1 OF 5
Features
Connect up to 10 or 15, 12"x12" VentoFlex LED tiles on a Class 2 LED Driver
Dimmable to 1% using any 0-10V/DALI signal
LEDs: 144 Luxeon™ CRI>90
Color Temperatures: 2200K, 2700K, 3000K, 3500K, 4000K, 5000K, 5700K
Viewing Angle: 140 degrees
Luminous Flux = 864lm per square foot
Luminous Efficacy = 100 lumens/watt (8.6W per tile)
Material: Flexible Copper Clad Laminate (FCCL) PC board
Mounting method: Staples/Nail/Screw/Double Sided tape
Tool-less snap connectors
Modular Connection: Snap buttons, jumper, or bridge cables
Operating temperature -13°F - 140°F
Suitable for dry and damp locations
TM-21 L70 > 60,000 hr
Class 2 input only
105˚C maximum hot spot temperature (Tc)
Works with any 48VDC output LED Driver
5 Year warranty
Bend the Rules of Lighting Design with VentoFlex Tiles
VentoFlex
3
4
1
2
5
1VentoFlex Tile
2Ventoflex Power Cable
3VentoFlex Bridge Cable
4VentoFlex Jumper Cable
5Driver (Not Included)
For architects and lighting designers
with the highest standards, VCC
VentoFlex modular lighting system
opens up countless ways to make
an impact. Featuring a flexible PC
board, VentoFlex delivers seamless
backlighting, even in challenging
interior spaces.
Flexible Modular Lighting Tile
VentoFlex | 12/18 Rev 1
2 OF 5
Lighting design without compromise
Versatile
Ambient lighting is all about creating
the right mood. VentoFlex helps
designers set the exact tone and
aesthetic they intended. With
VentoFlex, lighting design is no
longer limited by flat surfaces — the
flexible tiles can contour to fit most
any curved surface up to 90 degrees
and beyond.
Cut. Shape. Wow.
Customizable
Available in 12"x12" tiles, these
innovative LED tiles can be cut and
formed around any design element,
including rounded corners and tight
spaces without taking up much
room at all — 0.15" (3.81mm). A
pair of scissors is the only tool
required to cut VentoFlex tiles to the
size and shape you desire.
Impact that goes on and on
Modular
VentoFlex can link up to 10 or 15,
12” x 12” tiles to one Class 2 LED
Driver, all on the same 0-10V or DALI
dimmer. That’s 1440 or 2160 square
inches of versatile lighting power!
When connecting tiles together, the
cables don’t have to physically touch
each other, enabling even more
design flexibility.
No hot spots, just unstoppable versatility.
VentoFlex
VentoFlex Flexible Copper Clad Laminate (FCCL) tiles can be mounted directly to most any non-conductive interior surface with
no requirement for a heat sink. Featuring 90 CRI Luxeon™ LEDs in a wide range color temperatures, VentoFlex tiles provide
seamless uniform illumination of luminous surfaces at setback distances as low as 2 inches.
