SPECIFICATION
(Reference sheet)
Supplier : Samsung electro-mechanics Samsung P/N : CL10Y474MR5NJND
Product : Multi-layer Ceramic Capacitor Description : CAP, 470㎋, 4V, ±20%, X7S, 0603
CL 10 Y474 M R 5 N J N D
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
①Series Samsung Multi-layer Ceramic Capacitor
②Size 0603 (inch code) L: 1.60 ± 0.10 ㎜W: ± 0.10 ㎜
③Dielectric X7S ⑧Inner electrode
④Capacitance 470 ㎋Termination
⑤Capacitance ±20 % Plating (Pb Free)
tolerance ⑨Product SLIC
⑥Rated Voltage 4V ⑩Special Reserved for future use
⑦Thickness 0.50 +0.05/-0.1 ㎜⑪Packaging Cardboard Type, 13" reel
B. Structure and Dimensions
BW SW P
CL10Y474MR5NJND
1.60±0.10 0.80±0.10 0.5 +0.05/-0.1 0.25±0.10 0.15±0.10 0.40±0.10
A. Samsung Part Number
0.80
Ni
Cu
Sn 100%
Samsung P/N
Dimension(㎜)
LW T
C. Samsung Reliablility Test and Judgement Condition
Capacitance Within specified tolerance 1㎑ ±10% / 0.5±0.1Vrms
Tan δ (DF) 0.12 max.
Insulation 10,000Mohm or 50Mohm×㎌Rated Voltage 60~120 sec.
Resistance Whichever is smaller
Appearance No abnormal exterior appearance Microscope (×10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature X7S
Characteristics (From -55℃ to 125℃, Capacitance change should be within ±22%)
Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : within ±12.5% Bending to the limit (1㎜)
with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to Capacitance change : within ±7.5% Solder pot : 270±5℃, 10±1sec.
Soldering heat Tan δ, IR : initial spec.
Vibration Test Capacitance change : within ±20% Amplitude : 1.5mm
Tan δ, IR : initial spec. From 10㎐ to 55㎐ (return : 1min.)
2hours × 3 direction (x, y, z)
Moisture Capacitance change : within ±12.5% With rated voltage
Resistance Tan δ : 0.2 max 40±2℃, 90~95%RH, 500+12/-0hrs
IR : 500Mohm or 12.5Mohm × ㎌
Whichever is smaller
High Temperature Capacitance change : within ±12.5% Wit
h
of the rated voltage
Resistance Tan δ : 0.2 max Max. operating temperature
IR : 1,000Mohm or 25Mohm × ㎌1,000+48/-0hrs
Whichever is smaller
Temperature Capacitance change : within ±12.5% 1 cycle condition
Cycling Tan δ, IR : initial spec. Min. operating temperature →25℃
→Max. operating temperature →25℃
5 cycle test
※ The reliability test condition can be replaced by the corresponding accelerated test condition.
D. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260±5℃, 30sec. )
Product specifications included in the specifications are effective as of March 1, 2013.
Please be advised that they are standard product specifications for reference only.
We may change, modify or discontinue the product specifications without notice at any time.
So, you need to approve the product specifications before placing an order.
Should you have any question regarding the product specifications,
please contact our sales personnel or application engineers.
Judgement Test condition
250%
150%
- Caution of Application -
Disclaimer
The products listed as follows are NOT designed and manufactured for any use and applications set
forth below.
Please note that any misuse of the products deviating from products specifications or information
provided in this Spec sheet may cause serious property damages or personal injury.
① Aerospace/Aviation equipment
② Automotive of Transportation equipment (vehicles，trains，ships，etc)
③ Military equipment
④ Atomic energy-related equipment
⑤ Undersea equipment
⑥ Any other applications with the same as or similar complexity or reliability to the applications
Limitation
Please contact us with usage environment information such as voltage, current, temperature, or other
special conditions before using our products for the applications listed below. The below application
conditions require especially high reliability products to prevent defects that may directly cause
damages or loss to third party's life, body or property.
If you have any questions regarding this 'Limitation'，you should first contact our sales
personnel or application engineers.
① Medical equipment
② Disaster prevention/crime prevention equipment
③ Power plant control equipment
④ Traffic signal equipment
⑤ Data-processing equipment
⑥ Electric heating apparatus，burning equipment
⑦ Safety equipment
⑧ Any other applications with the same as or similar complexity or reliability to the applications
