, CIO 1.00 to CIO 1.11 and

CIO 2.00 to CIO 2.11

Input indicator

COM

3.3kΩ

910Ω

1000pF

Internal

circuits

Internal

circuits

COM

4.8kΩ

750Ω

Input indicator

COM

3.3kΩ

4.3kΩ

1000pF

Input indicator

Internal

circuits

COM

910Ω

1000pF

3.3kΩ

Input indicator

Internal

circuits

COM

750Ω

4.8kΩInternal

circuits

Input indicator

OFF

OFF T1T2T3T4

T1, T2, T3, T4: 2.5 μs min.

90%

50%

10%

90%

50%

10%

90%

50%

10%

2.5 μs

min.

2.5 μs

min.

20.0 μs min.

10.0 μs min.

Up/down input mode Differential phase mode

Pulse plus direction input mode,

Increment mode

N/NA@@(S@)-type: 0.00/0.01 N/NA@@(S@)-type: 0.00/0.01

OFF

OFF T1T2T3T4T1, T2, T3, T4: 50 μs min.

90%

50%

10%

90%

50%

10%

90%

50%

10%

50 μs

min.

50 μs

min.

200 μs min.

100 μs min.

E@@(S)-type: 0.00 to 0.07

N/NA@@(S@)-type: 0.02 to 0.07

E@@(S)-type: 0.00 to 0.03

N/NA@@(S@)-type: 0.02/0.03

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Output Specifications

●Output Specifications for Relay Outputs

Estimating the Service Life of Relays

Under normal conditions, the service life of output contacts is as shown above. The service life of relays is as shown in the following diagram as a guideline

Relationship between Continuous Simultaneous ON Rate and Ambient Temperature

There are restrictions on the power supply voltage and output load current imposed by the ambient temperature. Make sure that the power supply

voltage and output load current are within the following ranges.

Note: The above restrictions apply to the relay output load current from the CPU Unit even if Expansion I/O Units are not connected.

Item Specification

Maximum switching capacity 250 VAC/2 A (cosφ = 1)

2 A, 24 VDC (4 A/common)

Minimum switching capacity 5 VDC, 10 mA

Service life of

relay

Electrical Resistive load 200,000 operations (24 VDC)

Inductive load 70,000 operations (250 VAC, cosφ = 0.4)

Mechanical 20,000,000 operations

ON delay 15 ms max.

OFF response time 15 ms max.

Circuit configuration

CP1E-@@DR-@

CP1E-N20DR-D CP1E-N30DR-D CP1E-N40DR-D

CP1E-@20@DR-A/N20DT@-@CP1E-NA20DR-A CP1E-N60DR-D

Output indicator

Internal

circuits

COM

OUT

250 VAC, 2A,

24 VDC, 2 A

max.

30-VDC/250-VAC

resistive load

125-VAC resistive load

125 VAC cosφ= 0.4

250 VAC cosφ= 0.4/

30 VDC, τ = 7ms

Contact current (A)

Life (x 104)

300

500

700

1000

200

100

0.1 0.2 0.3 0.5 0.7 1 2 3 5 7 10

50%

100%

˚C

Power voltage

21.6 VDC

Power voltage

20.4 VDC

Ambient temperature

50%

100

35 45 55˚C

Power voltage

21.6 VDC

Power voltage

20.4 VDC

Ambient temperature

30 45 50

50%

100%

˚C

Power voltage

21.6 VDC

Power voltage

20.4 VDC

Ambient temperature

50%

100%

˚C

Ambient temperature

80%

100%

55°C

0% 50

Ambient temperature

50%

100%

˚C

Power voltage

21.6 VDC

Power voltage

20.4 VDC

Ambient temperature

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Output Specifications for Transistor Outputs (Sinking or Sourcing)

Normal Outputs

Note: Do not connect a load to an output terminal or apply a voltage in excess of the maximum switching capacity.

* 1 Also do not exceed 0.9 A for the total for CIO 100.00 to CIO 100.03. (CIO 100.00 to CIO 100.03 is different common.)

* 2 The bits that can be used depend on the model of CPU Unit.

Pulse Outputs (CIO 100.00 and CIO 100.01)

Note: 1. The load for the above values is assumed to be the resistance load, and does not take into account the impedance for the connecting

cable to the load.

2. Due to distortions in pulse waveforms resulting from connecting cable impedance, the pulse widths in actual operation may be smaller

than the values shown above.

3. The OFF and ON refer to the output transistor. The output transistor is ON at level “L”.

Item

Specification

N@@(S@)-type

100.00, 100.01

N@@(S@)-type

100.02 to 102.07 *2

E10-type

100.00 to 100.03

N@@S(1)-type N@@-type

Maximum switching capacity

0.3 A/output, 0.9 A/common *1

4.5 to 30 VDC

CP1E-E10D@-@: 0.9 A/Unit CP1E-N40(S@)D@-@: 3.6 A/Unit

CP1E-N14D@-@: 1.5 A/Unit CP1E-N60(S@)D@-@: 5.4 A/Unit

CP1E-N20D@-@: 1.8 A/Unit CP1E-NA20D@-@: 1.8 A/Unit

CP1E-N30(S@)D@-@: 2.7 A/Unit

Minimum switching capacity 1 mA 4.5 to 30 VDC

Leakage current 0.1mA max.

Residual voltage 0.6 V max. 1.5V max.

ON response time 0.1 ms max. 0.1 ms max.

OFF response time 0.1 ms max. 1 ms max.

Fuse Not provided.

External Power Supply 20.4 to 26.4V VDC

30mA max. None None

Circuit configuration

N@@S (1)-type

sinking

sourcing

sinking

sourcing

N/NA@@-type

sinking

sourcing

Item Specification

Maximum switching capacity 100 mA/4.5 to 26.4 VDC

Minimum switching capacity 7 mA/4.5 to 26.4 VDC

Maximum output frequency 100 kHz

Output waveform

OUT

COM (V-)

V+

V-

4.5 to 30

VDC

20.4 to 26.4

VDC

Internal

circuits

Internal

circuits

OUT

COM (V+)

V+

V-

Internal

circuits

Internal

circuits

20.4 to 26.4

VDC

4.5 to 30

VDC

OUT

COM(–)

24 VDC,

4.5 to 30

VDC

Internal

circuits

OUT

COM(+)

24 VDC,

4.5 to 30

VDC

Internal

circuits

OUT

COM(–)

Internal

circuits

Internal

circuits

24 VDC,

4.5 to 30

VDC

OUT

COM(–)

Internal

circuits

Internal

circuits

24 VDC,

4.5 to 30

VDC

4μs min. 2μs min.

OFF 90

ON 10

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

PWM Output (CIO 100.01)

Note: The OFF and ON refer to the output transistor. The output transistor is ON at level “L”.

Built-in Analog I/O (NA-type CPU Units)

●Analog Input Specifications

●Analog Output Specifications

*In 0 to 20 mA mode, accuracy cannot be ensured at 0.2 mA or less.

●Shared I/O Specifications

Item Specification

Maximum switching capacity 30 mA/4.5 to 26.4 VDC

Maximum output frequency 32 kHz

PWM output accuracy For ON duty +1%, .0%:10 kHz output

For ON duty +5%, .0%: 0 to 32 kHz output

Output waveform

Item Voltage input Current input

Number of inputs 2 inputs (Allocated 2 words: CIO 90 to CIO 91.)

Input signal range 0 to 5 V, 1 to 5 V, 0 to 10 V, or -10 to 10 V 0 to 20 mA or 4 to 20 mA

Max. rated input ±15 V ±30 mA

External input impedance 1 MΩ min. Approx. 250Ω

Resolution 1/6000

Overall accuracy At 25°C ±0.3% full scale ±0.4% full scale

0 to 55°C ±0.6% full scale ±0.8% full scale

A/D conversion data -10 to +10 V F448 to 0BB8 hex Full Scale

Other ranges 0000 to 1770 hex Full Scale

Averaging function Supported (Set for individual inputs in the PLC Setup.)

Open-circuit detection function Supported (Value when disconnected: 8000 hex)

Item Voltage output Current output

Number of outputs 1 output (Allocated 1 word: CIO 190.)

Output signal range 0 to 5 V, 1 to 5 V, 0 to 10 V, or -10 to 10 V 0 to 20 mA or 4 to 20 mA

Allowable external output load resistance 1 kΩ min. 600Ω max.

External input impedance 0.5Ωmax. ---

Resolution 1/6000

Overall accuracy At 25°C ±0.4% full scale *

0 to 55°C ±0.8% full scale *

D/A conversion data -10 to +10 V F448 to 0BB8 hex Full Scale

Other ranges 0000 to 1770 hex Full Scale

Item Specification

Conversion time 2 ms/point (6 ms total for 2 analog inputs and 1 analog output.)

Isolation method Photocoupler isolation between analog I/O terminals and internal circuits.

No isolation between analog I/O signals.

ON duty=

100

OFF

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Specifications of Expansion I/O Units and Expansion Units

Expandable CPU Units

•Expansion I/O Units and Expansion Units cannot be connected to E10/14/20(S) or N14/20 CPU Units.

•A total of up to three Expansion I/O Units and Expansion Units can be connected to an E30/40/60(S), N30/40/60(S@), NA20 CPU Unit.

●CP1E E10/14/20(S) or N14/20CPU Unit

●CP1E E30/40(S), N30/40/60(S@) or NA20 CPU Unit

Connection Methods

Connection cables for the Expansion I/O Units and Expansion Units are used to connect the Units. The length can be extended by using a CP1W-

CN811 I/O Connection Cable (length: 800 m).

Maximum Number of I/O Points for an Expanded System

Restrictions on External Power Supply Capacity

The following restrictions apply when using the CPU Unit’s external power supply.

●AC-power-supply E30/40(S), N30/40/60(S@) or NA20 CPU Unit

The power supply capacity is restricted for AC-power-supplyE30/40/60(S), N30/40/60(S@), NA20 CPU Units. It may not be possible to use the full

300 mA of the external power supply, though a CPU Unit can connect any CP-series Expansion I/O Unit or Expansion Unit.

The entire 300 mA from the external power supply can be used if Expansion Units and Expansion I/O Units are not connected.

Refer to the CP1E CPU Unit Hardware Manual (Cat. No. W479) for details.

●AC-power-supply or DC-power-supply E10/14/20(S), N14/20(S) CPU Unit

There is no external power supply on AC-power-supply or DC-power-supply E10/14/20, N14/20 CPU Units.

CPU Unit

Built-in I/O on CPU Unit Built-in Analog Total number of

Expansion I/O Units and

Expansion Units that

can be connected

Number of inputs: 24

Number of outputs: 16

Total number of I/O points when three CP1W-40ED

Expansion I/O Units are connected

Total Number of

inputs

Number of

outputs AD DA Total Number of

inputs

Number of

outputs

CP1E-E10D@-@10 6 4

None None

Not possible.

10 6 4

CP1E-@14@D@-@14 8 6 14 8 6

CP1E-@20@D@-@20 12 8 20 12 8

CP1E-@30@D@-@30 18 12

3 Units maximum

150 90 60

CP1E-@40@D@-@40 24 16 160 96 64

CP1E-@60@D@-@60 36 24 180 108 72

CP1E-NA20D@-@20 12 8 2 1 140 84 56

CP-series Expansion Units and Expansion I/O

Units cannot be connected.

A total of up to three CP-series Expansion I/O Units

and Expansion Units can be connected.

COM

COM COM COM COM COM COM03 06 01 03 06

00 02 04 06 0810

00 01 02 04 05 07 00 02 04 05 07

00 02 04 06 0810

01 03 05 07 09 11 01 03 05 07 09 11

40EDR

OUT

CH CH

CH CH EXP

111009080706050403020100

0706050403020100

COM

COM COM COM COM COM COM03 06 01 03 06

00 02 04 06 0810

00 01 02 04 05 07 00 02 04 05 07

00 02 04 06 0810

01 03 05 07 09 11 01 03 05 07 09 11

40EDR

OUT

CH CH

CH CH EXP

111009080706050403020100

0706050403020100

COM

COM COM COM COM COM COM03 06 01 03 06

00 02 04 06 0810

00 01 02 04 05 07 00 02 04 05 07

00 02 04 06 0810

01 03 05 07 09 11 01 03 05 07 09 11

40EDR

OUT

CH CH

CH CH EXP

111009080706050403020100

0706050403020100

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Specifications of Expansion I/O Units

●Input Specifications (CP1W-40EDR/40EDT/40EDT1/20EDR1/20EDT/20EDT1/8ED)

Note: Do not apply voltage in excess of the rated voltage to the input terminal.

*The response time is the hardware delay value. The delay set in the PLC Setup (0 to 32 ms, default: 8 ms) must be added to this value. For the

CP1W-40EDR/EDT/EDT1, a fixed value of 16 ms must be added.

●Output Specifications

Relay Outputs (CP1W-40EDR/32ER/20EDR1/16ER/8ER)

Note: 1. Estimating the Service Life of Relays

The service life of output contacts is as shown in the following diagram.

Item Specification

Input voltage 24 VDC +10%/-15%

Input impedance 4.7 kΩ

Input current 5 mA typical

ON voltage 14.4 VDC min.

OFF voltage 5.0 VDC max.

ON delay 1 ms max. *

OFF delay 1 ms max. *

Circuit configuration

Item Specification

Max. switching capacity 2 A, 250 VAC (cosφ = 1),

2 A, 24 VDC (4 A/common)

Min. switching capacity 5 VDC, 10 mA

Service life of

relay

(See note.)

Electrical Resistive load 150,000 operations (24 VDC)

Inductive load 100,000 operations (240 VAC, cosφ = 0.4)

Mechanical 20,000,000 operations

ON delay 15 ms max.

OFF delay 15 ms max.

Circuit configuration

COM

4.7 kΩ

750 Ω

Input LED

Internal

circuits

COM

OUT

Output LED

Internal

circuits

Maximum

250 VAC: 2 A

24 VDC: 2 A

300

200

100

0.1 0.2 0.3 0.5 0.7 1 235

Life (× 104)

Contact current (A)

120 VAC resistive load

24 VDC τ = 7 ms

120 VAC cosφ = 0.4

240 VAC cosφ = 0.4

24 VDC/240 VAC resistive load

Switching rate: 1,800 operations/hour

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

2. Restrictions of CP1W-16ER/32ER

Limit the output load current to satisfy the following derating curve.

3. CP1W-32ER’s maximum number of simultaneously ON output points is 24 (75%).

Relation between Number of ON Outputs and Ambient Temperature (CP1W-32ER)

4. According to the ambient temperature, there are restrictions on power supply voltage and output load current for the CPU Units

connected with the Expansion I/O Units (CP1W-8ER/16ER/20EDR1/32ER/40EDR). Use the PLC in the range of the power supply

voltage and output load current as show below.

The ambient temperature is restricted for the power-supply CPU Units (CP1E-N/NA@@@@-@). Derating curve of the output load current

for Expansion I/O Units (CP1W-8ER/16ER/20EDR1/32ER/40EDR).

