Solid State Relays G3M 415
Solid State Relays
G3M
Zero Cross Models Added to Compact,
Low-cost G3M Series
• 2, 3 and 5A single in-line package SSR
• Thin design for high-density PCB applications.
• DC input-AC output for up to a 5-A load.
• Certified by UL, CSA, and VDE.
Ordering Information
To order: Select the part number and add the desired input voltage rating. (e.g., G3M-202P-US DC5)
(This table continues on the next page)
Note: 1. All models have UL and CSA approvals.
2. TÜV Marking is available with “-UTU” in place of “-US” on the part number
3. G3M-205P(L)-VD is approved by UL, CSA and VDE
Isolation Input terminal
pitch
Zero cross
function
Indicator Rated output load
(Applicable output load)
Rated input voltage Model
Phototriac 7.62 mm Yes No 2 A at 100 to 240 VAC
(2 A at 75 to 264 VAC)
5 VDC G3M-202P-US
12 VDC
24 VDC
3 A at 100 to 240 VAC
(3 A at 75 to 264 VAC)
5 VDC G3M-203P
12 VDC
24 VDC
5 A at 100 to 240 VAC
(5 A at 75 to 264 VAC)
5 VDC G3M-205P
12 VDC
24 VDC
No 2 A at 100 to 120 VAC
(2 A at 75 to 132 VAC)
5 VDC G3M-102PL-US
12 VDC
24 VDC
2 A at 100 to 240 VAC
(2 A at 75 to 264 VAC)
5 VDC G3M-202PL-US
12 VDC
24 VDC
3 A at 100 to 240 VAC
(3 A at 75 to 264 VAC)
5 VDC G3M-203PL
12 VDC
24 VDC
5 A at 100 to 240 VAC
(5 A at 75 to 264 VAC)
5 VDC G3M-205PL
12 VDC
24 VDC
416 Solid State Relays G3M
Ordering information continued
Note: 1. All models have UL and CSA approvals.
2. TÜV Marking is available with “-UTU” in place of “-US” on the part number
3. G3M-205P(L)-VD is approved by UL, CSA and VDE
Specifications
■Ratings (at an Ambient Temperature of 25°C)
Input
Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions.
Output
Isolation Input terminal
pitch
Zero cross
function
Indicator Rated output load
(Applicable output load)
Rated input voltage Model
Phototriac 5.08 mm Yes No 2 A at 100 to 240 VAC
(2 A at 75 to 264 VAC)
5 VDC G3M-202P-US-4
12 VDC
24 VDC
3 A at 100 to 240 VAC
(3 A at 75 to 264 VAC)
5 VDC G3M-203P-4
12 VDC
24 VDC
5 A at 100 to 240 VAC
(5 A at 75 to 264 VAC)
5 VDC G3M-205P-4
12 VDC
24 VDC
No 2 A at 100 to 120 VAC
(2 A at 75 to 132 VAC)
5 VDC G3M-102PL-US-4
12 VDC
24 VDC
2 A at 100 to 240 VAC
(2 A at 75 to 264 VAC)
5 VDC G3M-202PL-US-4
12 VDC
24 VDC
3 A at 100 to 240 VAC
(3 A at 75 to 264 VAC)
5 VDC G3M-203PL-4
12 VDC
24 VDC
5 A at 100 to 240 VAC
(5 A at 75 to 264 VAC)
5 VDC G3M-205PL-4
12 VDC
24 VDC
Rated voltage Operating voltage Impedance Voltage levels
Must operate voltage Must release voltage
5 VDC 4 to 6 VDC 300 Ω ±20% 4 VDC max. 1 VDC min.
12 VDC 9.6 to 14.4 VDC 800 Ω ±20% 9.6 VDC max.
24 VDC 19.2 to 28.8 VDC 1.6 kΩ ±20% 19.2 VDC max.
Model Rated voltage Applicable load
Load voltage range Load current Inrush current
G3M-102PL-US(-4) 100 to 120 VAC 75 to 132 VAC 0.1 to 2 A 30 A (60 Hz, 1 cycle)
G3M-202P(L)-US(-4) 100 to 240 VAC 75 to 264 VAC
G3M-203P(L)(-4) 0.1 to 3 A 45 A (60 Hz, 1 cycle)
G3M-205P(L)(-4) 0.1 to 5 A
Solid State Relays G3M 417
■Characteristics
■Approvals
UL Recognized (File No. E64562) / CSA Certified (File No. LR35535) - - Ambient Temp. = 40°C
Item G3M-102PL-US(-4) G3M-202P(L)-US(-4) G3M-203P(L)(-4) G3M-205P(L)(-4)
Operate time 1 ms max. (1/2 of load power source cycle + 1 ms max. for G3M-202P, G3M-203P, G3M-205P)
Release time 1/2 of load power source cycle + 1 ms max.
Output ON voltage drop 1.6 V (RMS) max.
