IRF9640S, SiHF9640S, IRF9640L, SiHF9640L Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) * Halogen-free According to IEC 61249-2-21 Definition * Surface Mount * Available in Tape and Reel * Dynamic dV/dt Rating * Repetitive Avalanche Rated * P-Channel * Fast Switching * Ease of Paralleling * Compliant to RoHS Directive 2002/95/EC - 200 RDS(on) () VGS = - 10 V 0.50 Qg (Max.) (nC) 44 Qgs (nC) 7.1 Qgd (nC) 27 Configuration Single S DESCRIPTION D2PAK (TO-263) I2PAK (TO-262) Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The D2PAK (TO-263) is a surface mount power package. It provides the highest power capability and the lowest possible on-resistance in any existing surface mount package. The D2PAK (TO-263) is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0 W in a typical surface mount application. The through-hole version (IRF9640L, SiHF9640L) is available for low-profile applications. G G G D S D S D P-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free and Halogen-free Lead (Pb)-free D2PAK (TO-263) SiHF9640S-GE3 IRF9640SPbF SiHF9640S-E3 D2PAK (TO-263) IRF9640STRLPbFa SiHF9640STL-E3a D2PAK (TO-263) IRF9640STRRPbFa SiHF9640STR-E3a I2PAK (TO-262) SiHF9640L-GE3 IRF9640LPbF SiHF9640L-E3 Note a. See device orientation. ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT VDS VGS - 200 20 - 11 - 6.8 - 44 1.0 0.025 700 - 11 13 125 3.0 - 5.0 - 55 to + 150 300d Drain-Source Voltage Gate-Source Voltage Continuous Drain Current VGS at - 10 V TC = 25 C TC = 100 C Currenta Pulsed Drain Linear Derating Factor Linear Derating Factor (PCB Mount)e Single Pulse Avalanche Energyb Avalanche Currenta Repetiitive Avalanche Energya Maximum Power Dissipation Maximum Power Dissipation (PCB Mount)e Peak Diode Recovery dV/dtc Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) ID IDM EAS IAR EAR TC = 25 C TA = 25 C PD dV/dt TJ, Tstg for 10 s UNIT V A W/C mJ A mJ W V/ns C Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = - 50 V, starting TJ = 25 C, L = 8.7 mH, Rg = 25 , IAS = - 11 A (see fig. 12). c. ISD - 11 A, dI/dt 150 A/s, VDD VDS, TJ 150 C. d. 1.6 mm from case. e. When mounted on 1" square PCB (FR-4 or G-10 material). * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 91087 S11-1052-Rev. D, 30-May-11 www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9640S, SiHF9640S, IRF9640L, SiHF9640L Vishay Siliconix THERMAL RESISTANCE RATINGS SYMBOL TYP. MAX. Maximum Junction-to-Ambient PARAMETER RthJA - 62 Maximum Junction-to-Ambient (PCB Mount)a RthJA - 40 Maximum Junction-to-Case (Drain) RthJC - 1.0 UNIT C/W Note a. When mounted on 1" square PCB (FR-4 or G-10 material). SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = - 250 A - 200 - - V VDS/TJ Reference to 25 C, ID = - 1 mA - - 0.20 - V/C VGS(th) VDS = VGS, ID = - 250 A - 2.0 - - 4.0 V nA Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current Drain-Source On-State Resistance Forward Transconductance IGSS IDSS RDS(on) gfs VGS = 20 V - - 100 VDS = - 200 V, VGS = 0 V - - - 100 VDS = - 160 V, VGS = 0 V, TJ = 125 C - - - 500 - - 0.50 4.1 - - S - 1200 - ID = 6.6 Ab VGS = - 10 V VDS = - 50 V, ID = - 6.6 Ab A Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs VGS = 0 V, VDS = - 25 V, f = 1.0 MHz, see fig. 5 VGS = - 10 V ID = - 11 A, VDS = - 160 V, see fig. 6 and 13b - 370 - - 81 - - - 44 - - 7.1 pF nC Gate-Drain Charge Qgd - - 27 Turn-On Delay Time td(on) - 14 - - 43 - - 39 - - 38 - - 4.5 - - 7.5 - - - - 11 - - - 44 - - - 5.0 V - 250 300 ns - 2.9 3.6 C Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance tr td(off) VDD = - 100 V, ID = - 11 A, Rg = 9.1 , RD = 8.6 , see fig. 10b tf LD LS Between lead, 6 mm (0.25") from package and center of die contact ns D nH G S Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulsed Diode Forward Currenta Body Diode Voltage IS ISM VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Forward Turn-On Time ton MOSFET symbol showing the integral reverse p - n junction diode D A G TJ = 25 C, IS = -11 A, VGS = 0 S Vb TJ = 25 C, IF = - 11 A, dI/dt = 100 A/sb Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width 300 s; duty cycle 2 %. www.vishay.com 2 Document Number: 91087 S11-1052-Rev. D, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9640S, SiHF9640S, IRF9640L, SiHF9640L Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) VGS - 15 V - 10 V - 8.0 V - 7.0 V - 6.0 V - 5.5 V - 5.0 V Bottom - 4.5 V 101 - 4.5 V - ID, Drain Current (A) - ID, Drain Current (A) Top 100 20 s Pulse Width VDS = - 50 V 20 s Pulse Width TC = 25 C 100 100 101 4 - VDS, Drain-to-Source Voltage (V) 91087_01 - ID, Drain Current (A) - 4.5 V 100 91087_02 20 s Pulse Width TC = 150 C 100 101 - VDS, Drain-to-Source Voltage (V) Fig. 2 - Typical Output Characteristics, TC = 150 C Document Number: 91087 S11-1052-Rev. D, 30-May-11 6 7 8 9 10 Fig. 3 - Typical Transfer Characteristics RDS(on), Drain-to-Source On Resistance (Normalized) VGS - 15 V - 10 V - 8.0 V - 7.0 V - 6.0 V - 5.5 V - 5.0 V Bottom - 4.5 V Top 5 - VGS, Gate-to-Source Voltage (V) 91087_03 Fig. 1 - Typical Output Characteristics, TC = 25 C 101 150 C 25 C 101 91087_04 3.0 2.5 ID = - 11 A VGS = - 10 V 2.0 1.5 1.0 0.5 0.0 - 60 - 40 - 20 0 20 40 60 80 100 120 140 160 TJ, Junction Temperature (C) Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9640S, SiHF9640S, IRF9640L, SiHF9640L 2400 VGS = 0 V, f = 1 MHz Ciss = Cgs + Cgd, Cds Shorted Crss = Cgd Coss = Cds + Cgd Capacitance (pF) 2000 1600 Ciss 1200 800 Coss 400 Crss - ISD, Reverse Drain Current (A) Vishay Siliconix 101 100 0 100 0.0 - ID, Drain Current (A) - VGS, Gate-to-Source Voltage (V) Operation in this area limited by RDS(on) 5 VDS = - 160 V VDS = - 40 V 12 8 4 0 91087_06 10 20 30 40 50 100 s 10 1 ms 5 TC = 25 C TJ = 150 C Single Pulse QG, Total Gate Charge (nC) Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage www.vishay.com 4 1 1 60 91087_08 10 s 2 2 For test circuit see figure 13 0 5.0 4.0 - VSD, Source-to-Drain Voltage (V) 102 VDS = - 100 V 3.0 Fig. 7 - Typical Source-Drain Diode Forward Voltage ID = - 11 A 16 2.0 1.0 91087_07 Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage 20 VGS = 0 V 10-1 101 - VDS, Drain-to-Source Voltage (V) 91087_05 25 C 150 C 2 5 10 2 5 10 ms 102 2 5 103 - VDS, Drain-to-Source Voltage (V) Fig. 8 - Maximum Safe Operating Area Document Number: 91087 S11-1052-Rev. D, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9640S, SiHF9640S, IRF9640L, SiHF9640L Vishay Siliconix RD VDS 12 VGS - ID, Drain Current (A) D.U.T. Rg 10 8 +VDD - 10 V Pulse width 1 s Duty factor 0.1 % 6 Fig. 10a - Switching Time Test Circuit 4 2 td(on) td(off) tf tr VGS 10 % 0 25 50 100 75 125 150 TC, Case Temperature (C) 91087_09 90 % VDS Fig. 10b - Switching Time Waveforms Fig. 9 - Maximum Drain Current vs. Case Temperature Thermal Response (ZthJC) 10 1 D = 0.50 PDM 0.20 0.1 0.10 0.05 t1 t2 Single Pulse (Thermal Response) 0.02 