LBB127 Dual Single-Pole, Normally Closed OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max RON Ratings 250 200 10 Units VP mA Description Clare's LBB127 is a 250V, 200mA, 10 dual normally closed (1-Form-B) Solid State Relay that comprises two independently controlled, optically coupled MOSFET switches. The MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture to provide 3750 Vrms of input-to-output isolation. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. Features * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Small 8-Pin Package * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Versions Available This dual single-pole OptoMOS relay provides a more compact design solution than discrete single-pole relays in a variety of applications, and saves board space by incorporating both switches in a single 8-pin package. Approvals Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Part # LBB127 LBB127S LBB127STR LBB127P LBB127PTR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1,000/Reel) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1,000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Closed (Form B) Devices Form-B IF ILOAD 90% 10% Pb RoHS 2002/95/EC DS-LBB127-R04 toff e3 www.clare.com ton 1 LBB127 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate linearly 1.33 mW / C Derate linearly 6.67 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 1 2 Conditions Symbol Min Typ Max t =10ms IL=200mA VL=250VP IL ILPK RON ILEAK - 8 - 200 400 10 1 VL=50V, f=1MHz ton toff COUT - 50 5 5 - IL=200mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V Units mA A ms pF If both poles operate, then the load current must be derated so as not to exceed the package power dissipation value. www.clare.com R04 LBB127 PERFORMANCE DATA* 35 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical Turn-On Time (N=50, IF=5mA, IL=200mA, TA=25C) 25 Typical Turn-Off Time (N=50, IF=5mA, IL=200mA, TA=25C) 25 25 20 15 10 5 0 5 15 10 5 0.05 0.07 0.09 Turn-On (ms) 0.11 1.4 1.8 2.2 2.6 3.0 LED Current (mA) 15 10 5 1.0 1.4 0.75 1.05 1.35 1.60 1.95 Turn-Off (ms) Typical On-Resistance Distribution (N=50, IF=5mA, IL=200mA, TA=25C) 25 3.4 Device Count (N) 5 0.45 20 25 10 0.13 0 0 15 Typical IF for Switch Dropout (N=50, IL=200mA, TA=25C) 25 20 20 0 0.03 Device Count (N) Device Count (N) 10 0 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Typical IF for Switch Operation (N=50, IL=200mA, TA=25C) 25 15 Device Count (N) 1.17 20 Device Count (N) Device Count (N) Device Count (N) 30 1.8 2.2 2.6 LED Current (mA) 20 15 10 5 0 3.0 5.325 5.495 5.665 5.835 6.005 On-Resistance (:) 6.175 Typical Blocking Voltage Distribution (N=50, IF=5mA, TA=25C) 20 15 10 5 0 310 1.6 0.050 Typical Turn-Off vs. LED Forward Current (IL=200mA) 1.6 1.4 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 Turn-Off (ms) 1.2 Turn-On (ms) LED Forward Voltage Drop (V) 0.060 330 Typical Turn-On vs. LED Forward Current (IL=200mA) Typical LED Forward Voltage Drop vs. Temperature 1.8 314 318 322 326 Blocking Voltage (V) 0.040 0.030 0.020 0.010 0.8 -20 0 20 40 60 Temperature (C) 80 100 120 0.8 0.6 0.4 0.2 0 0 -40 1.0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R04 www.clare.com 3 LBB127 PERFORMANCE DATA* 0.12 2.5 0.08 0.06 0.04 250 IF=5mA 1.5 IF=10mA 1.0 IF=20mA 0.5 0.02 0 0 -40 -20 0 20 40 60 Temperature (C) 80 100 4.0 4.0 -20 0 20 40 60 80 2.5 2.0 1.5 1.0 -40 8.0 1.0 -20 0 20 40 60 Temperature (C) 80 200 Blocking Voltage (VRMS) 100 50 0 -50 -100 -150 -200 -1.2 -20 0 20 40 60 Temperature (C) 80 100 -0.4 0 0.4 0.8 120 80 100 5.0 4.0 3.0 2.0 -40 0.045 350 0.040 300 0.035 250 200 150 60 80 100 Temperature (C) Load Voltage (V) 60 0.015 0.005 40 40 0.020 0.010 20 20 0.025 50 0 0 0.030 100 -20 -20 Typical Leakage vs. Temperature Measured across Pins 5 & 6 or 7 & 8 400 -40 1.2 100 Temperature (C) 0 -0.8 80 6.0 Typical Blocking Voltage vs. Temperature (IF=5mA) 150 60 0 -40 100 Typical Load Current vs. Load Voltage (TA=25C) 40 1.0 Leakage (A) -40 20 7.0 1.5 0 0 Typical On-Resistance vs. Temperature (IF=5mA, IL=200mA) 2.0 0 -20 Typical IF for Switch Dropout vs. Temperature (IL=200mA) 2.5 0.5 50 Temperature (C) 3.0 0.5 100 Temperature (C) On-Resistance (:) LED Current (mA) 3.0 150 100 3.5 3.5 200 0 -40 Typical IF for Switch Operation vs. Temperature (IL=200mA) 4.5 LED Current (mA) Typical Load Current vs. Temperature 2.0 Turn-Off (ms) Turn-On (ms) 0.10 Load Current (mA) Typical Turn-Off vs. Temperature (IL=200mA) Load Current (mA) Typical Turn-On vs. Temperature (IF=5mA, IL=200mA) 0 -40 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R04 LBB127 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LBB127 / LBB127S / LBB127P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LBB127 / LBB127S 250C for 30 seconds LBB127P 260C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake may be necessary if a wash is used after solder reflow processes. Chlorine-based or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R04 RoHS 2002/95/EC e3 www.clare.com 5 LBB127 MECHANICAL DIMENSIONS LBB127 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) PCB Hole Pattern 7.620 0.254 (0.300 0.010) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) 0.457 0.076 (0.018 0.003) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 TYP (0.01) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) Dimensions mm (inches) 0.889 0.102 (0.035 0.004) LBB127S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.120 (0.032 0.004) LBB127P 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 0.127 (0.370 0.005) 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 0.013 (0.008 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 0.025 (0.085 0.001) 0.457 0.076 (0.018 0.003) 0.864 0.120 (0.034 0.004) 6 PCB Land Pattern Dimensions mm (inches) www.clare.com R04 LBB127 MECHANICAL DIMENSIONS LBB127S Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 LBB127P Tape & Reel 330.2 DIA. (13.00 DIA.) W = 16.00 (0.63) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier Embossment P = 12.00 (0.472) User Direction of Feed Ao = 10.30 (0.406) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LBB127-R04 (c)Copyright 2011, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/25/2011