BX DIELECTRIC BX characteristics are identical to X7R dielectric, with the added restriction that the Temperature-Voltage Coefficient (TVC) is not to exceed -25% C at rated voltage, over the operating temperature range (-55C to 125C). NOVACAP manufactures chips using dielectrics with minimal voltage coefficient and layer thickness designed to meet BX requirements. COMMERCIAL & HIGH RELIABILITY M A X C A P & V O LT A G E CAPACITANCE & VOLTAGE SELECTION 3 digit code: two significant digits, followed by number of zeros eg: 473 = 47,000 pF SIZE 0402 0504 0603 0805 1005 1206 1210 1808 1812 1825 2221 2225 Min Cap 121 121 121 121 121 121 121 151 151 471 471 471 Tmax .024 .044 .035 .054 .054 .064 .065 .065 .065 .080 .080 .080 16V 562 393 273 104 124 274 474 564 105 185 155 225 25V 472 333 223 104 124 274 474 564 105 155 125 185 50V 182 183 123 473 683 124 274 274 564 125 125 155 100V 681 682 472 183 183 473 104 104 184 394 334 474 200V 221 182 122 562 822 153 273 333 563 104 823 124 250V * 681 391 182 272 472 103 103 223 563 473 683 300V * * * 122 122 332 562 682 123 393 333 473 400V * * * 681 681 182 332 392 562 183 183 223 500V * * * 391 471 102 222 222 392 123 103 153 H T M HOW TO ORDER 2225 SIZE See Chart X 124 DIELECTRIC CAPACITANCE Value in X = BX Picofarads Two significant figures, followed by number of zeros: 103=10,000 pF www.. N O V A C A P . com K 302 N TOLERANCE VOLTAGE-VDCW TERMINATION J= +/- 5% Two significant figures, followed by number of zeros: 302=3000V K= +/- 10% M= +/- 20% N=Nickel Barrier X THICKNESS OPTION X=Non-standard thickness. Specify P=Palladium Silver in Mils if nonstandard is Y=Nickel Barrier required. (90 Tin/10 Lead) Standard items are any thickness to Max. shown in charts. (100% Tin) Catalog 09-08-PC - HB HIGH REL PACKING MARKING TESTING OPTION OPTION TESTING OPTION (Optional) T=Reeled M = Marked Specify See Marking test Specification criteria if required HB = MILPRF-55681 GROUP A HK = MIL-PRF-38534 CLASS K HS = MIL-PRF-123 GROUP A 19 STANDARD SMT CHIP P/N BREAKDOWN 1206 N 472 J 101 N X050 H T M - HB Marking Case Size M = Marked None = Unmarked Marking not available on sizes 0603 and below Dielectric Code Code EIA Class Packaging N B X Y COG/NP0 X7R BX Y5V Ultra Stable Stable MIL General Purpose Z S D E F G W P R Z5U X8R COG/NPO Class II (Stable) 160 160 X5R 85 200 General Purpose High Temp up to 150C High Temp up to 200C High Temp up to 200C High Temp up to 160C High Temp up to 160C Stable Pulse Power Pulse Energy T= Tape and Reel W = Waffle Pack None = Bulk High Reliability Testing H = High Reliability Testing Required None = Standard SMT, no High-Rel HB = MIL-PRF-55681 Group A HK = MIL-PRF-38534 Class K HS = MIL-PRF-123 Group A Special Thickness Capacitance X in the part number denotes a special thickness other than standard. Specify in mils if required. (As shown above X=.050") If no X in the part number then thickness is standard per Novacap catalog specifications. 1st two digits are significant, third digit denotes number of zeros, R= decimal Examples: 1R0 = 1.0 pF 120 = 12 pF 471 = 470 pF 102 = 1,000 pF 273 = .027 F 474 = 0.47 F 105 = 1.0 F Termination Capacitance Tolerance COG NPO Cap Value < 10pF Code B C D 0.10pF 0.25pF 0.50pF F G J K M Z P 1% 2% 5% 10% 20% +80% -20% +100%/-0% X7R BX Z5U Y5V X8R 150C D/F E/G W X5R N = Nickel Barrier (100% Tin) (RoHS) P = Palladium Silver PR = Palladium Silver (RoHS) Y = Nickel Barrier (90%Tin/10%Lead) S = Silver C = Polymer with Nickel Barrier (100% Tin) (RoHS) D = Polymer with Nickel Barrier (90%Tin/10%Lead) V = Non-Solderable Silver (RoHS) NG = Nickel Gold Voltage Examples: 160 = 16 Volts 101 = 100 Volts 501 = 500 Volts 102 = 1000 Volts 502 = 5000 Volts 103 = 10,000 Volts This ordering information relates to NOVACAP's standard surface mount capacitors. Please refer to the specific catalog pages for ordering information for our application specific products; ie: Stacked, Leaded, Capacitor Arrays, Pulsed Power capacitors and other specialty products. 