0.01 Notes: 1. Duty Factor, D = t1/t2 2. Peak Tj = PDM x ZthJC + TC 10-2 10-5 10-4 10-3 10-2 0.1 1 10 t1, Rectangular Pulse Duration (s) 91087_11 Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case L Vary tp to obtain required IAS IAS VDS D.U.T Rg VDS + V DD VDD IAS tp - 10 V tp 0.01 VDS Fig. 12a - Unclamped Inductive Test Circuit Document Number: 91087 S11-1052-Rev. D, 30-May-11 Fig. 12b - Unclamped Inductive Waveforms www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9640S, SiHF9640S, IRF9640L, SiHF9640L Vishay Siliconix EAS, Single Pulse Energy (mJ) 1600 ID - 4.9 A - 7.0 A Bottom - 11 A Top 1200 800 400 0 VDD = - 50 V 25 91087_12c 50 75 100 125 150 Starting TJ, Junction Temperature (C) Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 k QG - 10 V 12 V 0.2 F 0.3 F QGS - QGD D.U.T. VG + VDS VGS - 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig. 13b - Gate Charge Test Circuit Document Number: 91087 S11-1052-Rev. D, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9640S, SiHF9640S, IRF9640L, SiHF9640L Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit D.U.T. + Circuit layout considerations * Low stray inductance * Ground plane * Low leakage inductance current transformer + + - - Rg * dV/dt controlled by Rg * ISD controlled by duty factor "D" * D.U.T. - device under test + - VDD Note * Compliment N-Channel of D.U.T. for driver Driver gate drive P.W. Period D= P.W. Period VGS = - 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple 5 % ISD Note a. VGS = - 5 V for logic level and - 3 V drive devices Fig. 14 - For P-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91087. Document Number: 91087 S11-1052-Rev. D, 30-May-11 www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix TO-263AB (HIGH VOLTAGE) A (Datum A) 3 A 4 4 L1 B A E c2 H Gauge plane 4 0 to 8 5 D B Detail A Seating plane H 1 2 C 3 C L L3 L4 Detail "A" Rotated 90 CW scale 8:1 L2 B A1 B A 2 x b2 c 2xb E 0.010 M A M B 0.004 M B 2xe Plating 5 b1, b3 Base metal c1 (c) D1 4 5 (b, b2) Lead tip MILLIMETERS DIM. MIN. MAX. View A - A INCHES MIN. 4 E1 Section B - B and C - C Scale: none MILLIMETERS MAX. DIM. MIN. INCHES MAX. MIN. MAX. A 4.06 4.83 0.160 0.190 D1 6.86 - 0.270 - A1 0.00 0.25 0.000 0.010 E 9.65 10.67 0.380 0.420 6.22 - 0.245 - b 0.51 0.99 0.020 0.039 E1 b1 0.51 0.89 0.020 0.035 e b2 1.14 1.78 0.045 0.070 H 14.61 15.88 0.575 0.625 b3 1.14 1.73 0.045 0.068 L 1.78 2.79 0.070 0.110 2.54 BSC 0.100 BSC c 0.38 0.74 0.015 0.029 L1 - 1.65 - 0.066 c1 0.38 0.58 0.015 0.023 L2 - 1.78 - 0.070 c2 1.14 1.65 0.045 0.065 L3 D 8.38 9.65 0.330 0.380 L4 0.25 BSC 4.78 5.28 0.010 BSC 0.188 0.208 ECN: S-82110-Rev. A, 15-Sep-08 DWG: 5970 Notes 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Dimensions are shown in millimeters (inches). 3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body at datum A. 4. Thermal PAD contour optional within dimension E, L1, D1 and E1. 5. Dimension b1 and c1 apply to base metal only. 6. Datum A and B to be determined at datum plane H. 7. Outline conforms to JEDEC outline to TO-263AB. Document Number: 91364 Revision: 15-Sep-08 www.vishay.com 1 AN826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR D2PAK: 3-Lead 0.420 0.355 0.635 (16.129) (9.017) (10.668) 0.145 (3.683) 0.135 (3.429) 0.200 0.050 (5.080) (1.257) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Document Number: 73397 11-Apr-05 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000