Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FGH30S150P 1500 V, 30 A Shorted-anode IGBT Features General Description * High Speed Switching Using advanced field stop trench and shorted-anode technology, Fairchild's shorted-anode trench IGBTs offer superior conduction and switching performances for soft switching applications. The device can operate in parallel configuration with exceptional avalanche capability. This device is designed for induction heating and microwave oven. * Low Saturation Voltage: VCE(sat) = 1.85 V @ IC = 30 A * High Input Impedance * RoHS Compliant Applications * Induction Heating, Microwave Oven C E C G G COLLECTOR (FLANGE) Absolute Maximum Ratings T Symbol = 25C unless otherwise noted Description VCES Collector to Emitter Voltage VGES Gate to Emitter Voltage IC C E Ratings Unit 1500 V 25 V Collector Current @ TC = 25oC 60 A Collector Current @ TC = 100oC 30 A 90 A ICM (1) Pulsed Collector Current IF Diode Continuous Forward Current @ TC = 25oC 60 A IF Diode Continuous Forward Current @ TC = 100oC 30 A 500 W PD TJ Maximum Power Dissipation Maximum Power Dissipation o @ TC = 25 C @ TC = 100oC 250 Operating Junction Temperature Tstg Storage Temperature Range TL Maximum Lead Temp. for soldering Purposes, 1/8" from case for 5 seconds W -55 to +175 o -55 to +175 o C C oC 300 Thermal Characteristics Symbol RJC(IGBT) RJA Parameter Thermal Resistance, Junction to Case, Max Thermal Resistance, Junction to Ambient, Max Typ. Max. -- 0.3 o 40 o -- Unit C/W C/W Notes: 1: Limited by Tjmax (c)2015 Fairchild Semiconductor Corporation FGH30S150P Rev. 1.1 1 www.fairchildsemi.com FGH30S150P -- 1500 V, 30 A Shorted-anode IGBT March 2016 Device Marking Device Package Reel Size Tape Width Quantity FGH30S150P FGH30S150P TO-247 - - 30 Electrical Characteristics of the IGBT Symbol Parameter TC = 25C unless otherwise noted Test Conditions Min. Typ. Max. Unit Off Characteristics BVCES Collector to Emitter Breakdown Voltage VGE = 0 V, IC = 1 mA 1500 - - V BVCES TJ Temperature Coefficient of Breakdown Voltage VGE = 0 V, IC = 1 mA - 1.5 - V/oC ICES Collector Cut-Off Current VCE = 1500, VGE = 0V - - 1 mA IGES G-E Leakage Current VGE = VGES, VCE = 0V - - 500 nA IC = 30mA, VCE = VGE On Characteristics VGE(th) VCE(sat) VFM G-E Threshold Voltage Collector to Emitter Saturation Voltage Diode Forward Voltage 4.5 6.0 7.5 V IC = 30A, VGE = 15V TC = 25oC - 1.85 2.4 V IC = 30A, VGE = 15V, TC = 125oC - 2.06 - V IC = 30A, VGE = 15V, TC = 175oC - 2.15 - V IF = 30A, TC = 25oC - 1.61 2.2 V o - 1.96 - V - 3310 - pF - 70 - pF - 55 - pF IF = 30A, TC = 175 C Dynamic Characteristics Cies Input Capacitance Coes Output Capacitance Cres Reverse Transfer Capacitance VCE = 30V, VGE = 0V, f = 1MHz Switching Characcteristics td(on) Turn-On Delay Time - 32 - ns tr Rise Time - 292 - ns td(off) Turn-Off Delay Time - 492 - ns tf Fall Time - 214 - ns Eon Turn-On Switching Loss - 1.16 - mJ Eoff Turn-Off Switching Loss - 0.9 - mJ VCC = 600V, IC = 30A, RG = 10, VGE = 15V, Resistive Load, TC = 25oC Ets Total Switching Loss - 2.06 - mJ td(on) Turn-On Delay Time - 36 - ns tr Rise Time - 336 - ns td(off) Turn-Off Delay Time - 560 - ns tf Fall Time - 520 - ns Eon Turn-On Switching Loss - 1.39 - mJ Eoff Turn-Off Switching Loss - 1.86 - mJ Ets Total Switching Loss - 3.25 - mJ Qg Total Gate Charge - 369 - nC Qge Gate to Emitter Charge - 23.5 - nC Qgc Gate to Collector Charge - 199 - nC (c)2015 Fairchild Semiconductor Corporation FGH30S150P Rev. 1.1 VCC = 600V, IC = 30A, RG = 10, VGE = 15V, Resistive Load, TC = 175oC VCE = 600V, IC = 30A, VGE = 15V 2 www.fairchildsemi.com FGH30S150P -- 1500 V, 30 A Shorted-anode IGBT Package Marking and Ordering Information Figure 1. Typical Output Characteristics o Collector Current, IC [A] TC = 25 C 160 Figure 2. Typical Output Characteristics 200 20V VGE = 17V 12V 80 10V 9V 40 2 4 6 Collector-Emitter Voltage, VCE [V] 120 12V 80 10V 9V 40 8V 7V 0 8 0 Figure 3. Typical Saturation Voltage Characteritics 2 4 6 Collector-Emitter Voltage, VCE [V] 8 Figure 4. Transfer Characteristics 200 200 Common Emitter VCE = 20V Common Emitter VGE = 15V o 160 Collector Current, IC [A] Collector Current, IC [A] 17V 15V 160 8V 7V 0 20V TC = 175 C 120 TC = 25 C o TC = 175 C 120 80 160 TC = 25oC o TC = 175 C 120 80 40 40 0 0 0 2 4 6 Collector-Emitter Voltage, VCE [V] 0 8 Figure 5. Saturation Voltage vs. Case Temperature at Variant Current Level 6 9 12 15 Gate-Emitter Voltage,VGE [V] 20 3 Collector-Emitter Voltage, VCE [V] Common Emitter VGE = 15V 60A 30A 2 IC = 15A 1 25 50 75 100 125 150 175 o Collector-Emitter Case Temperature, TC [ C] (c)2015 Fairchild Semiconductor Corporation FGH30S150P Rev. 1.1 3 18 Figure 6. Saturation Voltage vs. VGE 4 Collector-Emitter Voltage, VCE [V] o 15V Collector Current, IC [A] 200 o TC = 25 C 16 12 30A 8 IC = 15A 60A 4 0 3 Common Emitter 4 8 12 16 Gate-Emitter Voltage, VGE [V] 20 www.fairchildsemi.com FGH30S150P -- 1500 V, 30 A Shorted-anode IGBT Typical Performance Characteristics Figure 7. Saturation Voltage vs. VGE Figure 8. Capacitance Characteristics 10000 20 Common Emitter Cies 16 Capacitance [pF] Collector-Emitter Voltage, VCE [V] o TC = 175 C 12 30A 8 IC = 15A 60A 1000 Coes 100 o TC = 25 C 10 0 4 8 12 16 Gate-Emitter Voltage, VGE [V] 5 10 15 20 25 Collector-Emitter Voltage, VCE [V] 20 Figure 9. Gate Charge Characteristics 200 100 Common Emitter o DC TC = 25 C VCC = 200V Collector Current, Ic [A] 400V 12 9 30 Figure 10. SOA Characteristics 15 Gate-Emitter Voltage, VGE [V] Cres Common Emitter VGE = 0V, f = 1MHz 4 600V 6 3 50s 100s 10 1ms 10 ms 1 *Notes: 0.1 o 1. TC = 25 C o 2. TJ = 175 C 3. Single Pulse 0.01 0 0 80 160 240 Gate Charge, Qg [nC] 320 1 400 Figure 11. Turn-On Characteristics vs Gate Resistance 10 100 1000 