VentoFlex Flexible Modular Lighting Tile Bend the Rules of Lighting Design with VentoFlex Tiles For architects and lighting designers with the highest standards, VCC VentoFlex modular lighting system opens up countless ways to make an impact. Featuring a flexible PC board, VentoFlex delivers seamless backlighting, even in challenging interior spaces. 1 VentoFlex Tile 2 Ventoflex Power Cable 3 VentoFlex Bridge Cable 4 VentoFlex Jumper Cable 5 Driver (Not Included) 4 1 3 2 5 Features Connect up to 10 or 15, 12"x12" VentoFlex LED tiles on a Class 2 LED Driver Dimmable to 1% using any 0-10V/DALI signal LEDs: 144 LuxeonTM CRI>90 Color Temperatures: 2200K, 2700K, 3000K, 3500K, 4000K, 5000K, 5700K Viewing Angle: 140 degrees Luminous Flux = 864lm per square foot Luminous Efficacy = 100 lumens/watt (8.6W per tile) Material: Flexible Copper Clad Laminate (FCCL) PC board Mounting method: Staples/Nail/Screw/Double Sided tape Tool-less snap connectors Modular Connection: Snap buttons, jumper, or bridge cables Operating temperature -13F - 140F Suitable for dry and damp locations TM-21 L70 > 60,000 hr Class 2 input only 105C maximum hot spot temperature (Tc) Works with any 48VDC output LED Driver 5 Year warranty VentoFlex | 12/18 Rev 1 1 OF 5 VentoFlex No hot spots, just unstoppable versatility. VentoFlex Flexible Copper Clad Laminate (FCCL) tiles can be mounted directly to most any non-conductive interior surface with no requirement for a heat sink. Featuring 90 CRI LuxeonTM LEDs in a wide range color temperatures, VentoFlex tiles provide seamless uniform illumination of luminous surfaces at setback distances as low as 2 inches. Versatile Customizable Modular Lighting design without compromise Cut. Shape. Wow. Impact that goes on and on Ambient lighting is all about creating the right mood. VentoFlex helps designers set the exact tone and aesthetic they intended. With VentoFlex, lighting design is no longer limited by flat surfaces -- the flexible tiles can contour to fit most any curved surface up to 90 degrees and beyond. Available in 12"x12" tiles, these innovative LED tiles can be cut and formed around any design element, including rounded corners and tight spaces without taking up much room at all -- 0.15" (3.81mm). A pair of scissors is the only tool required to cut VentoFlex tiles to the size and shape you desire. VentoFlex can link up to 10 or 15, 12" x 12" tiles to one Class 2 LED Driver, all on the same 0-10V or DALI dimmer. That's 1440 or 2160 square inches of versatile lighting power! When connecting tiles together, the cables don't have to physically touch each other, enabling even more design flexibility. Applications Create awe-inspiring illumination for: Ceilings Backlit signs Museums and galleries Restaurants 3D installations Bars and countertops Lobbies Retail spaces Decorative walls and panels VentoFlex | 12/18 Rev 1 2 OF 5 VentoFlex Overview Specifications Power Location Indoor, dry and damp location only Operating Voltage 48 VDC Electrical Connections Tool-less snap connectors Base Material Flexible polymide Mounting Mount to any surface Input Voltage 48VDC Dimming Dimming is possible depending on the driver Wattage 5.8watt, 8.6watt Efficacy 120lm/W, 100lm/W (See efficacy table) LED Specifications Photometric Color Rendering Index (CRI) >90, R9>50 Lumen Maintenance TM-21 L70 > 60,000 hr Viewing angle 140 degree viewing angle Light output (lm) per sheet 691, 864 Color Temp 2200K, 2700K, 3000K, 3500K, 4000K, 5000K, 5700K Efficacy Table 2200K 2700K 3000K 3500K 4000K 5000K 5700K Lumen (6w) 518 576 576 634 662 662 662 Lumen (9w) 648 720 720 792 828 828 828 Efficacy (6W) 90 100 100 110 115 115 115 Efficacy (6W) 75 83 83 92 96 96 96 Wattage (6W) 5.76 Wattage (9W) 8.64 VentoFlex | 12/18 Rev 1 2 OF 5 VentoFlex Ordering Instructions VentoFlex Tile Product Category Type of Cut Cut Size Wattage LED Type Color Temperature VFT S 12N 06 S 22K VentoFlex VFT S H Square Horizontal Part Number VFTS12N06S35K 12N 12" x 12" 6W 9W 06 09 S Static White 22K 27K 30K 35K 40K 50K 57K Description VentoFlex Square 12" 6W Static White 3500 Kelvin 2200 2700 3000 3500 4000 5000 5700 Kelvin Kelvin Kelvin Kelvin Kelvin Kelvin Kelvin NOTE: 06W: Up to 15 tiles with Class 2 LED Driver | 09W: Up to 10 tiles with Class 2 LED Driver Square Tile Horizontal Tile VentoFlex Cable Product Category Accessory LED Type Polarity Length VFT PC S P01 02FT VFT VentoFlex PC JC BC Part Number VFTPCSP0110FT Power Cable Can be + or - S Static White P01 Positive (+) Red PC/BC Jumper Cable N10 Negative (-) Black Bridge Cable N04 No Polarity White No Polarity Can be + or - PC/BC 02FT 03FT 10FT 20FT 2 ft** 3 ft** 10 ft* 20 ft* Description VentoFlex Power Cable Static White Red 10ft * Power cable (VFTPCSP01 and VFTPCSP01) are only available 10 or 20 ft cable length ** Jumper and Bridge cable (VFTJCSN04, VFTBCSP01 and VFTBCSN10) are only available 2 or 3 ft cable length Power Cable Jumper Cable Bridge Cable VentoFlex | 12/18 Rev 1 3 OF 5 VentoFlex Installation Instructions Trimming Tiles VentoFlex tiles may be cut with scissors, shears or knife at specific lengths unique to each tile design ONLY cut VentoFlex tiles along the dotted lines indicated on the tile Clean cut Square Tile Overcut Horizontal Tile Do not cut out this area Do not cut this area P4.0in x 3 = 12.0in 12.0in 4.0in P1.0in X 8 =8.0in P1.0in X 6 = 6.0in 12.0in 12.0in 6.0in 9.0in 6.0in 3.0in VentoFlex | 12/18 Rev 1 4 OF 5 VentoFlex Installation Instructions Handling Instructions Avoid creasing or repeating bending of VentoFlex tiles. VentoFlex tiles are flexible. Do not bend sheets to a diameter of less than 2 inches (50.8 mm) Do not scrape, rub, or excessively wipe the conductive area between the borders of the tile Handle sheets only by the borders Only mount sheets at mounting locations indicated on the tile - DO NOT puncture the active area of the tile Fasteners should be appropriate for the mounting surface Mount only to non-conductive interior surfaces If using foam tape, apply only along the borders of each tile Warranty This product has a warranty period of 5 Years. Warranties may be available on certain products as indicated in the product description. Warranties are valid from the date of purchase.The warranty is invalid in the case of improper use, installation, tampering, removal of the Q.C. date label or installation in an improper working environment or installation. Should this product fail during the warranty period it will be replaced free of charge, subject to the correct installation of the original product and subsequent return of the faulty unit. VCC does not accept responsibility for any installation costs associated with the replacement of this product and VCC reserves the right to alter specifications without prior notice. VentoFlex | 12/18 Rev 1 5 OF 5