Connected to CP1E-N30DR-D Connected to CP1E-N40DR-D

Connected to CP1E-N30(S

)DT

-D Connected to CP1E-N40(S

)DT

-D

Connected to CP1E-N60DR-D/

CP1E-N60(S@)DT@-D

Connected to CP1E-NA20DT@-D Connected to CP1E-NA20DR-A

100

Ambient temperature(˚C)

Output load current(%)

Ambient temperature (˚C)

Number of inputs

ON simultaneously (%)

50%

100%

55°C4535

Power voltage:

21.6 VDC

Power voltage:

20.4 VDC

Ambient temperature

50%

100%

55°C45

0% 50

Power

voltage:

21.6 VDC

Power

voltage:

20.4 VDC

Ambient temperature

50%

100%

55°C4535

Power voltage:

21.6 VDC

Power voltage:

20.4 VDC

Ambient tem

erature

50%

100%

55°C4535

Power

voltage:

21.6 VDC

Power

voltage:

20.4 VDC

Ambient temperature

50%

100%

55°C45

0% 40

Power voltage:

21.6 VDC

Power voltage:

20.4 VDC

Ambient temperature

50%

100%

55°C45

0% 40

Power voltage:

21.6 VDC

Power voltage:

20.4 VDC

Ambient temperature

80%

100%

55°C

0% 50

Ambient temperature

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Transistor Outputs (Sinking or Sourcing)

*1 If the ambient temperature is maintained below 50°C, up to 0.9 A/common can be used.

*2 The fuse cannot be replaced by the user. Replace the Unit if the fuse breaks due to an short-circuit or overcurrent.

*3 Do not connect a load to an output terminal or apply a voltage in excess of the maximum switching capacity.

Item

Specification

CP1W-40EDT

CP1W-40EDT1

CP1W-32ET

CP1W-32ET1

CP1W-20EDT

CP1W-20EDT1

CP1W-16ET

CP1W-16ET1

CP1W-8ET

CP1W-8ET1

Max. switching capacity

4.5 to 30 VDC

0.3 A/output

4.5 to 30 VDC

0.3 A/output

24 VDC +10%/-5%

0.3 A/output

4.5 to 30 VDC

0.3 A/output

4.5 to 30 VDC

0.3 A/output

0.9 A/common

3.6 A/Unit

0.9 A/common

7.2 A/Unit

0.9 A/common

1.8 A/Unit

0.9 A/common

3.6 A/Unit

0.9 A/common

1.8 A/Unit

Leakage current 0.1 mA max. 0.1 mA max. 0.1 mA max. 0.1 mA max. 0.1 mA max.

Residual voltage 1.5 V max. 1.5 V max. 1.5 V max. 1.5 V max. 1.5 V max.

ON delay 0.1 ms max. 0.1 ms max. 0.1 ms. 0.1 ms max. 0.1 ms max.

OFF delay

1 ms max.

24 VDC +10%/-5%

5 to 300 mA

1 ms max.

24 VDC +10%/-5%

5 to 300 mA

1 ms max.

24 VDC +10%/-5%

5 to 300 mA

1 ms max.

24 VDC +10%/-5%

5 to 300 mA

1 ms max.

24 VDC +10%/-5%

5 to 300 mA

Max. number of

Simultaneously ON

Points of Output

16 pts (100%) 24 pts (75%) 8 pts (100%) 16 pts (100%) 8 pts (100%)

Fuse *21 fuse/common

Circuit configuration

COM (−)

OUT

COM (+)

OUT

Sinking Outputs Sourcing Outputs

Output LED

Internal

circuits

Internal

circuits

24 VDC/4.5

to 30 VDC

24 VDC/4.5

to 30 VDC

0.9

0.8

(A)

0(°C)

50 55

Ambient temperature

Total current for common

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Specifications of Expansion Units

●Analog Input Units

●Analog Output Units

Model CP1W-AD041 CP1W-AD042

Item Voltage Input Current Input Voltage Input Current Input

Number of inputs 4 inputs (4 words allocated)

Input signal range

0 to 5 VDC, 1 to 5 VDC,

0 to 10 VDC, or –10 to 10

VDC

0 to 20 mA or 4 to 20 mA

0 to 5 VDC, 1 to 5 VDC,

0 to 10 VDC, or -10 to 10

VDC

0 to 20 mA or 4 to 20 mA

Max. rated input ±15 V ±30 mA ±15 V ±30 mA

External input impedance 1 MΩ min. Approx. 250 Ω1 MΩ min. Approx. 250 Ω

Resolution 1/6000 (full scale) 1/12000 (full scale)

Overall accuracy 25°C0.3% full scale 0.4% full scale 0.2% full scale 0.3% full scale

0 to 55°C0.6% full scale 0.8% full scale 0.5% full scale 0.7% full scale

A/D conversion data

16-bit binary (4-digit hexadecimal)

Full scale for –10 to 10 V: F448 to 0BB8 Hex

Full scale for other ranges: 0000 to 1770 Hex

16-bit binary (4-digit hexadecimal)

Full scale for –10 to 10 V: E890 to 1770 Hex

Full scale for other ranges: 0000 to 2EE0 Hex

Averaging function Supported (Set in output words n+1 and n+2.)

Open-circuit detection function Supported

Conversion time 2 ms/point (8 ms/all points) 1 ms/point (4 ms/all points)

Isolation method Photocoupler isolation between analog I/O terminals and internal circuits. No isolation between analog I/O signals.

Current consumption 5 VDC: 100 mA max.; 24 VDC: 90 mA max. 5 VDC: 100 mA max.; 24 VDC: 50 mA max.

Model CP1W-DA021/CP1W-DA041 CP1W-DA042

Item Voltage Output Current Output Voltage Input Current Input

Analog

output

section

Number of outputs CP1W-DA021: 2 outputs (2 words allocated)

CP1W-DA041: 4 outputs (4 words allocated) 4 outputs (4 words allocated)

Output signal range 1 to 5 VDC, 0 to 10 VDC, or

–10 to 10 VDC 0 to 20 mA or 4 to 20 mA 1 to 5 VDC, 0 to 10 VDC, or

–10 to 10 VDC 0 to 20 mA or 4 to 20 mA

External output allowable

load resistance 2 kΩ min. 350 Ω max. 2 kΩ min. 350 Ω max.

External output impedance 0.5 Ω max. --- 0.5 Ω max. ---

Resolution 1/6000 (full scale) 1/12000 (full scale)

Overall

accuracy

25°C0.4% full scale 0.3% full scale

0 to 55°C0.8% full scale 0.7% full scale

D/A conversion data

16-bit binary (4-digit hexadecimal)

Full scale for –10 to 10 V: F448 to 0BB8 Hex

Full scale for other ranges: 0000 to 1770 Hex

16-bit binary (4-digit hexadecimal)

Full scale for –10 to 10 V: E890 to 1770 Hex

Full scale for other ranges: 0000 to 2EE0 Hex

Conversion time CP1W-DA021: 2 ms/point (4 ms/all points)

CP1W-DA041: 2 ms/point (8 ms/all points) 1 ms/point (4 ms/all points)

Isolation method Photocoupler isolation between analog I/O terminals and internal circuits. No isolation between analog I/O signals.

Current consumption CP1W-DA021: 5 VDC: 40 mA max.; 24 VDC: 95 mA max.

CP1W-DA041: 5 VDC: 80 mA max.; 24 VDC: 124 mA max. 5 VDC: 70 mA max.; 24 VDC: 160 mA max.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Analog I/O Units

●Temperature Sensors Units

*Accuracy for a K-type sensor at -100°C or less is ±4°C ±1 digit max.

The rotary switch is used to set the temperature range.

Model CP1W-MAD42/CP1W-MAD44 CP1W-MAD11

Item Voltage I/O Current I/O Voltage I/O Current I/O

Analog Input

Section

Number of inputs 4 inputs (4 words allocated) 2 inputs (2 words allocated)

Input signal range

0 to 5 VDC, 1 to 5

VDC, 0 to 10 VDC, or

–10 to 10 VDC

0 to 20 mA or 4 to 20

0 to 5 VDC, 1 to 5

VDC,

0 to 10 VDC, or −10

to 10 VDC

0 to 20 mA or 4 to 20

Max. rated input ±15 V ±30 mA ±15 V ±30 mA

External input impedance 1 MΩ min. Approx. 250 Ω1 MΩ min. Approx. 250 Ω

Resolution 1/12000 (full scale) 1/6000 (full scale)

Overall accuracy 25°C0.2% full scale 0.3% full scale 0.3% full scale 0.4% full scale

0 to 55°C0.5% full scale 0.7% full scale 0.6% full scale 0.8% full scale

A/D conversion data

16-bit binary (4-digit hexadecimal)

Full scale for –10 to 10 V: E890 to 1770 hex

Full scale for other ranges: 0000 to 2EE0 hex

16-bit binary (4-digit hexadecimal)

Full scale for −10 to 10 V: F448 to 0BB8 hex

Full scale for other ranges: 0000 to 1770 hex

Averaging function Supported Supported (Settable for individual inputs via

DIP switch)

Open-circuit detection function Supported

Analog Output

Section

Number of outputs CP1W-MAD42: 2 outputs (2 words allocated)

CP1W-MAD44: 4 outputs (4 words allocated) 1 output (1 word allocated)

Output signal range

1 to 5 VDC, 0 to 10

VDC, or

−10 to 10 VDC

0 to 20 mA or 4 to 20

1 to 5 VDC, 0 to 10

VDC, or

−10 to 10 VDC,

0 to 20 mA or 4 to 20

Allowable external output load resistance 2 kΩ min. 350 Ω max. 1 kΩ min. 600 Ω max.

External output impedance 0.5 Ω max. --- 0.5 Ω max. ---

Resolution 1/12000 (full scale) 1/6000 (full scale)

Overall accuracy 25°C0.3% full scale 0.4% full scale

0 to 55°C0.7% full scale 0.8% full scale

Set data (D/A conversion)

16-bit binary (4-digit hexadecimal)

Full scale for −10 to 10 V: E890 to 1770 hex

Full scale for other ranges: 0000 to 2EE0 hex

16-bit binary (4-digit hexadecimal)

Full scale for −10 to 10 V: F448 to 0BB8 hex

Full scale for other ranges: 0000 to 1770 hex

Conversion time CP1W-MAD42: 1 ms/point (6 ms/all points)

CP1W-MAD44: 1 ms/point (8 ms/all points) 2 ms/point (6 ms/all points)

Isolation method Photocoupler isolation between analog I/O terminals and internal circuits.

No isolation between analog I/O signals.

Current consumption

CP1W-MAD42: 5 VDC: 120 mA max., 24

VDC: 120 mA max.

CP1W-MAD44: 5 VDC: 120 mA max., 24

VDC: 170 mA max.

5 VDC: 83 mA max., 24 VDC: 110 mA max.

Item CP1W-TS001 CP1W-TS002 CP1W-TS101 CP1W-TS102

Temperature sensors

Thermocouples Platinum resistance thermometer

Switchable between K and J, but same type must be used for

all inputs.

Switchable between Pt100 and JPt100, but same type must

be used for all inputs.

Number of inputs 2424

Allocated input words 2424

Accuracy (The larger of ±0.5% of converted value or ±2°C) ±1 digit

max. *(The larger of ±0.5% of converted value or ±1°C) ±1 digit

max.

Conversion time 250 ms for 2 or 4 input points

Converted temperature data 16-bit binary data (4-digit hexadecimal)

Isolation Photocouplers between all temperature input signals

Current consumption 5 VDC: 40 mA max., 24 VDC: 59 mA max. 5 VDC: 54 mA max., 24 VDC: 73 mA max.

Setting CP1W-TS001/TS002 CP1W-TS101/TS102

Input type Range (°C) Range (°F) Input type Range (°C) Range (°F)

0K−200 to 1,300 −300 to 2,300 Pt100 −200.0 to 650.0 −300.0 to 1,200.0

1 0.0 to 500.0 0.0 to 900.0 JPt100 −200.0 to 650.0 −300.0 to 1,200.0

2J−100 to 850 −100 to 1,500 ---

Cannot be set.3 0.0 to 400.0 0.0 to 750.0 ---

4 to F --- Cannot be set. ---

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Main Specifications

* 1 Accuracy for a K-type sensor at -100°C or less is ±4°C ±1 digit max.

* 2 Accuracy for a K-type sensor at -100°C or less is ±10°C ±1 digit max.

DIP Switch Settings

The DIP switch is used to set the input type (temperature or analog input), the input thermocouple type (K or J) and the temperature unit (°C or °F).

Note: Set the temperature range according to the type of temperature sensor connected to the Unit. Temperature data will not be converted

correctly if the temperature range does not match the sensor.

Item CP1W-TS003

Temperature sensors Thermocouples or analog input

Switchable between K and J, but same type must be used for all inputs.

Number of inputs Thermocouples inputs :4 , Analog inputs :2

Two analog inputs can be shared with thermocouples inputs.

Accuracy at 25°C

Thermocouple inputs

(The larger of ±0.5% of converted value or ±2°C) ±1 digit max. *1

Analog voltage inputs

0.5% full scale

Analog inputs

0.6% full scale

Accuracy at 0 to

55°C

Thermocouple inputs

(The larger of ±1% of converted value or ±4°C) ±1 digit max. *2

Analog voltage inputs

1.0 % full scale

Analog inputs

1.2 % full scale

Input signal range

Thermocouple inputs

K: -200.0 to 1300.0°C or .300.0 to 2300.0°F

J: -100.0 to 850.0°C or .100.0 to 1500.0°F

Analog voltage inputs

0 to 10V/1 to 5V

Analog inputs

4 to 20mA

Resolution

Thermocouple inputs

0.1°C or 0.1°F

Analog inputs

1/12000 (full scale)

Max. rated input

Analog voltage inputs

±15V

Analog inputs

±30mA

External input

impedance

Analog voltage inputs

1MΩ min.

Analog inputs

Approx. 250Ω

Open-circuit detection function Supported

Averaging function Unsupported

Conversion time 250 ms for 4 input points

Converted temperature data 16-bit binary data (4-digit hexadecimal)

Converted AD data 16-bit binary data (4-digit hexadecimal)

Isolation Photocouplers between any two input signals

Current consumption 5 VDC: 70 mA max., 24 VDC: 30 mA max.

SW Setting

1Thermocouple type of temperature

sensor

ON J

OFF K

2 Temperature unit ON °F

OFF °C

3NC

4Input type selection for the third input

(Input 2)

ON Analog input

OFF Thermocouple

5Input type selection for the fourth

input (Input 3)

ON Analog input

OFF Thermocouple

6 Analog input signal range ON 1 to 5V/4 to 20mA

OFF 0 to 10V

Temperature input

Input type Range (°C) Range (°F)

K -200.0 to 1300.0 -300 to 2300

J -100.0 to 850.0 -100.0 to 1500

1 2 3 4 5 6

OFF

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

●Main Specifications

* 1 Accuracy for a K-type sensor at -100°C or less is ±4°C ±1 digit max.

* 2 Accuracy for a K-type sensor at -100°C or less is ±10°C ±1 digit max.

DIP Switch Settings

The DIP switch is used to set the temperature unit and to set the temperature input range.

Note: Set the temperature range according to the type of temperature sensor connected to the Unit. Temperature data will not be converted

correctly if the temperature range does not match the sensor.

●CompoBus/S I/O Link Unit

Item CP1W-TS004

Temperature sensors Thermocouples

Switchable between K and J, but same type must be used for all inputs.

Number of inputs 12 (2 input words and 1 output word allocated)

Accuracy 25°C(The larger of ±0.5% of converted value or ±2°C) ±1 digit max. *1

0 to 55°C(The larger of ±1% of converted value or ±4°C) ±1 digit max. *2

Conversion time 500 ms for 12 input points

Converted temperature data 16-bit binary data (4-digit hexadecimal)

2-decimal-place mode is not supported

Isolation Photocouplers between any two input signals

Current consumption 5 VDC: 80 mA max., 24 VDC: 50 mA max.

SW Setting

1 Input type ON J

OFF K

2 Temperature unit ON °F

OFF °C

Temperature input

Input type Range (°C) Range (°F)

K -200.0 to 1300.0 -300 to 2300

J -100.0 to 850.0 -100.0 to 1500

Model number CP1W-SRT21

Master/slave CompoBus/S Slave

Number of I/O points 8 input points, 8 output points

Number of words allocated in CPU

Unit I/O memory 1 input word, 1 output word

Node number setting Set using the DIP switch

(Set before turning on the CPU Unit’s power supply.)

1 2

OFF

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Analog Option Board

An analog option board can be added to the CP1E-N/NA@@.

Note: 1. Can be used for the CP1E-N/NA@@ version 1.2 or later.

2. Analog boards can not be used for E@@-type and N@@S(1)-type.

Specifications of Analog Option Board

●CP1W-ADB21 ●CP1W-DAB21V

●CP1W-MAB221

CP1E N30/40/60

or NA20 CPU Unit

CP1W-DAB21V

Analog Output

Option Board

CP1W-MAB221

Analog Input/Output

Option Board

CP1W-ADB21

Analog Input

Option Board

Built-in

RS-232C port

Item Specifications

Voltage Input Current Input

Input signal range 0 to 10 VDC 0 to 20 mA

Max. rated input 0 to 15 VDC 0 to 30 mA

External input impedance

200 kΩ min. Approx. 250 Ω

Resolution 1/4000 (full scale) 1/2000 (full scale)

Overall

accuracy

25°C0.5% full scale 0.6% full scale

0 to 55°C1.0% full scale 1.2% full scale

A/D conversion data 0000 to 0FA0 Hex 0000 to 07D0 Hex

Averaging function None

Isolation method No isolation between analog I/O terminals and

internal circuits.

Current consumption 5 VDC: 20 mA max.

Item Specifications

Voltage Output Current Output

Output signal range 0 to 10 VDC ---

External output allowable

load resistance

2 kΩ min. ---

External output impedance

0.5 Ω max. ---

Resolution 1/4000 (full scale) ---

Overall

accuracy

25°C0.5% full scale ---

0 to 55°C1.0% full scale ---

Set data (D/A conversion)

0000 to 0FA0 Hex ---

Isolation method No isolation between analog I/O terminals and

internal circuits.

Current consumption 5 VDC: 60 mA max.

Item Specifications

Voltage I/O Current I/O

Analog Input Section

Input signal range 0 to 10 VDC 0 to 20 mA

Max. rated input 0 to 15 VDC 0 to 30 mA

External input impedance

200 kΩ min. Approx. 250 Ω

Resolution 1/4000 (full scale) 1/2000 (full scale)

Overall

accuracy

25°C0.5% full scale 0.6% full scale

0 to 55°C1.0% full scale 1.2% full scale

A/D conversion data 0000 to 0FA0 Hex 0000 to 07D0 Hex

Averaging function None

Analog Output Section

Output signal range 0 to 10 VDC ---

External output allowable

load resistance

2 kΩ min. ---

External output impedance

0.5 Ω max. ---

Resolution 1/4000 (full scale) ---

Overall

accuracy

25°C0.5% full scale ---

0 to 55°C1.0% full scale ---

Set data (D/A conversion)

0000 to 0FA0 Hex ---

Isolation method No isolation between analog I/O terminals and internal circuits.

Current consumption 5 VDC: 80 mA max.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Analog Option Board Refresh Time

Analog Opiton Board Cycle time (ms)

1 ms 10 ms 20 ms

CP1W-ADB21 40 ±30% 50 ±30% 80 ±30%

CP1W-DAB21V 30 ±40% 40 ±50% 70 ±40%

CP1W-MAB221(AD) 60 ±40% 80 ±60% 100 ±50%

CP1W-MAB221(DA) 40 ±80% 60 ±60% 90 ±50%

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

External Interfaces

The CP1E CPU Units provide the following external interfaces.

E14/20S CPU Units

Note: Terminal Block (Fixed)

E30/40/60S CPU Units N30/40/60S(1) CPU Units

E@@S-type N@@S(1)-type

* N@@S1-type only.

E10/14/20 CPU Units N14/20 CPU Units

E@@-type N@@-type

E30/40 CPU Units N30/40/60 or NA20 CPU Units

E@@-type N@@-type/NA-type

Output terminal

block

Input terminals

Ground terminal

Output indicators

Power supply input terminals

Output terminals

Input indicators

Peripheral

USB port

Operation indicators

Input terminal block

Output

terminal

block

Ground

terminal

Output

indicators

Expansion

I/O Unit

connector

Output terminals

External power supply

Input terminal

block

Input

indicators

Peripheral

USB port

Operation

indicators

Power supply input terminals Input terminals

Built-in RS-232C

communications

status indicator

Built-in RS-485

communications

status indicator *

Built-in RS-232C

port

Built-in RS-485 port

Battery

cover

Input terminal block

Output terminal

block

Power supply input terminals

Input terminals

Output terminals

Ground terminal

Input indicators

Output indicators

Peripheral

USB port

Analog

adjusters

Operation indicators

Battery

cover

Built-in

RS-232C port

Built-in RS-232C

communications

status indicator

Input terminal

block

Output

terminal

block

Power supply

input terminals Input terminals

Output terminals

External power supply

Ground

terminal

Input

indicators

Output

indicators

Peripheral

USB port

Analog

adjusters

Operation

indicators

Expansion

I/O Unit

connector

Serial Option Board slot

Built-in RS-232C communications

status indicator

Battery

cover

Built-in RS-232C port

Analog input

terminal

(NA-type only)

Analog output

terminals

(NA-type only)

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Serial Communications Port for N/NA@@(S@)-type CPU Units

The Serial Communication Port can be used for a CP1E N/NA@@(S@)-type CPU Unit.

N30/40/60 or NA20 CPU Units

One built-in RS-232C port and one Option Board can be used.

Note: Option Boards cannot be used for CP1E N14/20 CPU Units.

N30/40/60S1 CPU Units N30/40/60S CPU Units

Built-in RS-232C, RS-485 ports. Built-in RS-232C port.

N14/20 CPU Units

Built-in RS-232C ports.