Leakage current 2 mA max. (at 100 VAC) 2 mA max. (at 100 VAC)
5 mA max. (at 200 VAC)
1.5 mA (at 200 VAC)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min 2,500 VAC, 50/60 Hz for 1 min
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Malfunction: 1,000 m/s2 (approx. 100G)
Ambient temperature Operating: –30°C to 80°C (with no icing or condensation)
Storage: –30°C to 100°C (with no icing or condensation)
Ambient humidity Operating: 45% to 85%
Weight Approx. 15 g Approx. 25 g
Input Voltage SSR Type Load Rating
5, 12, 24 VDC With Suffixes 102 and
US or UTU
2 A, 125 VAC, Resistive
250 W, 125 VAC Tungsten
2 A FLA / 12 A LRA, 125 VAC
With Suffixes 202 and
US
2 A, 250 VAC, Resistive
500 W, 250 VAC Tungsten
2 A FLA / 12 A LRA, 250 VAC
With Suffixes 202 and
UTU
2 A, 250 VAC, Resistive
250 W, 250 VAC Tungsten
1 A FLA / 6 A LRA, 250 VAC
With Suffixes 203 and
US or UTU
3 A, 250 VAC, Resistive
750 W, 250 VAC Tungsten
1.5 A FLA / 9 A LRA, 250 VAC
With Suffix 205 5 A, 250 VAC, Resistive
1,250 W, 250 VAC Tungsten
2.5 A FLA / 15 A LRA, 250 VAC
418 Solid State Relays G3M
Engineering Data
Load Current vs. Ambient Temperature Inrush Current Immunity
Load Current vs. Ambient Temperature (Close Mounting)
G3M-205 Series (5-A Load)
•Thirty Relays are soldered to the PCB at each given spacing.
•Continuous power.
Load current (A)
Ambient temperature (°C)
Inrush peak current (A)
Energized time (ms)
G3M-205P(L)(-4)
G3M-203P(L)(-4)
G3M-102PL-US(-4)
G3M-202P(L)-US(-4)
Non-repetitive
Reduce the current to 1/2 or less if the
G3M is in repetitive operation.
G3M-203P(L)(-4)
G3M-205P(L)(-4)
G3M-102PL-US(-4)
G3M-202P(L)-US(-4)
0.8A L=7.62 mm
1.8A L=12.7 mm
0.8A L=7.62 mm
1.8A L=12.7 mm
1.5A L=12.7 mm
2.0A L=20.37 mm
10
3
6
5
4
3
2
1
010080604020 250−20−30
0.6A L=7.62 mm
6
5
4
3
2
1
010080604020 250−20−30
2.5A L=20.37 mm
6
5
4
3
2
1
010080604020 250−20−30
2.5A L=20.37 mm
L
L
LL
10
3
LL
10
Load current (A)
Ambient temperature (°C)
Load current (A)
Ambient temperature (°C)
Load current (A)
Ambient temperature (°C)
X direction Y direction Z direction
Top
Bottom
Top
Bottom
Top
Bottom
Solid State Relays G3M 419
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Precautions
Protective Element
No overvoltage absorption element is built in. Therefore, if the G3M
is connected to an inductive load, be sure to connect the overvoltage
absorption element.
G3M-102PL-US(-4), G3M-202P(L)-4
G3M-203P(L)-4
47.62
4±2
12.7 10.16 0.7 0.4
1.5
(5.08)*
2.54
2.54
*Input terminal pitch for models ending in "-4" is 5.08 mm.
40 max.
20 max.
9 max.
Load
Input voltage
Input Load
Four, 1.2 dia. holes
Terminal Arrangement
(Bottom View)
PCB Dimensions
(Bottom View)
Load power
supply
"-4" type
(4)4123
G3M-205P(L)-4 7.6±0.2
47.62 12.7
4±2
10.16 0.7 0.4
1.65
(5.08)*
40 max.
25 max.
41
23
41
23
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
420 Solid State Relays G3M
MEMO
14
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
•
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
•
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
•
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2010.1
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2010 All Right Reserved.
Cat. No. J29I-E-01 06/09 Note: Specications are subject to change. © 2010 Omron Electronics LLC
OMRON CANADA, INC. • HEAD OFFICE
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE
OMRON ARGENTINA • SALES OFFICE
OMRON CHILE • SALES OFFICE
OTHER OMRON LATIN AMERICA SALES
OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS
OMRON EUROpE B.V.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
G3M-203P-4-DC24 G3M-202P-US-DC12 G3M-203P-DC12 G3M-203P-DC24 G3M-202P-US-4-DC12 G3M-202P-
US-DC24 G3M-203P-DC5 G3M-202P-US-4-DC5 G3M-205PL-DC24 G3M-203PL-DC24 G3M-205PL-DC12 G3M-
205PL-DC5 G3M-202P-US-DC5 G3M-102PL-US DC12 G3M-102PL-US DC24 G3M-102PL-US-4 DC12 G3M-102PL-
US-4 DC24 G3M-102PL-US-4 DC5 G3M-202PL-US DC12 G3M-202PL-US DC24 G3M-202PL-US-4 DC12 G3M-
202PL-US-4 DC24 G3M-202PL-US-4 DC5 G3M-202P-US-4 DC24 G3M-203P-4 DC12 G3M-203P-4 DC5 G3M-
203PL DC12 G3M-203PL DC5 G3M-203PL-4 DC24 G3M-203PL-4 DC5 G3M-205P-DC5 G3M-205P DC12 G3M-
205P DC24 G3M-205P-4 DC12 G3M-205P-4 DC24 G3M-205P-4 DC5 G3M-205PL-4 DC12 G3M-205PL-4 DC24
G3M-205PL-4 DC5 G3M-202PL DC12 G3M-202PL-UTU DC5 G3M-202P-UTU DC5 G3M-203P-UTU-1-4 DC5
