Data Sheet PS2911-1 R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 HIGH CTR, 4-PIN ULTRA SMALL PACKAGE FLAT-LEAD PHOTOCOUPLER DESCRIPTION The PS2911-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor in one package for high density mounting applications. An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30% compared with the PS28xx series. FEATURES <R> Ultra small flat-lead package (4.6 (L) 2.5 (W) 2.1 (H) mm) High current transfer ratio (CTR = 200% TYP. @ IF = 1 mA, VCE = 5 V) High isolation voltage (BV = 2 500 Vr.m.s.) Ordering number of taping product: PS2911-1-F3: 3 500 pcs/reel Safety standards UL approved: UL1577, Single protection BSI approved: BS EN 62368-1, Supplementary insulation VDE approved: DIN EN 60747-5-5 (Option) PIN CONNECTION (Top View) 4 1. Anode 2. Cathode 3. Emitter 4. Collector 1 APPLICATIONS 3 2 DC/DC converter Modem/PC card The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 1 of 12 PS2911-1e PACKAGE DIMENSIONS (UNIT: mm) 2.50.3 4.60.2 R 2 5.00.2 0.15 +0.1 -0.05 2.1 MAX. 1 4.1 MIN. 3 4 0.40.1 0.20.1 1.27 MARKING EXAMPLE Ni/Pd/Au PLATING Last number of type No. : 11 11 *1 R Company initial (Engraved R) 601 No. 1 pin mark (Nicked corner) Assembly lot 3 01 Week assembled Year Assembled (Last 1 Digit) *1 Bar : Pb-Free PHOTOCOUPLER CONSTRUCTION Parameter Air Distance Creepage Distance Isolation Distance R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 MIN. 4 mm 4 mm 0.4 mm Page 2 of 12 PS2911-1e <R> ORDERING INFORMATION Part Number PS2911-1 PS2911-1-F3 PS2911-1-V Order Number Solder Plating Specification PS2911-1-AX Pb-Free 50 pcs (Tape 50 pcs cut) Standard products PS2911-1-F3AX PS2911-1-V-AX (Ni/Pd/Au) Embossed Tape 3 500 pcs/reel 50 pcs (Tape 50 pcs cut) (UL, BSI approved) PS2911-1-V-F3 PS2911-1-V-F3AX Note: Packing Style Embossed Tape 3 500 pcs/reel Safety Standard Approval Application Part Number*1 PS2911-1 UL, BSI approved DIN EN 60747-5-5 (VDE 0884-5) approved (Option) *1. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Diode Detector Parameter Forward Current Forward Current Derating Peak Forward Current *1 IFP Ratings 50 0.5 0.5 Power Dissipation PD 60 mW VR VCEO VECO IC PC/C PC 6 40 5 40 1.2 120 V V V mA mW/C mW BV 2 500 Vr.m.s. PT TA Tstg 160 55 to +100 55 to +150 mW C C Reverse Voltage Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 Total Power Dissipation Operating Ambient Temperature Storage Temperature Symbol IF IF/C Unit mA mA/C A Notes: *1. PW = 100 s, Duty Cycle = 1% *2. AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 3 of 12 PS2911-1e ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Forward Voltage Reverse Current Terminal Capacitance Transistor Collector to Emitter Dark Current ICEO Conditions IF = 1 mA VR = 5 V V = 0 V, f = 1 MHz IF = 0 mA, VCE = 40 V Coupled Current Transfer Ratio (IC/IF) *1 CTR IF = 1 mA, VCE = 5 V Collector Saturation Voltage Isolation Resistance Isolation Capacitance VCE(SAT) Diode Rise Time *2 Fall Time Symbol VF IR Ct RI-O CI-O tr *2 MIN. 0.9 100 ton MAX. 1.3 5 100 Unit V A pF nA 200 400 % 0.13 0.3 V 15 IF = 1 mA, IC = 0.2 mA 0.4 pF 5 s 1011 VI-O = 1 kVDC V = 0 V, f = 1 MHz VCC = 5 V, IC = 2 mA, RL = 100 10 tf Turn-on Time *2 TYP. 1.1 VCC = 5 V, IF = 1 mA, RL = 5 k s 40 Storage Time *2 ts 10 Turn-off Time *2 toff 120 Notes: *1. CTR rank N : 100 to 400 (%) K : 200 to 400 (%) L : 150 to 300 (%) M : 100 to 200 (%) *2. Test circuit for switching time Pulse Input VCC Input PW = 100 s Duty cycle = 1/10 ton td IF 90% IC In monitor VOUT 50 Output RL = 100 /5 k tr R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 toff ts tf 10% Page 4 of 12 PS2911-1e TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Maximum Forward Current IF (mA) 80 60 40 0.5 mA/C 20 50 25 0 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 75 100 140 120 100 80 60 40 20 0 75 100 FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 20 Collector Current IC (mA) TA = +100C +60C +25C 1 0C -25C -50C 0.1 CTR = 200% IF = 5 mA 16 14 12 10 8 2 mA 6 4 1 mA 0.5 mA 2 0.01 0.0 0.5 1.0 1.5 0 2.0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 000 10 