Built-in

RS-232C

Built-in RS-2485

Built-in

RS-232C

CP1W-CIF11/12

RS-422A/485 Option

Board

CP1W-CIF01

RS-232C Option

Board

Built-in

RS-232C port

CP1W-CIF41

Ethernet Option

Board version 2.0 or higher

IP ADDRESS:

SUBNET MASK:

COMMERR 10BASE-T

100BASE-TX

Optional Serial Communication Board

Note: The Optional Serial Communication Board cannot be used for CP1E

N/NA@@S(1)-type CPU Units and E@@-type CPU Units.

Model number Port

Maximum

transmission

distance

Connection method

CP1W-CIF01 One RS-232C port 15 m Connector

(D-sub, 9 pin female)

CP1W-CIF11 One RS-422A/485 port

(not isolated) 50 m Terminal block

(using ferrules)

CP1W-CIF12 One RS-422A/485 port

(isolated) 500 m Terminal block

(using ferrules)

CP1W-CIF41 One Ethernet port 100 m Connector

(RJ45, 8 pin modular)

Built-in

RS-232C port

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Built-in RS-232C Port and CP1W-CIF01 RS-232C Option Board

Built-in RS-232C Port (2-wire sensors) (N@@S1-type only)

CP1W-CIF11/CIF12 RS-422A/485 Option Board

COMM

Front Back

Communications Status Indicator

RS-232 Connector CPU Unit Connector

Abbreviation for signal name

Signal name Signal direction

N@@-type

built-in

RS-232C port /

CP1W-CIF01

N@@S(1)-type

Buit-in

RS-232C port

1 FG Frame ground --

2 SD (TXD) Send data Output

3 RD (RXD) Receive data Input

4RS (RTS) Request to send Output

5 CS (CTS) Clear to send Input

6 5 V Power supply --

7 DR (DSR) NC *Data set ready Input

8 ER (DTR) NC *Data terminal ready Output

9 SG (0 V) Signal ground --

Connector

hood FG Frame Ground --

*Built-in RS-232C port of N@@S(1)-type does not support DR/ER.

CJ1W-CIF11 cannot be used for the built-in RS-232C port of N@@S(1)-type.

●RS-232C Connector

●DIP Switch for Terminating Resistance Settings

Settings

ON ON (both ends) Terminating resistance selection

Resistance: Approx. 220Ω

OFF OFF

●RS-485 Terminal Block

DIP Switch

COMM

Front Back

Communications Status Indicator

DIP Switch for

Operation Settings

RS-422A/485 Connector

RDA- RDB+ SDA- SDB+ FG

CPU Unit

Connector

●RS-422A/485 Terminal Block

RDB+

RDA-

SDA- SDB+

Tighten the terminal block screws

to a torque of 0.28 N·m.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

CP1W-CIF41 Ethernet Option Board version 2.0 or higher

●Specifications ●FINS Communications Service Specifications

Connecting to Support Software

Operating Environment and System Configuration

The following system is required to operate the CX-Programmer. Make sure your system provides the following conditions and has the necessary components.

Connecting Methods

Using commercially available USB cable, connect the CX-Programmer to the peripheral USB port on the CPU Unit.

Host link connection can be made with RS-232C port to connect the Programming Device (CX-Programmer).

IP ADDRESS:

SUBNET MASK:

COMM ERR 10BASE-T

100BASE-TX

Front Rear

Label

Attach the label here to show

IP address and subnet mask.

Ethernet Connector

Used to connect the Ethernet

twisted-pair cable.

LED Indicators

Display the operating status of

the Option Board.

CPU Unit connector

Type 100/10Base-TX (Auto-MDIX)

Support Software CX-Programmer version 9.12 or higher

Transfer

Media access method

CSMA/CD

Modulation method Baseband

Transmission paths

Star form

Baud rate

100 Mbit/s

(100Base-TX)

10 Mbit/s

(10Base-TX)

•Half/full auto-negotiation for each port

•Link speed auto-sensing for each port

Transmission

media

•Unshielded

twisted-pair

(UDP) cable

Categories: 5, 5e

•Shielded twisted-

pair (STP) cable

Categories:

100Ω at 5, 5e

•Unshielded

twisted-pair

(UDP) cable

Categories: 3, 4, 5, 5e

•

Shielded twisted-

pair (STP) cable

Categories:

100

at 3, 4, 5, 5e

Transmission Distance

100 m (distance between hub and node)

Number of cascade

connections No restrictions if switching hubs are used.

Number of nodes 254

Message Length 552 bytes max.

Date Length

540 bytes max.

(except for FINS header 10 byte and Command

header 2 byte.)

Number of buffer 8k byte

Protocol name FINS/UDP method FINS/TCP method

Protocol used

UDP/IP TCP/IP

The selection of UDP/IP or TCP/IP is

made from the FINS/TCP Tab by the Web

browser function.

Server/Client Only server (Cannot be used as a client)

Number of connections --- 2

Port number 9600 (default)

Can be changed.

9600 (default)

Can be changed.

Protection No

Yes (Specification

of client IP

addresses when

unit is used as a

server)

Item Description

Supported computer IBM PC/AT or equivalent

CD-ROM or DVD-ROM drive One or more

Supported Operating Systems Windows 2000 (Service Pack 4 or higher), XP, Vista, or 7

(except 64-bit edition)

CPU Pentium II 333 MHz or faster

RAM 256 MB min. 512 MB or more recommended

Available hard disk space 600 MB min.

Display 800 x 600 SVGA min.

PLC and connection port USB port, RS-232C port, RS-422A/485 port or Ethernet port

USB port

A connector

Commercially available

USB cable

Peripheral USB port

(Conforming to USB 2.0, B connector)

B connector

CP1E CPU Unit

CX-Programmer

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Connecting Cable

Use the following cable to connect the CP1E CPU Unit to the computer running the Support Software.

USB port

RS-232C Port for N/NA@@(S@)-type CPU Units

Note: Connectable with CX-Programmer Ver.9.1 or higher only.

*Use the USB-Serial Conversion Cable CS1W-CIF31 together to connect a PLC to a personal computer's USB port.

Port at Unit Port at computer Network type

(communications mode) Model numbers Length

Peripheral USB port

(Conforming to USB 2.0, B connector) USB port USB 2.0 (or 1.1) Commercially available USB cable

(A connector - B connector) Less than 5 m

Port at Unit Port at computer Communications mode Connecting Cable

Model Length Remarks

RS-232C Port or

CP1W-CIF01

(Add this to the option board slot.)

RS-232C port *Host Link

(SYSWAY)

XW2Z-200S-CV 2m With anti-static

connectors

XW2Z-500S-CV 5m With anti-static

connectors

XW2Z-200S-V 2m ---

XW2Z-500S-V 5m ---

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Programming Instructions

Sequence Input Instructions

Sequence Output Instructions

Timer and Counter Instructions

Comparison Instructions

Data Movement Instructions

Instruction Mnemonic

LOAD LD

LOAD NOT LD NOT

AND AND

AND NOT AND NOT

OR OR

OR NOT OR NOT

AND LOAD AND LD

OR LOAD OR LD

NOT NOT

CONDITION ON UP

CONDITION OFF DOWN

Instruction Mnemonic

OUTPUT OUT

OUTPUT NOT OUT NOT

KEEP KEEP

DIFFERENTIATE UP DIFU

DIFFERENTIATE DOWN DIFD

SET SET

RESET RSET

MULTIPLE BIT SET SETA

MULTIPLE BIT RESET RSTA

SINGLE BIT SET SETB

SINGLE BIT RESET RSTB

Instruction Mnemonic

END END

NO OPERATION NOP

INTERLOCK IL

INTERLOCK CLEAR ILC

MULTI-INTERLOCK

DIFFERENTIATION HOLD MILH

MULTI-INTERLOCK

DIFFERENTIATION RELEASE MILR

MULTI-INTERLOCK CLEAR MILC

JUMP JMP

JUMP END JME

CONDITIONAL JUMP CJP

FOR LOOP FOR

BREAK LOOP BREAK

NEXT LOOP NEXT

Instruction Mnemonic

TIMER TIM

TIMX

COUNTER CNT

CNTX

HIGH-SPEED TIMER TIMH

TIMHX

ONE-MS TIMER TMHH

TMHHX

ACCUMULATIVE TIMER TTIM

TTIMX

LONG TIMER TIML

TIMLX

REVERSIBLE COUNTER CNTR

CNTRX

RESET TIMER/COUNTER CNR

CNRX

Instruction Mnemonic

Input Comparison Instructions

(unsigned)

