..
SPECIFICATION
MODEL RQ-65B RQ-65C RQ-65D
DCVOLTAGE
RATEDCURRENT
OUTPUT VOLTAGE ADJ.RANGE
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
ACCURRENT (Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
SAFETY STANDARDS
HARMONICCURRENT
EMSIMMUNITY
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVERVOLTAGE
5V 12V
CH2
-5V
CH3
5V
CH1
15V
CH2
-5V
CH3
12V
CH2
-15V
CH4
24V
CH3
5V
CH1
-12V
CH4
-12V
CH4
6A 2A 0.5A 5A 2A 0.5A 1.5A0.5A 1A4A 0.5A0.5A
0.5~8A 0.2~3A 0~1A 0.5~8A 0.2~3A 0~1A 0.2~3A0~1A
0.1~1.5A
0.5~8A 0~1A0~1A
62.5W 65W 68W
80mVp-p
120mVp-p
80mVp-p
80mVp-p
120mVp-p
80mVp-p
120mVp-p
80mVp-p
180mVp-p
80mVp-p 80mVp-p80mVp-p
CH1:4.75~5.5V CH1:4.75~5.5V CH1:4.75~5.5V
2.0% 5.0% 2.0% +10,-4% 5.0% 8.0%5.0% 2.0% 5.0%5.0%
0.5%
0.5%
1.5%
+7,-5%
0.5% 0.5%
0.5%
1.5% 0.5% 1.5%
6.0%
0.5% 2.0%0.5%
0.5%
0.5%0.5%
3.0% 1.0% 4.0% 1.0% 3.0%1.0% 5.0% 1.0%1.0%
500ms,20ms/230VAC1200ms,30ms/115VACatfullload
60ms/230VAC14ms/115VACatfullload
88~264VAC125~373VDC (Withstand300VACsurgefor5sec.Withoutdamage)
47~63Hz
76% 78%76%
CH1:5.75~6.75V
2A/115VAC1.2A/230VAC
COLDSTART 40A/230VAC
<2mA /240VAC
110~150% ratedoutputpower
Protectiontype:Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
UL60950-1, TUVEN60950-1approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
-25~+70 (Refertooutputloadderatingcurve)
20~90%RH non-condensing
-40~+85 ,10~95%RH
0.03%/ (0~50 )on+5Voutput
10~500Hz,5G10min./1cycle,periodfor 60min.eachalongX, Y,Zaxes
245.5Khrsmin.MIL-HDBK-217F(25 )
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
6. Each output can work within current range. But total output power can't exceed rated output power.
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
FileName:RQ-65-SPEC2010-10-18
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
129*98*38mm(L*W*H)
0.44Kg;30pcs/13.2Kg/0.72CUFT
CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN61000-6-2(EN50082-2),heavyindustrylevel,criteria A
65WQuadOutputSwitchingPowerSupply
Universal AC input / Full range
Protections:Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105 long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty
Features :
RQ-65 series
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC/25 /70%RH
CURRENTRANGE Note.6
RATEDPOWER Note.6
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
LINEREGULATION Note.4
LOADREGULATION Note.5
ENVIRONMENT
PROTECTION
EMICONDUCTION&RADIATION
SAFETY &
EMC
(Note7)
CH1
OUTPUTNUMBER
http://store.iiic.cc/