3000 Collector-Emitter Voltage, VCE [V] Figure 12. Turn-off Characteristics vs. Gate Resistance 1000 10000 Common Emitter VCC = 600V, VGE = 15V IC = 30A tr Switching Time [ns] Switching Time [ns] o 100 td(on) Common Emitter VCC = 600V, VGE = 15V IC = 30A TC = 25 C o td(off) TC = 175 C 1000 tf o TC = 25 C o TC = 175 C 10 10 20 30 40 50 Gate Resistance, RG [] (c)2015 Fairchild Semiconductor Corporation FGH30S150P Rev. 1.1 60 100 10 70 4 20 30 40 50 Gate Resistance, RG [] 60 70 www.fairchildsemi.com FGH30S150P -- 1500 V, 30 A Shorted-anode IGBT Typical Performance Characteristics Figure 13. Turn-on Characteristics VS. Collector Current Figure 14.Turn-off Characteristics VS. Collector Current 4000 1000 Common Emitter VGE = 15V, RG = 10 o TC = 25 C tf o Switching Time [ns] TC = 175 C tr Switching Time [ns] 1000 100 td(on) td(off) Common Emitter VGE = 15V, RG = 10 100 o TC = 25 C o TC = 175 C 10 10 20 30 40 Collector Current, IC [A] 50 50 10 60 Figure 15. Switching Loss VS. Gate Resistance 20 30 40 50 Collector Current, IC [A] 60 Figure 16. Switching Loss VS. Collector Current 5 10 Common Emitter VCC = 600V, VGE = 15V IC = 30A Eon Switching Loss [mJ] Switching Loss [mJ] o TC = 25 C o TC = 175 C Eon Eoff 1 1 Eoff Common Emitter VGE = 15V, RG = 10 o TC = 25 C o TC = 175 C 0.5 10 20 30 40 50 Gate Resistance, RG [] 0.05 10 60 30 40 50 60 Collector Current, IC [A] Figure 17. Turn off Switching SOA Characteristics Figure 18. Forward Characteristics 100 60 o Forward Current, IF [A] Collector Current, IC [A] 20 10 Safe Operating Area o 0.5 10 100 1000 Collector-Emitter Voltage, VCE [V] FGH30S150P Rev. 1.1 o TC = 25 C TC = 175 C 1 (c)2015 Fairchild Semiconductor Corporation o TJ = 175 C 10 1 o VGE = 15V, TC = 175 C 1 TJ = 25 C 0 5 1 2 Forward Voltage, VF [V] 3 www.fairchildsemi.com FGH30S150P -- 1500 V, 30 A Shorted-anode IGBT Typical Performance Characteristics FGH30S150P -- 1500 V, 30 A Shorted-anode IGBT Figure 19.. Transient Thermal Impedance of IGBT Thermal Response [Zthjc] 0.4 0.5 0.1 0.2 0.1 0.05 PDM 0.02 t1 t2 Duty Factor, D = t1/t2 Peak Tj = Pdm x Zthjc + TC 0.01 0.01 single pulse 7E-3 1E-5 1E-4 1E-3 0.01 0.1 1 10 Rectangular Pulse Duration [sec] (c)2015 Fairchild Semiconductor Corporation FGH30S150P Rev. 1.1 6 www.fairchildsemi.com 4.82 E 4.58 15.87 E 15.37 A 12.81 E 4.13 3.53 6.85 6.61 5.58 E 5.34 5.20 4.96 B 3.65 E 3.51 M 0.254 B A M 1.35 0.51 20.82 E 20.32 1 2 3 3 1.87 1.53 (2X) 3.93 E 3.69 13.08 MIN 16.25 E 15.75 1.60 2.77 2.43 0.71 0.51 5.56 2.66 2.29 1.35 1.17 11.12 0.254 M B A M NOTES: UNLESS OTHERWISE SPECIFIED. A. PACKAGE REFERENCE: JEDEC TO-247, ISSUE E, VARIATION AB, DATED JUNE, 2004. B. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DRAWING CONFORMS TO ASME Y14.5 - 1994 E DOES NOT COMPLY JEDEC STANDARD VALUE F. DRAWING FILENAME: MKT-TO247A03_REV04 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com