LD,AND,OR+=

LD,AND,OR+<>

LD,AND,OR+<

LD,AND,OR+<=

LD,AND,OR+>

LD,AND,OR+>=

Input Comparison Instructions

(double, unsigned)

LD,AND,OR+=+L

LD,AND,OR+<>+L

LD,AND,OR+<+L

LD,AND,OR+<=+L

LD,AND,OR+>+L

LD,AND,OR+>=+L

Input Comparison Instructions

(signed)

LD,AND,OR+=+S

LD,AND,OR+<>+S

LD,AND,OR+<+S

LD,AND,OR+<=+S

LD,AND,OR+>+S

LD,AND,OR+>=+S

Input Comparison Instructions

(double, signed)

LD,AND,OR+=+SL

LD,AND,OR+<>+SL

LD,AND,OR+<+SL

LD,AND,OR+<=+SL

LD,AND,OR+>+SL

LD,AND,OR+>=+SL

Time Comparison Instructions

=DT

<>DT

<DT

<=DT

>DT

>=DT

COMPARE CMP

DOUBLE COMPARE CMPL

SIGNED BINARY COMPARE CPS

DOUBLE SIGNED BINARY

COMPARE CPSL

TABLE COMPARE TCMP

UNSIGNED BLOCK COMPARE BCMP

AREA RANGE COMPARE ZCP

DOUBLE AREA RANGE COMPARE ZCPL

Instruction Mnemonic

MOVE MOV

DOUBLE MOVE MOVL

MOVE NOT MVN

MOVE BIT MOVB

MOVE DIGIT MOVD

MULTIPLE BIT TRANSFER XFRB

BLOCK TRANSFER XFER

BLOCK SET BSET

DATA EXCHANGE XCHG

SINGLE WORD DISTRIBUTE DIST

DATA COLLECT COLL

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Data Shift Instructions

Increment/Decrement Instructions

Symbol Math Instructions

Conversion Instructions

Logic Instructions

Special Math Instructions

Floating-point Math Instructions

Table Data Processing Instructions

Data Control Instructions

Instruction Mnemonic

SHIFT REGISTER SFT

REVERSIBLE SHIFT REGISTER SFTR

WORD SHIFT WSFT

ARITHMETIC SHIFT LEFT ASL

ARITHMETIC SHIFT RIGHT ASR

ROTATE LEFT ROL

ROTATE RIGHT ROR

ONE DIGIT SHIFT LEFT SLD

ONE DIGIT SHIFT RIGHT SRD

SHIFT N-BITS LEFT NASL

DOUBLE SHIFT N-BITS LEFT NSLL

SHIFT N-BITS RIGHT NASR

DOUBLE SHIFT N-BITS RIGHT NSRL

Instruction Mnemonic

INCREMENT BINARY ++

DOUBLE INCREMENT BINARY ++L

DECREMENT BINARY --

DOUBLE DECREMENT BINARY --L

INCREMENT BCD ++B

DOUBLE INCREMENT BCD ++BL

DECREMENT BCD --B

DOUBLE DECREMENT BCD --BL

Instruction Mnemonic

SIGNED BINARY ADD WITHOUT

CARRY +

DOUBLE SIGNED BINARY ADD

WITHOUT CARRY +L

SIGNED BINARY ADD WITH CARRY

DOUBLE SIGNED BINARY ADD

WITH CARRY +CL

BCD ADD WITHOUT CARRY +B

DOUBLE BCD ADD WITHOUT CARRY

+BL

BCD ADD WITH CARRY +BC

DOUBLE BCD ADD WITH CARRY +BCL

SIGNED BINARY SUBTRACT

WITHOUT CARRY -

DOUBLE SIGNED BINARY

SUBTRACT WITHOUT CARRY -L

SIGNED BINARY SUBTRACT WITH

CARRY -C

DOUBLE SIGNED BINARY

SUBTRACT WITH CARRY -CL

BCD SUBTRACT WITHOUT CARRY -B

DOUBLE BCD SUBTRACT

WITHOUT CARRY -BL

BCD SUBTRACT WITH CARRY -BC

DOUBLE BCD SUBTRACT WITH

CARRY -BCL

SIGNED BINARY MULTIPLY *

DOUBLE SIGNED BINARY MULTIPLY

BCD MULTIPLY *B

DOUBLE BCD MULTIPLY *BL

SIGNED BINARY DIVIDE /

DOUBLE SIGNED BINARY DIVIDE /L

BCD DIVIDE /B

DOUBLE BCD DIVIDE /BL

Instruction Mnemonic

BCD-TO-BINARY BIN

DOUBLE BCD-TO-DOUBLE

BINARY BINL

BINARY-TO-BCD BCD

DOUBLE BINARY-TO-DOUBLE BCD

BCDL

2’S COMPLEMENT NEG

DATA DECODER MLPX

DATA ENCODER DMPX

ASCII CONVERT ASC

ASCII TO HEX HEX

Instruction Mnemonic

LOGICAL AND ANDW

DOUBLE LOGICAL AND ANDL

LOGICAL OR ORW

DOUBLE LOGICAL OR ORWL

EXCLUSIVE OR XORW

DOUBLE EXCLUSIVE OR XORL

COMPLEMENT COM

DOUBLE COMPLEMENT COML

Instruction Mnemonic

ARITHMETIC PROCESS APR

BIT COUNTER BCNT

Instruction Mnemonic

FLOATING TO 16-BIT FIX

FLOATING TO 32-BIT FIXL

16-BIT TO FLOATING FLT

32-BIT TO FLOATING FLTL

FLOATING-POINT ADD +F

FLOATING-POINT SUBTRACT -F

FLOATING-POINT DIVIDE /F

FLOATING-POINT MULTIPLY *F

Floating Symbol Comparison

LD, AND, OR+=F

LD, AND, OR+<>F

LD, AND, OR+<F

LD, AND, OR+<=F

LD, AND, OR+>F

LD, AND, OR+>=F

FLOATING- POINT TO ASCII FSTR

ASCII TO FLOATING-POINT FVAL

Instruction Mnemonic

SWAP BYTES SWAP

FRAME CHECKSUM FCS

Instruction Mnemonic

PID CONTROL WITH AUTOTUNING PIDAT

TIME-PROPORTIONAL OUTPUT TPO

SCALING SCL

SCALING 2 SCL2

SCALING 3 SCL3

AVERAGE AVG

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Subroutine Instructions

Interrupt Control Instructions

High-speed Counter and Pulse Output

Instructions

Step Instructions

I/O Unit Instructions

Serial Communications Instructions

Clock Instructions

Failure Diagnosis Instructions

Other Instructions

Instruction Mnemonic

SUBROUTINE CALL SBS

SUBROUTINE ENTRY SBN

SUBROUTINE RETURN RET

Instruction Mnemonic

SET INTERRUPT MASK MSKS

CLEAR INTERRUPT CLI

DISABLE INTERRUPTS DI

ENABLE INTERRUPTS EI

Instruction Mnemonic

MODE CONTROL INI

HIGH-SPEED COUNTER PV READ PRV

COMPARISON TABLE LOAD CTBL

SPEED OUTPUT SPED

SET PULSES PULS

PULSE OUTPUT PLS2

ACCELERATION CONTROL ACC

ORIGIN SEARCH ORG

PULSE WITH VARIABLE DUTY

FACTOR PWM

Instruction Mnemonic

STEP DEFINE STEP

STEP START SNXT

Instruction Mnemonic

I/O REFRESH IORF

7-SEGMENT DECODER SDEC

DIGITAL SWITCH INPUT DSW

MATRIX INPUT MTR

7-SEGMENT DISPLAY OUTPUT 7SEG

Instruction Mnemonic

TRANSMIT TXD

RECEIVE RXD

Instruction Mnemonic

CALENDAR ADD CADD

CALENDAR SUBTRACT CSUB

CLOCK ADJUSTMENT DATE

Instruction Mnemonic

FAILURE ALARM FAL

SEVERE FAILURE ALARM FALS

Instruction Mnemonic

SET CARRY STC

CLEAR CARRY CLC

EXTEND MAXIMUM CYCLE TIME WDT

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Dimensions (Unit: mm)

CP1E CPU Unit

●CPU Units with 10 I/O Points

●CPU Units with 14 or 20 I/O Points

CP1E-@14/20D@@-@

CP1E-@14/20SD@@-@

●CPU Units with 30 I/O Points

CPU Units with 20 I/O Points and Built-in Analog

CP1E-@30D@@-@, CP1E-NA20D@-@

110 100 90

Two, 4.5 dia.

90100

110

Two, 4.5 dia.

90100

110

78.6

Two, 4.5 dia.

90100

130

120

110

Four, 4.5 dia.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

CP1E-@30S(1)D@@-@

●CPU Units with 40 I/O Points

CP1E-@40D@@-@

CP1E-@40S(1)D@@-@

●CPU Units with 60 I/O Points

CP1E-N60D@-@

78.6

90100

130

120

110

Four, 4.5 dia.