VentoFlex | 12/18 Rev 1
Create awe-inspiring illumination for:
Applications
Ceilings
Backlit signs
Museums and galleries
Restaurants
3D installations
Bars and countertops
Lobbies
Retail spaces
Decorative walls and panels
Efficacy Table
2200K
518
648
90
75
5.76
8.64
2700K
576
720
100
83
3000K
576
720
100
83
3500K
634
792
110
92
4000K
662
828
115
96
5000K
662
828
115
96
5700K
662
828
115
96
Lumen (6w)
Lumen (9w)
Efficacy (6W)
Efficacy (6W)
Wattage (6W)
Wattage (9W)
Overview
Location
Indoor, dry and damp location only
Operating Voltage
48 VDC
Electrical Connections
Tool-less snap connectors
Base Material
Flexible polymide
Mounting
Mount to any surface
Specifications
Light output (lm) per sheet
691, 864
Color Temp
2200K, 2700K, 3000K, 3500K, 4000K, 5000K, 5700K
Photometric
Color Rendering Index (CRI)
>90, R9>50
Lumen Maintenance
TM-21 L70 > 60,000 hr
Viewing angle
140 degree viewing angle
LED Specifications
Input Voltage
48VDC
Dimming
Dimming is possible depending on the driver
Wattage
5.8watt, 8.6watt
Efficacy
120lm/W, 100lm/W (See efficacy table)
Power
2 OF 5
VentoFlex
VentoFlex | 12/18 Rev 1
Power Cable Jumper Cable Bridge Cable
SStatic White
Ordering Instructions
VentoFlex Tile
VFT
Product Category
S
Type of Cut
12N
Cut Size
06
Wattage
S
LED Type
22K
Color Temperature
SStatic White06 6W
09 9W
12N 12" x 12"SSquare
HHorizontal
VFT VentoFlex
57K 5700 Kelvin
40K 4000 Kelvin
50K 5000 Kelvin
35K 3500 Kelvin
27K 2700 Kelvin
30K 3000 Kelvin
22K 2200 Kelvin
VentoFlex Cable
VFT
Product Category
PC
Accessory
S
LED Type
P01
Polarity
02FT
Length
VFT VentoFlex
20FT 20 ft*
03FT 3 ft**
10FT 10 ft*
02FT 2 ft**
3 OF 5
VentoFlex
P01 Positive (+) Red
N10 Negative (-) Black
PC/BC
PC/BC
N04 No Polarity White
PC Power Cable
JC Jumper Cable
BC Bridge Cable
Can be + or -
No Polarity
Can be + or -
Part Number Description
VentoFlex Square 12" 6W Static White 3500 KelvinVFTS12N06S35K
Part Number Description
VentoFlex Power Cable Static White Red 10ftVFTPCSP0110FT
* Power cable (VFTPCSP01 and VFTPCSP01) are only available 10 or 20 ft cable length
** Jumper and Bridge cable (VFTJCSN04, VFTBCSP01 and VFTBCSN10) are only available 2 or 3 ft cable length
NOTE: 06W: Up to 15 tiles with Class 2 LED Driver | 09W: Up to 10 tiles with Class 2 LED Driver
VentoFlex | 12/18 Rev 1
Square Tile Horizontal Tile
Trimming Tiles
VentoFlex tiles may be cut with scissors, shears or knife at specific lengths unique to each tile design
ONLY cut VentoFlex tiles along the dotted lines indicated on the tile
12.0in
6.0in
12.0in
4.0in
P1.0in X 8 =8.0in
P1.0in X 6 = 6.0in
12.0in
P4.0in x 3 = 12.0in
3.0in
6.0in
9.0in
Do not cut this area
Installation Instructions
Do not cut out this area
Square Tile Horizontal Tile
4 OF 5
VentoFlex
VentoFlex | 12/18 Rev 1
Clean cut Overcut
Avoid creasing or repeating bending of VentoFlex tiles.
VentoFlex tiles are flexible. Do not bend sheets to a diameter of less than 2 inches (50.8 mm)
Do not scrape, rub, or excessively wipe the conductive area between the borders of the tile
Handle sheets only by the borders
Only mount sheets at mounting locations indicated on the tile - DO NOT puncture the active area of the tile
Fasteners should be appropriate for the mounting surface
Mount only to non-conductive interior surfaces
If using foam tape, apply only along the borders of each tile
Handling Instructions
Installation Instructions
Warranty
This product has a warranty period of 5 Years. Warranties may be available on certain products as indicated
in the product description. Warranties are valid from the date of purchase.The warranty is invalid in the case
of improper use, installation, tampering, removal of the Q.C. date label or installation in an improper working
environment or installation. Should this product fail during the warranty period it will be replaced free of
charge, subject to the correct installation of the original product and subsequent return of the faulty unit.
VCC does not accept responsibility for any installation costs associated with the replacement of this
product and VCC reserves the right to alter specifications without prior notice.
5 OF 5
VentoFlex
VentoFlex | 12/18 Rev 1
