5082-7651-DD000 - Agilent / Hewlett-Packard

Features

• Industry Standard Size

• Industry Standard Pinout

7.62 mm (0.300 inch) DIP Leads

on 2.54 mm (0.100 inch) Centers

• Choice of Colors

AlGaAs Red, High Efficiency Red,

Yellow, Green

• Excellent Appearance

Evenly Lighted Segments

±50° Viewing Angle

Optimum Contrast Given by

Gray Top Surface for AlGaAs Red

and Green Devices

Red Top Surface for HER Devices

Yellow Top Surface for Yellow

Devices

• Design Flexibility

Common Anode or

Common Cathode

Single Digits

Left or Right Hand Decimal Point

±1. Overflow Character

• Categorized for Luminous

Intensity

Yellow and Green Categorized for

Color

Use of Like Categories Yields a

Uniform Display

• High Light Output

• High Peak Current

• Excellent for Long Digit String

Multiplexing

• Intensity and Color Selection

Available

See Intensity and Color Selected

Displays Data Sheet

• Sunlight Viewable AlGaAs

AlGaAs[1] HER[1] Yellow Green Package

Red HDSP- 5082- 5082- HDSP- Description Drawing

7610 7620 3600 7.6 mm Common Anode Left Hand Decimal A

7611 7621 3601 7.6 mm Common Anode Right Hand Decimal B

7613 7623 3603 7.6 mm Common Cathode Right Hand Decimal C

7616 7626 3606 7.6 mm Universal ±1. Overflow Right Hand Decimal[2] D

E150 7650 7660 4600 10.9 mm Common Anode Left Hand Decimal E

E151 7651 7661 4601 10.9 mm Common Anode Right Hand Decimal F

E153 7653 7663 4603 10.9 mm Common Cathode Right Hand Decimal G

E156 7656 7666 4606 10.9 mm Universal ±1. Overflow Right Hand Decimal[2] H

Notes:

1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data

sheet for low current operation.

2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.

3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.

Devices

5082-761x Series

5082-762x Series

5082-765x Series

5082-766x Series

HDSP-360x Series

HDSP-460x Series

HDSP-E15x Series

7.6 mm (0.3 inch)/10.9 mm

(0.43 inch) Seven Segment

Displays

Technical Data

Description

The 7.6 mm (0.3 inch) and 10.9

mm (0.43 inch) LED seven

segment displays are designed for

viewing distances up to 3 metres

(10 feet) and 5 metres (16 feet).

These devices use an industry

standard size package and

pinouts. All devices are available

as either common anode or

common cathode.

Part Numbering System

Notes:

1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest

Agilent representative for details.

2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1

bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.

5082 -X X X X-X X X X X

HDSP-X X X X-X X X X X

Mechanical Options[1]

00: No Mechanical Option

Color Bin Options[1,2]

0: No Color Bin Limitation

4: Color Bin 4 Only (applicable for Green devices only)

B: Color Bins 2 and 3 (applicable for Yellow devices only)

Maximum Intensity Bin[1,2]

0: No Maximum Intensity Bin Limitation

Minimum Intensity Bin[1,2]

0: No Minimum Intensity Bin Limitation

Device Configuration/Color[1]

0: Common Anode

1: Common Anode

3: Common Cathode

Device Specific Configuration[1]

Refer to Respective Datasheet

Package[1]

E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display

displays are ideal for portable

applications. The high light

ambient displays are ideal for

high light ambients or long string

lengths. For additional informa-

tion see the Low Current Seven

Segment Displays, or High Light

Ambient Seven Segment Displays

data sheets.

NOTES;

1. DIMENSIONS IN

MILLIMETRES AND

(INCHES).

2. ALL UNTOLERANCED

DIMENSIONS ARE

FOR REFERENCE

ONLY.

3. REDUNDANT

ANODES.

4. UNUSED DP

POSITION.

5. SEE INTERNAL

CIRCUIT DIAGRAM.

6. REDUNDANT

CATHODE.

7. SEE PART NUMBER

TABLE FOR L.H.D.P.

AND R.H.D.P.

DESIGNATION.

8. FOR YELLOW AND

GREEN DEVICES

ONLY.

Package Dimensions

These displays are ideal for most

applications. Pin for pin equiva-

lent displays are also available in

a low current or high light

ambient design. The low current

Internal Circuit Diagram

Absolute Maximum Ratings

AlGaAs Red HER Yellow Green

HDSP-E150 5082-7610/ 5082-7620/ HDSP-3600/

Description Series 7650 Series 7660 Series 4600 Series Units

Average Power per Segment or DP 96 105 80 105 mW

Peak Forward Current per 160[1] 90[3] 60[5] 90[7] mA

Segment or DP

DC Forward Current per 40[2] 30[4] 20[6] 30[8] mA

Segment or DP

Operating Temperature Range -20 to +100[9] -40 to +100 °C

Storage Temperature Range -55 to +100 °C

Reverse Voltage per 3.0 V

Segment or DP

Wave Soldering Temperature for

3 Seconds (1.59 mm [0.063 in.] 250 °C

below Body)

Notes:

1. See Figure 1 to establish pulsed conditions.

2. Derate above 46°C at 0.54 mA/°C.

3. See Figure 6 to establish pulsed conditions.

4. Derate above 53°C at 0.45 mA/°C.

5. See Figure 7 to establish pulsed conditions.

6. Derate above 81°C at 0.52 mA/°C.

7. See Figure 8 to establish pulsed conditions.

8. Derate above 39°C at 0.37 mA/°C.

9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.

Electrical/Optical Characteristics at TA = 25°C

Device

Series Parameter Symbol Min. Typ. Max. Units Test Conditions

Luminous Intensity/Segment[1, 2, 5] IV8.5 15.0 mcd IF = 20 mA

(Digit Average)

1.8 V IF = 20 mA

Forward Voltage/Segment or DP VF

2.0 3.0 V IF = 100 mA

HDSP-

E15x Peak Wavelength λPEAK 645 nm

Dominant Wavelength[3] λd637 nm

Reverse Voltage/Segment or DP[4] VR3.0 15 V IR = 100 µA

Temperature Coefficient of ∆VF/°C -2 mV/°C

VF/Segment or DP

Thermal Resistance LED Junction- RθJ-PIN 340 °C/W/Seg

to-Pin

AlGaAs Red

Device

Series Parameter Symbol Min. Typ. Max. Units Test Conditions

5082-761x Luminous Intensity/Segment[1,2,6] 340 800 µcd IF = 5 mA

(Digit Average) IV

5082-765x 340 1115 µcd IF = 5 mA

Forward Voltage/Segment or DP VF2.1 2.5 V IF = 20 mA

Peak Wavelength λPEAK 635 nm

Dominant Wavelength[3] λd626 nm

All

Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA

Temperature Coefficient of ∆VF/°C -2 mV/°C

VF/Segment or DP

Thermal Resistance LED RθJ-PIN 280 °C/W

Junction-to-Pin

High Efficiency Red

Device

Series Parameter Symbol Min. Typ. Max. Units Test Conditions

5082-762x Luminous Intensity/Segment[1,2] 205 620 µcd IF = 5 mA

(Digit Average) IV

5082-766x 290 835 µcd IF = 5 mA

Forward Voltage/Segment or DP VF2.2 2.5 V IF = 20 mA

Peak Wavelength λPEAK 583 nm

Dominant Wavelength[3,7] λd581.5 586 592.5 nm

All

Reverse Voltage/Segment or DP[4] VR3.0 40 V IR = 100 µA

Temperature Coefficient of ∆VF/°C -2 mV/°C

VF/Segment or DP

Thermal Resistance LED RθJ-PIN 280 °C/W/Seg

Junction-to-Pin

Yellow

Notes:

1. Device case temperature is 25°C prior to the intensity measurement.

2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.

3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of

the device.

4. Typical specification for reference only. Do not exceed absolute maximum ratings.

5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin

for pin compatible with the HDSP-E15X series.

6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for

pin compatible with the 5082-7650 series.

7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is

designated by a number adjacent to the luminous intensity category letter.

High Performance Green

Device Test

Series Parameter Symbol Min. Typ. Max. Units Conditions

HDSP-360x Luminous Intensity/Segment[1,2] 860 2700 µcd IF = 10 mA

(Digit Average) IV

HDSP-460x 1030 4000 µcd IF = 10 mA

Forward Voltage/Segment or DP VF2.1 2.5 V IF = 10 mA

Peak Wavelength λPEAK 566 nm

Dominant Wavelength[3,7] λd571 577 nm

All

Reverse Voltage/Segment or DP[4] VR3.0 50 V IR = 100 µA

Temperature Coefficient of ∆VF/°C -2 mV/°C

VF/Segment or DP

Thermal Resistance LED RθJ-PIN 280 °C/W/Seg

Junction-to-Pin

Figure 3. Forward Current vs. Forward Voltage.

Figure 2. Maximum Allowable DC Current vs.

Ambient Temperature.

Figure 4. Relative Luminous Intensity vs. DC

Forward Current.

Figure 5. Relative Efficiency (Luminous Intensity

per Unit Current) vs. Peak Current.

AlGaAs Red

Figure 1. Maximum Allowed Peak Current vs. Pulse

Duration – AlGaAs Red.

MAX. – MAXIMUM DC CURRENT PER SEGMENT – mA

– AMBIENT TEMPERATURE – °C

30 90 120

7050

AlGaAs RED

40 60 80 100 110

45 Rθ

J-A

= 770°C/W

IF – FORWARD CURRENT PER SEGMENT – mA

VF – FORWARD VOLTAGE – V

160

100

2.0 4.0

1.0 3.0

AlGaAs RED

0.5 1.5 2.5 3.5

120

140

RELATIVE LUMINOUS INTENSITY

(NORMALIZED TO 1 AT 20 mA)

– FORWARD CURRENT PER SEGMENT – mA

2.00

1.50

1.25

0.75

0.25

20 40

1.75

1.00

0.50

10 30

5152535

AlGaAs RED

PEAK

– NORMALIZED RELATIVE EFFICIENCY

0.5

0.6

PEAK

– PEAK FORWARD CURRENT

PER SEGMENT – mA

50.0 150.0

1.4

0.8

5.0

1.0

1.2

AlGaAs RED

HER, Yellow, Green

Figure 6. Maximum Tolerable Peak Current vs.

Pulse Duration – HER Series.

Figure 7. Maximum Tolerable Peak Current vs.

Pulse Duration – Yellow Series.

Figure 8. Allowable Peak Current vs.

Pulse Duration – Green Series.

Figure 9. Maximum Allowable DC Current vs.

Ambient Temperature.

Figure 11. Relative Luminous

Intensity vs. DC Forward Current.

Figure 10. Forward Current vs.

Forward Voltage.

Figure 12. Relative Luminous

Efficiency (Luminous Intensity per

Unit Current) vs. Peak Current.

HDSP-E15x

IV Bin Category Min. Max.

L 8.67 15.90

M 13.00 23.80

N 19.50 35.80

O 29.30 53.60

P 43.90 80.50

Intensity Bin Limits (mcd)

AlGaAs Red

HER

5082-761x

IV Bin Category Min. Max.

B 0.369 0.630

C 0.516 0.946

D 0.774 1.418

E 1.160 2.127

F 1.740 3.190

G 2.610 4.785

H 3.915 7.177

5082-765x

IV Bin Category Min. Max.

B 0.347 0.593

C 0.485 0.890

D 0.728 1.333

E 1.091 2.000

F 1.636 3.000

G 2.454 4.500

H 3.682 6.751

Yellow

5082-762x

IV Bin Category Min. Max.

B 0.229 0.387

C 0.317 0.582

D 0.476 0.872

E 0.714 1.311

F 1.073 1.967

G 1.609 2.950

H 2.413 4.425

5082-766x

IV Bin Category Min. Max.

C 0.297 0.543

D 0.445 0.817

E 0.669 1.225

F 1.003 1.838

G 1.504 2.758

H 2.256 4.137

HDSP-460x

IV Bin Category Min. Max.

G 1.03 1.88

H 1.54 2.82

I 2.31 4.23

J 3.46 6.34

K 5.18 9.50

L 7.78 14.26

Green

HDSP-360x

IV Bin Category Min. Max.

H 0.86 1.58

I 1.29 2.37

J 1.94 3.55

K 2.90 5.33

L 4.37 8.01

Contrast Enhancement

For information on contrast

enhancement, please see

Application Note 1015.

Soldering/Cleaning

For information on soldering

LEDs, please refer to Application

Note 1027.

Note:

All categories are established for classification of products. Products

may not be available in all categories. Please contact your Agilent

representatives for further clarification/information.

Dominant Wavelength (nm)

Color Bin Min. Max.

Yellow 1 581.50 585.00

3 584.00 587.50

2 586.50 590.00

4 589.00 592.50

Green 2 573.00 577.00

3 570.00 574.00

4 567.00 571.00

5 564.00 568.00

Color Categories

www.agilent.com/semiconductors

For product information and a complete list of

distributors, please go to our web site.

For technical assistance call:

Americas/Canada: +1 (800) 235-0312 or

(916) 788-6763

Europe: +49 (0) 6441 92460

China: 10800 650 0017

Hong Kong: (+65) 6756 2394

India, Australia, New Zealand: (+65) 6755 1939

Japan: (+81 3) 3335-8152 (Domestic/Interna-

tional), or 0120-61-1280 (Domestic Only)

Korea: (+65) 6755 1989

Singapore, Malaysia, Vietnam, Thailand,

Philippines, Indonesia: (+65) 6755 2044

Taiwan: (+65) 6755 1843

Data subject to change.

Obsoletes 5963-7394E

July 17, 2004

5988-3325EN