UMAF5.0A thru UMAF170CA ULTRAMITETM SURFACE MOUNT 500 Watt Transient Voltage Suppressor 5.0 to 170 V SCOTTSDALE DIVISION ENVIRONMENTALLY LEAD-FREE PACKAGE BA package outlines except with a much lower profile height. Its robust configuration in a "2010" style MELF package prevents damage to extendedlead terminals and virtually eliminates inductive parasitics from fast rise-time transients with very short internal/external conduction paths. They are also very UltraMite effective in protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4. WWW . Microsemi .C OM DESCRIPTION These 500 watt transient voltage suppressors offer power-handling capabilities only found in larger packages. They are also environmentally Lead-Free both externally and internally. They are used for protecting against a variety of transients from inductive switching environments or lower levels of induced secondary lightning effects of IEC61000-4-5. It offers the same size footprint as the popular DO-214AC or IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS * Available as a unidirectional or bidirectional device (bidirectional with CA suffix) * Fast response time * Suppresses transients up to 500 W @ 10/1000 s (see Figure 1, 2, and 3). * Robust 2010 MELF style flat package configuration for accurate pick-and-place handling * Fits same small narrow PCB pad layouts as "SMAJ" packages in JEDEC DO-214AC (or BA) * Very low height profile (approx 1 mm) * Available on Tape and Reel * Built-in stress relief with similar COE as PC boards * Lead-Free construction externally and internally * Optional Lead-Tin finish (UMA5.0A-170CA) * Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers * Protects sensitive components such as IC's, CMOS, 2 Bipolar, BiCMOS, ECL, DTL, T L, etc. * Protection from switching transients & induced RF * Compliant to IEC61000-4-2 and IEC61000-4-4 for ESD and EFT protection respectively * Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1: UMAF5.0 to UMAF100A or CA Class 2: UMAF5.0 to UMAF51A or CA Class 3: UMAF5.0 to UMAF24A or CA Class 4: UMAF5.0 to UMAF12A or CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1: UMAF5.0 to UMAF30A or CA Class 2: UMAF5.0 to UMAF16A or CA Virtually zero inductive parasitics with minimal Ldi/dt voltage overshoots for fast-rise-time transients MAXIMUM RATINGS MECHANICAL AND PACKAGING * * * * * * Peak Pulse Power dissipation at 25 C: 500 watts at 10/1000 s (also see Fig 1, 2, and 3) Impulse repetition rate (duty factor): 0.01% tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -55C to +150C Thermal resistance: 50 C/W junction to lead, or 115C/W junction to ambient when mounted on FR4 PC board (1oz Cu) with recommended 5 mm2 pads (see last page) Steady-State Power: 2.5 watts at TL = 25oC, or 1.08 watts at TA = 25C when mounted on FR4 PC board with recommended 5 mm2 footprint pads Forward Surge Current at 25C: 40 amps peak, 8.3 ms half-sine wave. Maximum voltage of 3.50 V (unidirectional only) Solder temperatures: 260 C for 10 s (maximum) Copyright 2002 9-16-2003 REV A * * * * * * * FRP substrate material and epoxy under-fill package meeting UL94V-0 Terminals Tin plated (solderable per MIL-STD-750, Method 2026) Body marked with part number without UMA prefix (e.g. F05, F15A, F33A, F58, F150CA, etc.) Cathode designated with band (no band on bidirectional) Weight: 0.020 grams (approx) Tape & Reel packaging per EIA-481-2 with 12 mm tape and 3000 units/reel (7 inch) or 10,000 units/reel (13 inch) See package dimensions on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 UMAF5.0A thru UMAF170CA * * UMAF5.0A thru UMAF170CA ULTRAMITETM SURFACE MOUNT 500 Watt Transient Voltage Suppressor 5.0 to 170 V SCOTTSDALE DIVISION ENVIRONMENTALLY LEAD-FREE Microsemi Part NUMBER* BREAKDOWN VOLTAGE V(BR) MIN @ I(BR) BREAKDOWN CURRENT I(BR) MAXIMUM CLAMPING VOLTAGE VC @ IPP PEAK PULSE CURRENT IPP MAXIMUM STANDBY CURRENT ID @ VWM (V) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113 121 126 137 146 162 177 193 209 243 259 275 (A) 54.3 48.5 44.7 41.7 38.8 36.7 34.7 32.6 29.4 27.4 25.1 23.2 21.5 20.6 19.2 18.1 17.2 15.4 14.1 12.8 11.9 11.0 10.3 9.4 8.6 7.8 7.2 6.9 6.5 6.1 5.7 5.3 5.2 4.9 4.4 4.1 4.0 3.6 3.4 3.1 2.8 2.6 2.4 2.1 1.9 1.8 (A) 800 800 500 200 100 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 UMAF5.0A thru UMAF170CA UMAF5.0A UMAF6.0A UMAF6.5A UMAF7.0A UMAF7.5A UMAF8.0A UMAF8.5A UMAF9.0A UMAF10A UMAF11A UMAF12A UMAF13A UMAF14A UMAF15A UMAF16A UMAF17A UMAF18A UMAF20A UMAF22A UMAF24A UMAF26A UMAF28A UMAF30A UMAF33A UMAF36A UMAF40A UMAF43A UMAF45A UMAF48A UMAF51A UMAF54A UMAF58A UMAF60A UMAF64A UMAF70A UMAF75A UMAF78A UMAF85A UMAF90A UMAF100A UMAF110A UMAF120A UMAF130A UMAF150A UMAF160A UMAF170A RATED WORKING PEAK STANDOFF VOLTAGE VWM (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 * Order with "CA" suffix for bi-directional types. Capacitance will be 1/2 that shown in figure 4. Copyright 2002 9-16-2003 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS @25oC Page 2 UMAF5.0A thru UMAF170CA ULTRAMITETM SURFACE MOUNT 500 Watt SCOTTSDALE DIVISION VWM PPP V(BR) ID Definition ENVIRONMENTALLY LEAD-FREE SYMBOLS & DEFINITIONS Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current IPP VC I(BR) WWW . Microsemi .C OM Symbol Transient Voltage Suppressor 5.0 to 170 V Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) GRAPHS FIGURE 2 Pulse Waveform for Exponential Surge Copyright 2002 9-16-2003 REV A C - Capacitance - Picofarads o Lead Temperature C FIGURE 3 Derating Curve UMAF5.0A thru UMAF170CA Test wave form parameterxs tr = 10sec. tp = 1000sec. Peak Pulse Power (Ppp) or Current o (IPP) in percentage of 25 C Rating tw Microseconds Figure 1 Peak Pulse Power (PPP) - Kilowatts versus Pulse Width (tW) - Microseconds V(BR) - Breakdown Voltage - Volts FIGURE 4 Typical Capacitance vs. Breakdown Voltage Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 UMAF5.0A thru UMAF170CA ULTRAMITETM SURFACE MOUNT 500 Watt Transient Voltage Suppressor 5.0 to 170 V SCOTTSDALE DIVISION ENVIRONMENTALLY LEAD-FREE WWW . Microsemi .C OM PACKAGE DIMENSIONS & PAD LAYOUT PAD LAYOUT DIM A B C D E F INCHES MIN MAX .173 .181 .083 .091 .033 .049 .033 .049 .002 .002 .020 .020 MM MIN 4.40 2.10 .85 .85 .05 .50 MAX 4.60 2.30 1.25 1.25 .05 .50 A B C INCHES .245 .075 .103 mm 6.22 1.90 2.62 UMAF5.0A thru UMAF170CA Copyright 2002 9-16-2003 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4