3.5x2.8mm SURFACE MOUNT LED LAMP KAA-3528SURKSYKC HYPER RED SUPER BRIGHT YELLOW Features Description !BOTH CHIPS CAN BE CONTROLLED SEPARATELY. The Hyper Red source color devices are made with !SUITABLE FOR ALL SMT ASSEMBLY AND DH InGaAlP on GaAs substrate Light Emitting Diode. SOLDER PROCESS. The Super Bright Yellow source color devices are !AVAILABLE ON TAPE AND REEL. made with DH InGaAlP on GaAs substrate Light !PACKAGE: 1500PCS / REEL. Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB2123 APPROVED : J. Lu REV NO: V.3 CHECKED: Allen Liu DATE:DEC/24/2002 DRAWN:S.J.HOU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED (InGaAlP) KAA-3528SURKSYKC V i ew i n g An g l e Min . Ty p . 70 200 18 100 WATER CLEAR 21/2 120 SUPER BRIGHT YELLOW(InGaAlP) Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er D ev i c e peak Peak Wavelength Hyper Red Super Bright Yellow D Dominate Wavelength 1/2 Ty p . Max . Un its Tes t Co n d it io n s 650 590 nm IF = 2 0 m A Hyper Red Super Bright Yellow 635 590 nm IF = 2 0 m A Spectral Line Half-width Hyper Red Super Bright Yellow 28 20 nm IF = 2 0 m A C Capacitance Hyper Red Super Bright Yellow 35 20 pF V F = 0 V;f= 1 M Hz VF Forward Voltage Hyper Red Super Bright Yellow 1.95 2.0 2.5 2.5 V IF = 2 0 m A IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25C P ar am et er H y p er R ed Su p er B r ig h t Yello w Un its Power dissipation 170 125 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 175 mA 5 5 V Reverse Voltage -40C To +85C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB2123 APPROVED : J. Lu REV NO: V.3 CHECKED: Allen Liu DATE:DEC/24/2002 DRAWN:S.J.HOU PAGE: 2 OF 4 Hyper Red / Super Bright Yellow SPEC NO: DSAB2123 APPROVED : J. Lu KAA-3528SURKSYKC REV NO: V.3 CHECKED: Allen Liu DATE:DEC/24/2002 DRAWN:S.J.HOU PAGE: 3 OF 4 KAA-3528SURKSYKC SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB2123 APPROVED : J. Lu REV NO: V.3 CHECKED: Allen Liu DATE:DEC/24/2002 DRAWN:S.J.HOU PAGE: 4 OF 4