25W Single Output AC Dimmable LED Power Supply PCD-25 series IP42 IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL R-41027766 SPECIFICATION MODEL RATED CURRENT PCD-25-350 PCD-25-700 PCD-25-1050 PCD-25-1400 350mA 700mA 1050mA 1400mA 24 ~ 36V 16 ~ 24V 12 ~ 18V OPERATING VOLTAGE RANGE 40 ~ 58V OUTPUT CURRENT ACCURACY 5.0% RATED POWER 20.3W 25.2W 25.2W 25.2W RIPPLE & NOISE (max.) Note.1 4.6Vp-p 2.7Vp-p 2.2Vp-p 2Vp-p NO LOAD OUTPUT VOLTAGE (max.) 60V 50V 35V 25V SETUP TIME 500ms / 230VAC 2000ms / 115VAC at full load FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.9/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) A series THD< 20% when output loading70% at 115VAC TOTAL HARMONIC DISTORTION B series THD< 20% when output loading70% at 230VAC input and output loading80% at 277VAC input INPUT EFFICIENCY (Typ.) 82% AC CURRENT (Typ.) INRUSH CURRENT(max.) 0.6A/115VAC 0.3A/230VAC 0.2A/277VAC COLD START 10A(twidth=20s measured at 50% Ipeak) at 115VAC / 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 81% 80.5% 80% A series 37 units (circuit breaker of type B) / 37 units (circuit breaker of type C) at 115VAC B series 80 units (circuit breaker of type B) / 80 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT <0.5mA 120VAC / 240VAC Hiccup mode, recovers automatically after fault condition is removed. Shut down o/p voltage, re-power on to recover -30 ~ +60 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No. 250.0-08, ENEC EN613471, EN61347-2-13, EN62384(for B type only), BIS IS15885(for 350B,700B only), EAC TP TC 004,IP42 approved ; design refer to UL60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015 (B type only), EN61000-3-2 Class C ; EN61000-3-3, FCC part 18 non-consumer equipment (A type only), EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A, EAC TP TC 020 ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE 906.5K hrs min. MIL-HDBK-217F (25) 84*57*29.5mm (L*W*H) 0.19Kg; 72pcs/14.7Kg/0.92CUFT File Name:PCD-25-SPEC 2019-12-13 PCD-25 25W Single Output AC Dimmable LED Power Supply Mechanical Specification Case No.PCD16A series Unit:mm A Type:(PCD-25-_A) 3 84 15.3 14.5 15010 UL1430 18AWG V+(RED) V-(BLACK) 34.5 7.3 57 T case 7.3 755 UL1430 18AWG 15.3 AC/N(WHITE) 3.6 2 - -8 .9 2 AC/L(BLACK) 3 1.9 29.5 T case: Max. Case Temperature. B Type:(PCD-25-_B) 3 84 15.3 14.5 15010 UL1430 18AWG V+(RED) V-(BLACK) 34.5 755 7.3 NISPT-1 18AWG 3.6 2 - -8 .9 2 15.3 AC/N(BLUE) 57 T case 7.3 AC/L(BROWN) 3 1.9 29.5 T case: Max. Case Temperature. Block Diagram fosc : 90KHz(115VAC) 120KHz(230VAC) I/P EMI FILTER & RECTIFIERS POWER SWITCHING O.L.P. RECTIFIERS & FILTER +V -V DETECTION CIRCUIT PWM & PFC CONTROL O.C.P. File Name:PCD-25-SPEC 2019-12-13 PCD-25 25W Single Output AC Dimmable LED Power Supply Derating Curve series Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -30 60 50 40 -25 -5 0 15 30 40 50 60 (HORIZONTAL) 90 180 135 Type A (60Hz) 295 Type B (50Hz) INPUT VOLTAGE (V) AMBIENT TEMPERATURE () Power Factor Characteristic PF Constant Current Mode 1.00 0.98 0.96 0.94 0.92 0.90 0.88 0.86 0.84 0.82 0.80 0.78 277V ac(B Type) 230V ac(B Type) 115V ac(A Type) 50% 60% 70% 80% 90% 100% (25W) LOAD EFFICIENCY vs LOAD (PCD-25-350) EFFICIENCY (%) PCD-25 series possess superior working efficiency that up to 86% can be reached in field applications. 88 84 80 76 72 68 64 60 56 52 48 44 40 36 277Vac(B Type) 230Vac(B Type) 115Vac(A Type) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:PCD-25-SPEC 2019-12-13 25W Single Output AC Dimmable LED Power Supply PCD-25 series AC Dimming Operation The following diagram depicts a typical installation utilizing the PCD-25 : Io Rated current TRIAC Based Dimmer t MW PCD-25 Under direct driving, the power supply will work in "constant current mode (CC)" and output voltage of the power supply will be clamped by sum of forward voltage (V F ) of the LED strip. Dimmer Compatibility Chart Manufacturer Dimmer Model LUTRON SKYLARK SF-12P-277 (277VAC / 60Hz) LUTRON DVF-103P-277 (277VAC / 60Hz) LUTRON SKYLARK SF-10P (120VAC / 60Hz) LUTRON SKYLARK S-600P (120VAC / 60Hz) LUTRON SKYLARK DVF-103P (120VAC / 60Hz) LEVITON ILLUMATECH TM Cat.No.IP106 (120VAC / 60Hz) LEVITON SURESLIDE TM Cat.No.6633-P (120VAC / 60Hz) LEVITON SURESLIDE TM Cat. NO.6615-P (120VAC / 60Hz) JUNG Licht-Management 225 TDE (230VAC / 50Hz) JUNG Licht-Management 225 NV DE (230VAC / 50Hz) Tronic-Drehdimmer 286710 (230-240VAC / 50Hz) T39.01 (230VAC / 50Hz) CLIPSAL 32E450UDM (220-240VAC / 50Hz) CLIPSAL NO 32E450TM (220-240VAC / 50Hz) BERKER Bodo Ehmann LICHTREGLER Conduction angle: 30 degrees(min.) / 180 degrees(max.) File Name:PCD-25-SPEC 2019-12-13