FRONT FILE NEXT FILE Type N I S S E I UP MPC METALLIZED POLYPROPYLENE FILM CAPACITOR MPC Features Highly reliable because of its self-healing performance. Tangent of loss angle is normally low and its stable against change of frequency and temperature. Temperature characteristics of capacitance indicates negative. Recommended for high-frequency circuits. Specifications Temp range Voltage Insulation resistance -25+85 200 V.d.c400 V.d.c Capacitance 200 V 0.0102.2F (E-24) 400 V 0.0101.0F (E-24) Cap. tolerance 5(J)10(K) Tangent of loss angle 0.001 (at 1 KHz) Voltage proof or less C0.33F 25,000M or more C0.33F 7,500 F or more (100V.DC/1 min) Endurance 85 WV x125%, 1000hr C/C 5 tan 0.0012 or less within IR C0.39F 12,500M or more C0.39F 3,750F or more Damp heat 40 9095RH WV 500hr C/C 5 tan 0.0012 or less within IR C0.39F 12,500M or more C0.39F 3,750F or more WV x175% 15 sec Dimensions(mm) Type WV MPC Cap F E-12 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 W 12.0 H 9.0 9.5 MPC 200V.d.c T P 6.0 7.5 F 7.5 d 0.6 W 17.0 6.5 17.0 22.0 27.0 32.0 10.0 10.5 11.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 12.5 13.0 13.5 14.5 17.5 18.0 19.0 21.0 19.0 20.0 21.5 21.0 22.5 23.5 25.0 7.0 7.5 5.5 12.5 6.5 7.0 H 9.5 10.0 10.5 11.0 10.0 10.5 11.0 13.0 14.0 14.5 16.5 17.0 16.5 17.5 20.0 20.5 7.0 7.5 6.5 7.0 7.5 8.0 8.5 9.0 7.5 8.0 8.5 9.0 9.5 10.0 9.5 10.5 11.0 11.5 21.5 23.5 25.0 27.0 12.5 13.0 14.0 15.5 12.0 12.5 22.0 7.5 8.0 7.5 8.0 8.5 9.0 8.5 8.0 17.5 7.5/12.5 0.8 22.5 27.0 17.5 MPC 400V.d.c T P 6.5 12.5 32.0 8.5 10.5 11.0 12.5 12.0 13.5 14.5 16.0 27.5 8-14 F 7.5 d 0.6 17.5 7.5/12.5 0.8 22.5 17.5 27.5 22.5 22.5 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 33 - Type N I S S E I MPC / MPV METALLIZED POLYPROPYLENE FILM CAPACITOR MPV Features Recommended for high-frequency / high-voltage circuits, like resonance circuit in TV. Highly stable against change of frequency and temperature because of polypropylene film adopted as dielectric. Little self-heating of capacitors because of low Tangent of loss angle against hight frequency. Coated with flame retardant epoxy resin. Specifications Capacitance 0.0010.039F (E-12) Cap. tolerance 3%(H)5(J)10(K) Voltage proof Insulation resistance Endurance Damp heat or less WV(DC) Max T Max W 0.001 P 1.5 x200% 15sec Single formed lead type Max H Tangent of loss angle Straight lead type 1600 V.d.c (1,200 Vp-p at 15.75 KHz) 20Min 1.5Max Voltage Style -25+85 5.0MAX 5.0MAX 5.00.5 5.00.5 F 0.8 d0.05 F 0.8 30,000M or more (500 V.d.c/1 min) 85, WV x125%, 1000hr C/C 5 tan 0.0012 or less within IR 15,000M or more Cap Cap range Temp range 40 9095RH WV 500hr C/C 5 tan 0.0012 or less within IR 15,000M or more 200 V.dc 103225 400 V.dc 103105 1600 V.dc 102393 103273 333225 MPC MPV 103105 102393 F P For a pitch space (F) of the taping specification, refer to "TAPING DIMENSION"on p.5. Dimensions(mm) Type WV MPV E-12 CapF 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 8-14 W 22.5 28.0 30.0 33.0 38.0 H 10.5 11.0 11.5 12.0 12.5 13.0 13.5 12.0 13.5 14.5 15.0 16.0 17.5 18.5 20.0 20.5 22.0 23.5 24.5 25.5 MPV 1600V.d.c T P 6.0 17.5 6.5 7.0 7.5 8.5 9.0 8.0 8.5 9.0 9.5 10.5 10.0 10.5 11.5 12.5 13.5 13.0 14.5 13.0 F 17.5 d 0.6 0.8 22.5 22.5 25.0 25.0 27.5 27.5 32.5 32.5 1.0 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 34 - NISSEI PART NUMBER CODE SYSTEM (1) (2) Type (3) Lead Internal con fig use uration (4) Rated voltage (5) CapacitanceCapacitance tolerance value Model Code (Standard "0000") (6) Lead Dimensions Packing Mode code *2 (2) Lead configuration code Code *1 C Lead configuration Typical Code Samples Straight lead Single formed (leads) 5.0 Code 0200 22.5 0225 25.0 0250 27.5 0275 0125 0150 Style Code 1 0200 *4 2 D200 3 D210 Formed leads type Lead taping for automatic insertion machine (Straight leads) 0175 20.0 Lead spacing (F) after forming indicated as multiplied by 10.Always in bulk Type S 17.5 0100 15.0 Lead taping for automatic insertion machine (Formed leads) Code 0075 12.5 Double formed (leads) Lead length multiplied by 10.Always in bulk F (mm) Lead spacing 0050 *3 10.0 V No lead processing and always in bulk (0000) 0050 Cut shorter (cut leads) 7.5 D Description 0000 F (mm) Lead spacing F (6) Lead dimension /Packing mode 4 D220 5 0200 6 0200 Single / Double-formed leads taped and ammo-packed. See p.5 to 6. 0200 (AMZ50V& Straight leads taped and ammo-packed. See p.5 to 6. AMC:C220) Straight leads type *1 The blank square signifies a straight lead type. *2 some types could bear different lead dimension codes, to be confirmed each case. As to reel packing, contact Nissei. *3 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "1050". *4 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "A210". (3) Rated Voltage (V.d.c,V.a.c) Voltage Code 25 35 50 63 100 125 200 250 275 315 400 450 630 800 1000 1250 1600 0025 0035 0050 0063 0100 0125 0200 0250 0275 0315 0400 0450 0450 0800 1000 1250 1600 (4) Capacitance Tolerance Code F G H J K M Tolerance (%) +/- 1 +/- 2 +/- 3 +/- 5 +/- 10 +/- 20 (5) Capacitance Code Capacitance (pF) expressed in 3-digit code. The first two digits: Significant figures of capacitance value. The third digit: The number of zeros to follow the significant figures. Coding Sample 1) Coding of: AMZ 50V, 0.10 microF, +/-5%, SINGLE formed, taped and ammo-packed AMZ V (1) (2) Internal use 0050 (3) J 104 (4) (5) 0000 0200 Model Code (6) (Standard "0000") 2) Coding of MMC 250V 1.0 F +/-10%, single formed with 15.0mm leads, in bulk MMC F (1) (2) Internal use 0250 K 105 (3) (4) (5) 0000 0150 Model Code (6) (Standard "0000") 3) Coding have: MMT 50V 0.1 microF +/-5%, straight lead (in bulk) MMT (1) 0050 (2) Internal use (3) J 104 (4) (5) 0000 0050 Model Code (6) (Standard "0000") When using our capacitors, please consider the application notes on pages 8-15 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics.