Connectors SDA series Slot connectors for miniSD cards for Mobile Equipment Outline Features Principal Applications This connector for miniSD card has been developed to conform to the SD Card Association (SDA) standard. * Miniature low-profile * Half-lock structure restrains a card from popping out * Push-in/push-out structure ensures connector mating because "you feel a click" * Includes a positioning boss for mounting the connector on a PCB, and a hold-down to strengthen the attachment in the case of mounting on PCB. * A switch detects whether a card is inserted or not. Cellular phones, various small-sized mobile information terminals, digital cameras, and digital video cameras, etc. Rated current Insulation resistance Electrical Characteristics Dielectric withstanding voltage 0.5A 1000 megaohms at 500V DC 500V AC (r.m.s.) for one minute Contact resistance 100 milliohms or less Temperature range -25 to +85C Durability 10000 cycles of insertion and extraction Document Disclaimer When placing orders with us, minimum order quantities are set for every product. Be sure to contact us before starting preliminary design of PCBs using our connectors. The specifications and information shown in the catalog are subject to change without notice. Reflow temperature profile (for reference purposes) The reflow temperature profile shown in this drawing is for reference purposes. This profile depends on requirements such as reflow equipment, soldering paste, and PCB size. Thus, this profile may not meet with your specific situation. Please evaluate your PCB-mounting soldering and set your own reflow temperature profile. (C) Peak:250+50 C 250 230C or more Temperture 200 180C 150 Pre Heating Zone 150C 9030s 3010s 100 Soldering Zone 50 Heating time Product List PUSH/PUSH reverse type slot connector for miniSD card SDA-R11LFYG+ PUSH/PUSH onboard type Slot connector for miniSD card SDA-11LFYG+ G-38SDA SDA series...4 G-39SDA SDA series...5 For miniSD card For PCB PUSH/PUSH reverse type slot connector for miniSD card SDA-R11LFYG+ Right-angle SMT SDA standard Configuration of product Part No. SDA- R 11 LFY G + 0.850.1 1.40.1 0.3+0.05 0 (Card thickness) 0 1-0.1 11.30.1 0.15 No. of Terminals 8 7 6 5 4 1110 3 2 1 9 1.5MIN. 19.60.1 18.10.1 11.250.1 * 0.95+0.05 -0.12 0.5MAX. 1.30.110=13 23.20.1 1.8+0.1 0 1.8+0.1 0 1.7+0.1 0 X' 12-0.40.1 1.30.1 4.90.1 TM 1.7+0.1 0 DATE CODE 210.1 X 0.80.1 1(Push stroke) 0 1.5-0.1 (Displacement between centers of connector and card) 2-o0.8 90.05 Components 100.05 Insulator A 40.12 4.30.12 19.60.1 18.10.05 11.10.05 0 -0.1 Insulator B 1.4+0.1 0 100.05 +0.05 0 No. of Terminals coil spring Contact A for card detection Contact B for card detection 0 10-0.1 0.05 1.3 * Signal contacts Spring locking 1.7+0.1 0 0.1 10=13 Recommended PCB layout Mating connector: mimiSD cards that conform to SDA standard. Press-in 12-0.850.05 1.30.05 4.90.05 IDC Wire Soldering Crimping wrapping Others 2.4+0.1 0 X-X cross-section 0.9+0.1 0 8 7 6 5 4 1110 3 2 1 9 Pins SMT 90.05 2-o0.85 TM Shell Through hole Au-plated area (shell) 4 (Eject stroke) 260.2 240.1 1.2+0.1 0 11.250.05 18.10.05 20.1+0.1 0 (Card-inserted area) 3.5 (Card lock position) 2.10.05 Series name Connector type R: Reverse type No. of contacts Type of contacts LFY: Right-angle SMT, female Contact plating G: Gold plate For miniSD card For PCB PUSH/PUSH onboard type Slot connector for miniSD card SDA-11LFYG+ Right-angle SMT SDA standard Configuration of product Part No. SDA- 11 LFY G + Series name No. of contacts Type of contacts LFY: Right-angle SMT, female Contact plating G: Gold plate 0.55 23.3 Connector C L 0.55 Connector C L 9 1 2 31011 4 5 6 7 8 Insulator B Pins 0 o1.2-0.1 10.4 19.35 23.50.05 19.350.05 0.750.05 9.650.05 Card C L Connector C L 1.90.05 3.5 REF. * 1.40.05 2-o1.3+0.1 0 No. of Terminals 9 1 2 31011 4 5 6 7 8 Card C L 1.30.05 TM Shell 0.7 Components Insulator A 11.250.05 5.750.1 7.880.1 1.30.110=130.15 17.180.1 No. of Terminals TM 3.50.1 1(Push stroke) 11.25 0.4 1.30.1 0.15 0.55 18.70.05 15.950.05 12.280.05 1.90.05 DATE CODE 0.75 (Displacement between centers of connector and card) 1.40.1 (Card thickness) 2.2 0.3 18.95 12.28 1.5 1.5 Card C L Connector C L 24.3 (Card lock position) 4.2 (Eject stroke) 20.1+0.1 0 (Card-inserted area) coil spring Contact A for card detection 0.60.05 1.30.05 50.05 1.30.0510=130.1 17.180.05 Contact B for card detection * Signal contacts Spring locking 0.90.05 2.130.05 Recommended PCB layout Mating connector: mimiSD cards that conform to SDA standard. Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole