The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Compact Flash(c) Card Connectors Complies with Compact Flash Association MI20/21 Series (a)Space-saving design Features (b)Suitable for automatic mounting 1. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization and the foot print on the board has been made smaller. (See (a) to the right) 2. Supplied with ground terminals The MI21 Series are furnished with ground terminals. 3. Card ejection mechanism Two point ejection mechanism to assure even card ejection. 4. Designed and packaged for board placement with automatic equipment Headers are designed with a pick up area to accommodate the pick-and -place nozzles of automatic mounting machines. (Patents pending) Receptacles are designed to be mounted on top the board, and automatic mounting is possibble on the specified board. 5. Card ejection mechanism Available in several termination and mouting styles, with and without ejection mechanism, with and without standoffs. 6. Rich variations A rich assortment of variations allows selection of a type to suit the specific card and the equipment to which it will be installed. (1)Suitable cards: Type I , type I/II . (2)Eject button: None, right , left (3)Standoff: 0 mm, 2.2 mm (4)Board mounting type: Standard , reverse O Applications PDA, digital still cameras, etc. C2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors Product Specifications Operating temperature range -20 to +60c (Note 1) Current rating 0.5 A Rating Voltage rating 125 V AC Operating humidity range Item Storage temperature range -10 to +60c (Note 2) Relative humidity 95% or less Storage humidity range (No condensation) Specification -40 to 70% (Note 2) Conditions 1. Insulation resistance 1,000 Mo min. 500 V DC 2. Withstanding voltage No flashover or insulation breakdown. 500 V AC / 1 minute 3. Contact resistance 40 mo max. (initial value) (Note 3) 1 mA 4. Vibration No electrical discontinuity of 100ns or more Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance of 100 Mo min. 96 hours at temperature of 402c and humidity of 90% to 95% 6. Temperature cycle Temperature: -55c for 30 min. --> +5 to 35c within 5 min. 85c for 30 min. --> +5 to 35c within 5 min. for 5 cycles Insulation resistance of 100 Mo min. Change of contact resistance from initial value is 7. Durability (Insertion/withdrawal) 20 mo max. 10000 cycles at 400 to 600 cycles per hour 8. Resistance to Soldering heat Reflow: At the recommended temperature profile Manual soldering: 350c for 3 seconds No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note 3: This does not include the resistance of the conductor . Materials Item Part Material Insulator PPS Contacts Phosphor bronze Insulator PPS Color : Black UL94V-0 Contacts Brass Contact Area : Gold plating Mounting Area : Solder plating --------------- Metal fitting Brass --------------- Applied to eject mechanism Eject fitting Stainless steel --------------- --------------- Ground clip Stainless steel --------------- Applied to MI21 series Receptacle Header Finish Remarks Color : Black UL94V-0 Contact Area : Gold plating Mounting Area : Gold plating --------------- Ordering Information Receptacles Headers MI20 - 50 RD - SF (51) 1 2 3 1 Series name: MI20 2 Number of contacts: 50 3 Connector type 4 Contact form 5 (51): RoHS compliant 4 RD: Receptacle SF: SMT 5 MI20 A - 50 PD R - SF - EJR (71) 1 2 3 4 1 Series name 5 6 Blank : Standard Ml21: for type I and II cards R : 2.2 mm : Reverse 6 Contact type Blank : None A 8 5 Board mounting type Ml20: for type I cards () 2 Stand off type 7 SF: SMT 7 Eject button position 3 Number of contacts: 50 EJR : Right button 4 Connector type EJL PD: Header : Left button Blank : None 8 (71) : RoHS compliant () Can accommodate type II cards only when standard mounting is used and stand off is 0 mm. C3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesCompact have been discontinued, orFlash will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (c) MI20/21 Card Connectors Receptacle Note 1 The coplanarity of the conductor is 0.1 mm Max. Part Number CL No. Number of Contacts Packaging RoHS MI20-50RD-SF(51) 640-7001-0-51 50 Tray YES BPCB mounting pattern C4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors Headers for Type I or II Cards 49 48 1.95 Eject button : None Offset : None Mounting style : Standard mounting No.50 No.38 No.26 No.25 No.13 No.1 30 12.25 18 (20) 43.03 (10) MI20--50PD 0.635 No.50 31.115 No.2 No.26 No.1 No.25 40.4 2.5 (0.8) 1.35 3.8 2.5 t : 0.25 w : 0.25 Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI20-50PD-SF(71) 640-7002-2-71 50 Tray YES BPCB mounting pattern C5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesCompact have been discontinued, orFlash will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (c) MI20/21 Card Connectors Headers for Type I Cards Eject button : None Offset : 2.2 mm Mounting style : Reverse mounting Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI20A-50PDR-SF(71) 640-7003-5-71 50 Tray YES BPCB mounting pattern 440.05 0.1 0 1.3 40.1 43.90.1 50.30.1 22.250.1 28.50.05 2- 370.05 8.25 2.94250.05 4.5 C6 .1 0 0 .6 1 2- 1 0.6350.03 31.1150.05 50-0.40.03 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors Headers for Type I Cards Eject button : Right button Offset : 2.2 mm Mounting style : Standard mounting Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. 3 This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI20A-50PD-SF-EJR(71) 640-7004-8-71 50 Tray YES BPCB mounting pattern C7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesCompact have been discontinued, orFlash will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (c) MI20/21 Card Connectors Headers for Type I Cards Eject button : Left side Offset : 2.2 mm Mounting style : Standard mounting Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. 3 This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI20A-50PD-SF-EJL(71) 640-7005-0-71 50 Tray YES BPCB mounting pattern C8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors Headers for Type I or II Cards Eject button : Right side Offset : 0 mm Mounting style : Standard mounting Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. 3 This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI21-50PD-SF-EJR(71) 640-7107-0-71 50 Tray YES BPCB mounting pattern C9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesCompact have been discontinued, orFlash will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (c) MI20/21 Card Connectors Headers for Type I or II Cards Eject button : Left side Offset : None Mounting style : Standard mounting Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. 3 This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI21-50PD-SF-EJL(71) 640-7108-3-71 50 Tray YES BPCB mounting pattern C10 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors Headers for Type I or II Cards Eject button : None Offset : None Mounting style : Standard mounting Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum Note 4: Dimensions in parentheses ( ) are to be regarded as reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI21-50PD-SF(71) 640-7109-6-71 50 Tray YES BPCB mounting pattern C11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesCompact have been discontinued, orFlash will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (c) MI20/21 Card Connectors Headers for Type I or II Cards Eject button : None Offset : 0 mm Mounting style : Reverse mounting Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI21A-50PDR-SF(71) 640-7106-8-71 50 Tray YES BPCB mounting pattern C12 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors Headers for Type I and II Cards Eject button : Right side Offset : 2.2 mm Mounting style : Standard mounting Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. 3 This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI21A-50PD-SF-EJR(71) 640-7101-4-71 50 Tray YES BPCB mounting pattern C13 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesCompact have been discontinued, orFlash will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (c) MI20/21 Card Connectors Headers for Type I and II Cards Eject button : Left button Offset : 2.2 mm Mounting style : Standard mounting Note 1: This item is a (standard type) header for use with CompactFlash cards. Note 2: The dimensions of mating portion of this product comply with CFA standards. Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure. 3 This part is fixed in the initial condition, but released with a single operation of the ejector. (Amount of actual card ejection: 3.5 mm) Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum. Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI21A-50PD-SF-EJL(71) 640-7102-7-71 50 Tray YES BPCB mounting pattern C14 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors Headers for Type I and II Cards Eject button : None Offset : 2.2 mm Mounting style : Standard mounting Note 1: Coplanarity of all surface mount terminals and components is 0.1. Note 2: Dimensions in parentheses ( ) are reference dimensions. Part Number CL No. Number of Contacts Packaging RoHS MI21A-50PD-SF(71) 640-7103-0-71 50 Tray YES BPCB mounting pattern C15 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesCompact have been discontinued, orFlash will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (c) MI20/21 Card Connectors BTemperature Profile Applicable Conditions Reflow system : IR reflow Solde : Paste type 96.5% Sn / 3.0% Ag / 0.5% Cu Test board Glass epoxy 60mm x 60mm x 1.6 mm Metal mask thickness: 0.15 mm Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount. C16 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose sales representative. (c) MI20/21 SeriesCompact Flashyour Card Connectors BPrecautions for Use 1. Differentiate the side of the card at the time of CF card insertion. This product is furnished with an wrong insertion prevention mechanism which is compliant with CFA standards, but forced wrong insertion of the card may cause damage to the card. 2. Do not move the CF card up and down when it has been partially inserted. It may cause damage to the connector and card. Up CF Card Down 3. The package used for this product is the soft tray. We recommend a check before mounting, since the adjustment may be reqaired depending on the type of mounter. For more detailed information, please contact nearest Hirose account representative. BWashing Conditions This product is a no-wash item, but in the case of washing, please observe the following conditions. 1. Organic Solvent Washing Solvent Room temperature washing Heated washing IPA (Isopropyl alcohol) YES YES HCFC (Hydrochlorofluorocarbon) YES YES 2. Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Be careful that parts are not left with moisture remaining on them. 3. Washing Precautions Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. C17