98
The RE series was developed as a reliable,
low-cost, crimp style connector for
connecting wires to printed circuit boards.
It is well suited for completing the internal
connections of office automation
equipment, such as personal computers,
office computers, and their peripheral
devices.
Features––––––––––––––––––––––––
• Reliable, yet low in cost
Our unique, double-leaf spring contact withstands the stresses
caused by repeated mating and unmating and ensures a stable
high-pressure connection. The contacts and headers are
selectively gold-plated to reduce costs. Depending on the
application, fully tin-plated contacts and headers are available to
further reduce costs.
• Space-saving, high-density design
Measuring only 16.54mm (.651") in height and 2.54mm (.100")
thick when mounted on a printed circuit board, the RE
connector and header require less mounting space and facilitate
high-density circuit design.
• Easy contact insertion
A slight force is all that is needed to insert the contacts into the
housing, because the housing has lances. The position of the
contacts in the housing can be visually checked. This facilitates
insertion of the contacts in the housing.
• It can be cut to any length to provide a header
with any number of circuits
Notches are provided on the insulator that allow it to be cut to
any length without using special tools.
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 250V AC, DC
• Temperature range: (including tempertatuer rise in applying
electrical current)
-55˚C to +105 ˚C(gold plated)
-55˚C to +85˚C(tin-plated)
• Contact resistance: Initial value/15m Ω max.
After environmental testing/30m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,500V AC/minute
• Applicable wire: AWG #30 to #24
• Applicable PC board thickness: 1.2 to 1.6mm(.047" to .063")
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
RE CONNECTOR•HEADER
Disconnectable Crimp style connectors and headers
2.54mm
(.100") pitch
Crimp
99
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
6.1(.240)
1.6
(.063)
3.6(.142)
1.5
(.059)
1.2
(.047)
11.5(.453)
Model No. Applicable wire
mm2AWG #
Insulation O.D.
mm(in.)
Finish Q'ty /
reel
Material
RF-SC2210
RF-SC2290
0.05 to 0.22 30 to 24 0.9 to 1.5
(.035 to .059)
Phosphor bronze
Nicel-undercoated,
Mating section: Gold-plated
Crimp section: Tin/lead-plated
Copper-undercoated, tin-plated
10,000
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
B
2.54
(.100)
14.0(.551)
A
2.54
(.100)
1.27
(.050)
JST 8 92
Model No. Dimensions mm(in.)
Cir-
cuits AB
Q'ty /
box
Material
2
4
5
8
9
RE-02
RE-04
RE-05
RE-08
RE-09
2.54(.100)
7.62(.300)
10.16(.400)
17.78(.700)
20.32(.800)
5.08(.200)
10.16(.400)
12.70(.500)
20.32(.800)
22.86(.900)
PBT, UL94V-0, natural (black)
1,000
1,000
1,000
500
500
RE CONNECTOR•HEADER
Header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(.025)
0.64 (.100)
2.54 (.050)
1.27 (.105)
2.66
6.0(.236)(.100)
2.54
(.118)
3.0
[ ]
Gold-plated area
4.0(.157)
(.025)
0.64 (.100)
2.54 (.050)
1.27 (.105)
2.66
6.0(.236)(.100)
2.54
[ ]
3.0
(.118)
1.52
(.060) min.
Model No. Material
Wafer Post Finish
*RE-H(*)
2TD-1130
RE-H(*)
2TD-1190
PBT,
UL94V-0,
black Brass
Nickel-undercoated,
gold-plated
Copper-undercoated,
tin/lead-plated
Model No. Material
RE-H(*)
2SD-1110
Post Finish
Wafer
RE-H(*)
2SD-1190
PBT,
UL94V-0,
black Brass
Nickel-undercoated,
Mating section: Gold-plated
Solder tail: Tin/lead-plated
Copper-undercoated, tin-plated
tin/lead-plated
Top entry type
Side entry type
Top entry type
Side entry type
Note:
1. A two-digit number (01 to 30) representing the number of circuits
should be inserted in (* ).
Determine the number depending on the number of circuits of the
housing or header.
2. Contact JST for special products.
100
Polarizing key ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.5
(.059)
4.2(.165)
0.8
(.031)
Model No.
Material
Q'ty / bag
PK-RF-1
PBT, UL94V-0, natural (white)
2,000
Polarizing key: The polarizing key in the housing prevents misinsertion of the
connector to the header.
Note: Not UL approved nor CSA certified.
Note:
1. Tolerances are non-cumulatinve: ±0.05mm(±.002") for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
PC board layout (viewed from soldering side) and Assembly layout –––––––––––––––––––
.100 ± .002
( )
2.54 ± 0.05 min.
(.050)
1.27
min.
(.057)
1.46
(.035 )dia.
+.004
0
0.9 +0.1
0
[16.6(.654)]
[ ]2.66(.105)
3.0(.118)
min.
(.050)
1.27
14.0(.551)
4.06
(.160)
4.1(.161)min.
2.9
(.114)
3.0
(.118)
.100 ± .002
( )
2.54 ± 0.05
(.035 )dia.
+.004
0
0.9+0.1
0
Top entry type Side entry type
RE CONNECTOR•HEADER
Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
RF-SC22** APLMK RF-SC22 APLNC RF-SC22 – – –
