DTM60091 512MB-64M x 72, 168-Pin Registered PC100 SDRAM DIMM Identification Part number: DTM60091 Performance range 100MHz (10ns@ CL=3) Features Description Burst mode operation The Dataram DTM60091 Assembly is a 64M bit x 72 Synchronous Dynamic RAM high density memory module. The DTM60091 consists of eighteen CMOS Stacked 64M x 4 bit Synchronous DRAMs in two TSOP-II 400MII packages, three 20-bits Drive ICs for input control signal, one PLL in 24-pin TSSOP package for clock and one 2K EEPROM in 8 pin TSSOP package for Serial Presence Detect on a 168pin glass-epoxy substrate. The DTM60091 is a Dual in-line Memory Module and is intented for mounting into 168-pin edge connector sockets. Auto & self refresh capability (4096 Cycles/64ms) LVTTL compatible inputs and outputs Single 3.3V0.3V power supply MRS cycle with address key programs Latency (Access from column adress) Burst length (1, 2, 4 & 8 page) Data scramble (Sequential & Interleave) Serial presence detect with EEPROM 168-pin PC100 DIMM double-sided assembly 5.250" wide by 1.70" high DATARAM Corporation P.O. Box 7528, Princeton, NJ 08543-7528; Voice: 609-799-0071, Fax: 609-799-6734, www.dataram.com Document 06004, Revision A, 5/6/99, Dataram Corporation (c) 1999 Page 1