90100

Four, 4.5 dia.

150

140

110

78.6

90100

150

140

110

Four, 4.5 dia.

110 100 90

185

195

Four, 4.5 dia.

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

CP1E-@60S(1)D@@-@

Expansion I/O Units and Expansion Units

●CP1W-8E@@/CP1W-SRT21

●CP1W-20ED@/CP1W-16E@@/CP1W-AD04@/CP1W-DA021/CP1W-DA04@/CP1W-MAD@@/

CP1W-TS@@1/@@2/@@3

●CP1W-40ED@/CP1W-32E@@/CP1W-TS004

78.6

90100

195

185

110

Four, 4.5 dia.

56±0.2

100±0.2

Two, 4.5 dia.

76±0.2

100±0.2

Two, 4.5 dia.

Four, 4.5 dia.

90100110

140

150

CP1E-E@@(S)D@-@ CP1E-N@@(S@)D@-@/NA20D@-@

Related Manuals

]

Manual name Cat. No. Model numbers Application Contents

SYSMAC CP Series CP1E

CPU Unit Hardware Manual W479

CP1E-E@@SD@-@

CP1E-N@@S@D@-@

CP1E-E@@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

To learn the hardware specifications of the

CP1E PLCs

Describes the following information for

CP1E PLCs.

•Overview and features

•Basic system configuration

•Part names and functions

•Installation and settings

•Troubleshooting

Use this manual together with the CP1E CPU Unit Software Manual (Cat. No. W480) and

CP1E CPU Unit Instructions Reference Manual (Cat. No. W483).

SYSMAC CP Series CP1E

CPU Unit Software Manual W480

CP1E-E@@SD@-@

CP1E-N@@S@D@-@

CP1E-E@@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

To learn the software specifications of the

CP1E

Describes the following information for

CP1E PLCs.

•CPU Unit operation

•Internal memory

•Programming

•Settings

•CPU Unit built-in functions

•Interrupts

•High-speed counter inputs

•Pulse outputs

•Serial communications

•Analog I/O function

•Other functions

Use this manual together with the CP1E CPU Unit Hardware Manual (Cat. No. W479)

and CP1E CPU Unit Instructions Reference Manual (Cat. No. W483).

SYSMAC CP Series CP1E

CPU Unit Instructions

Reference Manual

W483

CP1E-E@@SD@-@

CP1E-N@@S@D@-@

CP1E-E@@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

To learn programming instructions in detail

Describes each programming instruction in

detail.

When programming, use this manual

together with the CP1E CPU Unit

Hardware Manual (Cat. No. W479) and

CP1E CPU Unit Software Manual (Cat. No.

W480).

CS/CJ/CP/NSJ Series

Communications Commands

Reference Manual

W342

CS1G/H-CPU@@H

CS1G/H-CPU@@-V1

CS1D-CPU@@H

CS1D-CPU@@S

CS1W-SCU@@-V1

CS1W-SCB@@-V1

CJ1G/H-CPU@@H

CJ1G-CPU@@P

CJ1M-CPU@@

CJ1G-CPU@@

CJ1W-SCU@@-V1

To learn communications commands for

CS/CJ/CP/NSJ-series Controllers in detail

Describes 1) C-mode commands and 2)

FINS commands in detail.

Read this manual for details on C-mode

and FINS commands addressed to CPU

Units.

Note: This manual describes commands addressed to CPU Units. It does not cover

commands addressed to other Units or ports (e.g., serial communications ports

on CPU Units, communications ports on Serial Communications Units/Boards,

and other Communications Units).

SYSMAC CP Series

CP1L/CP1E CPU Unit

Introduction Manual

W461

CP1L-L10D@-@

CP1L-L14D@-@

CP1L-L20D@-@

CP1L-M30D@-@

CP1L-M40D@-@

CP1L-M60D@-@

CP1E-E@@D@-@

CP1E-N@@D@-@

CP1E-NA@@D@-@

To learn the basic setup methods of the

CP1L/CP1E PLCs

Describes the following information for

CP1L/CP1E PLCs.

•Basic configuration and component

names

•Mounting and wiring

•Programming, data transfer, and

debugging using the CX-Programmer

•Application program examples

Terms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have

any questions or comments.

Warranties.

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of twelve months from the date of sale by Omron (or such other period expressed in writing

by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE

PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL

SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products

or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,

to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the

non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price

of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other

claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,

installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or

unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system

assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in

writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is

not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,

or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with

respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it

to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice

to change part numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be

assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to

confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

Authorized Distributor:

In the interest of product improvement,

specifications are subject to change without notice.

Cat. No. P061-E1-09 1214 (0309)

OMRON Corporation Industrial Automation Company

OMRON ELECTRONICS LLC

One Commerce Drive Schaumburg,

IL 60173-5302 U.S.A.

Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69-2132 JD Hoofddorp

The Netherlands

Tel: (31)2356-81-300/Fax: (31)2356-81-388

Contact: www.ia.omron.com

Tokyo, JAPAN

OMRON ASIA PACIFIC PTE. LTD.

No. 438A Alexandra Road # 05-05/08 (Lobby 2),

Alexandra Technopark,

Singapore 119967

Tel: (65) 6835-3011/Fax: (65) 6835-2711

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Zhong Road,

PuDong New Area, Shanghai, 200120, China

Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Note: Do not use this document to operate the Unit.

CSM_16_4_0417