CTR = 200% 5 mA 2 mA Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 125 Ambient Temperature TA (C) 18 Forward Current IF (mA) 50 Ambient Temperature TA (C) 100 10 25 1 000 VCE = 20 V 40 V 100 10 1 -25 0 25 50 75 100 Ambient Temperature TA (C) 1 mA 1 IF = 0.5 mA 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 5 of 12 PS2911-1e CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 500 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25C, IF = 1 mA, VCE = 5 V 0.2 0.0 -50 0 -25 25 50 75 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE VCE = 5 V, n=3 400 Sample A B C 300 200 100 0 0.1 100 1 100 10 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 10 000 1 000 100 0 toff Normalized Gain Gv Switching Time t ( s) IF = 1 mA, VCC = 5 V, CTR = 200% ts ton 10 -5 100 RL = 1 k -10 300 -15 -20 1 1k 10k 100 k 1 000 k Load Resistance RL () -25 0.1 1 10 100 1 000 Frequency f (kHz) Remark The graphs indicate nominal characteristics. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 6 of 12 PS2911-1e TAPING SPECIFICATIONS (UNIT: mm) 1.750.1 Outline and Dimensions (Tape) 5.50.05 1.5+0.1 -0 2.9 MAX. 5.30.1 4.00.1 12.00.2 2.00.05 0.3 1.550.05 2.40.1 2.90.1 4.00.1 Tape Direction PS2911-1-F3 R R R R Outline and Dimensions (Reel) 2.00.5 3302.0 2.00.5 13.00.2 1001.0 21.00.8 <R> 13.51.0 Packing: 3 500 pcs/reel R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 7 of 12 PS2911-1e RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 5.7 4.7 4.14 0.6 (0.35) 1.27 0.8 ( ) : Reference value 24-R0.1 Remark This drawing is considered to meet air and outer creepage distance 4.0 mm minimum. All dimensions in this figure must be evaluated before use. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 8 of 12 PS2911-1e NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% or less is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% or less is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) 350C or below * Time (each pin) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% or less is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 9 of 12 PS2911-1e 2. Cautions Regarding Noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collectoremitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 10 of 12 PS2911-1e SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.6 UIORM, Pd 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM, Pd 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) Material group (DIN EN 60664-1 VDE0110 Part 1) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Spec. Unit 55/100/21 UIORM Upr 570 912 Vpeak Vpeak Upr 1 068 Vpeak UTR 4 000 2 Vpeak CTI 175 Tstg TA III a -55 to +150 -55 to +100 C Ris MIN. Ris MIN. 1012 1011 Tsi Isi Psi 150 300 500 C mA mW Ris MIN. 109 C Page 11 of 12 PS2911-1e Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. R08DS0110EJ0400 Rev.4.00 Jan 21, 2016 Page 12 of 12 Revision History PS2911-1 Data Sheet Description Rev. Date 2.00 3.00 May 25, 2006 May 24, 2013 4.00 Jan 21, 2016 Page Throughout p.1 p.2 p.3 p.4 p.7 p.9 p.11 p.1 p.3 p.7 Summary First edition issued Renesas format is applied to this data sheet. Modification of FEATURES Modification of PACKAGE DIMENSIONS Modification of MARKING EXAMPLE Modification of ORDERING INFORMATION Modification of ELECTRICAL CHARACTERISTICS Modification of TAPING SPECIFICATIONS Modification of NOTES ON HANDLING Addition of SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Update of FEATURES - Safety standards Modification of ORDERING INFORMATION Modification of TAPING SPECIFICATIONS All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. California Eastern Laboratories, Inc. 4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A. Tel: +1-408-919-2500, Fax: +1-408-988-0279 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333 Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HAL II Stage, Indiranagar, Bangalore, India Tel: +91-80-67208700, Fax: +91-80-67208777 Renesas Electronics Korea Co., Ltd. 12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2016 Renesas Electronics Corporation. All rights reserved. Colophon 5.0