10 Catalog 11-08-PC www.. N O V A C A P . com CODES AND DIMENSIONS PART NUMBER CODE COMBINATIONS PREFIX DEFINITIONS LS = Y3 Certified Safety Capacitor ES = Y2 Certified Safety Capacitor AP = Arc Prevention Capacitor CR = Cap-Rack Capacitor Array RC = Bleed Resistor RD = Ring Detect Capacitor ST = Stacked Capacitor Assembly SM = Hi-Rel Stacked Capacitor Assembly N (COG/NPO) - 43 - 37 - 55 - 55 B (X7R) X (BX) 125 N, P, Y, C, D, S, V, NG, PR 125 N, P, Y, C, D, S, V, NG, PR Y (Y5V) 85 N, Y, C, D Z (Z5U) 85 N, Y, C, D D (NPO-HIGH TEMP) E (CLASS 11-HIGH TEMP) 200 P, S, V, PR 200 P, S, V, PR F (NPO-HIGH TEMP) 160 N, P, Y, S, V, C, D, PR G (CLASS 11-HIGH TEMP) 160 N, P, Y, S, V, C, D, PR S (X8R) 150 N, P, Y, S, V, C, D, PR P (PULSE POWER) 85 P, PR R (R2D) 200 P, PR W (X5R) 85 N, Y, NG MB W 0907 1005 1206 1210 1515 1808 1812 1825 INCHES (MM) 0805 DIMENSIONS 0603 LENGTH L .040 (1.02) .050 (1.27) .060 (1.52) .080 (2.03) .090 (2.29) .100 (2.54) .125 (3.18) .125 (3.18) .150 (3.81) .180 (4.57) .180 (4.57) .180 (4.57) INCHES (MM) 0504 TOLERANCE +/- 0402 Max. Temp. Terminations (allowed) Rated 125 N, P, Y, S, V, NG, PR Dielectric Code T L SIZE pg. 38 pg. 39 pg. 54 pg. 42 pg. 34 pg. 40 pg. 54 pg. 54 LENGTH WIDTH W .020 (.508) .040 (1.02) .030 (.762) .050 (1.27) .070 (1.78) .050 (1.27) .060 (1.52) .100 (2.54) .150 (3.81) .080 (2.03) .125 (3.18) .250 (6.35) T MAX. .024 (.610) .044 (1.12) .035 (.889) .054 (1.37) .054 (1.37) .054 (1.37) .064 (1.63) .065 (1.65) .130 (3.30) .065 (1.65) .065 (1.65) .080 (2.03) MB .010 (.254) .014 (.356) .014 (.356) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .030 (.762) .024 (.610) .024 (.610) .024 (.610) .004 (.102) .006 (.152) .006 (.152) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .015 (.381) .012 (.305) .012 (.305) .012 (.305) WIDTH .004 (.102) .006 (.152) .006 (.152) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .015 (.381) .008 (.203) .008 (.203) .015 (.381) MB .006 (.152) .006 (.152) .006 (.152) .010 (.254) .010 (.254) .010 (.254) .010 (.254) .010 (.254) .015 (.381) .014 (.356) .014 (.356) .014 (.356) DIMENSIONS INCHES (MM) TOLERANCE +/- INCHES (MM) SIZE 2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 LENGTH L .200 (5.08) .220 (5.59) .220 (5.59) .250 (6.35) .330 (8.38) .350 (8.89) .400 (10.2) .450 (11.4) .540 (13.7) .550 (14.0) .650 (16.5) .750 (19.1) WIDTH W .200 (5.08) .210 (5.33) .250 (6.35) .200 (5.08) .330 (8.38) .300 (7.62) .400 (10.2) .400 (10.2) .400 (10.2) .500 (12.7) .600 (15.2) .650 (16.5) T MAX. .180 (4.57) .080 (2.03) .080 (2.03) .180 (4.57) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) MB .024 (.610) .030 (.762) .030 (.762) .030 (.762) .030 (.762) .030 (.762) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) LENGTH .015 (.381) .015 (.381) .015 (.381) .015 (.381) .017 (.432) .018 (.457) .020 (.508) .023 (.584) .027 (.686) .028 (.711) .033 (.838) .038 (.965) WIDTH .015 (.381) .015 (.381) .015 (.381) .015 (.381) .017 (.432) .015 (.381) .020 (.508) .020 (.508) .020 (.508) .025 (.635) .030 (.762) .033 (.838) MB .014 (.356) .015 (.381) .015 (.381) .015 (.381) .015 (.381) .015 (.381) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .020 (.508) www.. N O V A C A P . com Catalog 11-08-PC 11