Programmable Attenuators Models 8310 & 8311 Programmable Attenuator Units IEEE-488 RS232\RS422/RS485 Now Available with Ethernet Control! Description Aeroflex / Weinschel's 8310 and 8311Series Programmable Attenuator Units represent a new concept in programmable attenuation for bench test and subsystem applications. Standard 8310 Series designs house and control various Aeroflex / Weinschel Programmable Attenuator Models (3200T, 150T, and 4200 Series) via front panel controls or standard communications interfaces including GPIB (IEEE488), Ethernet and RS-232/RS-422/RS-485. This series combines the features of the Aeroflex / Weinschel 8210A Device Controller with a front panel user interface to form a flexible, easy to use solution. Features o Provides a flexible, easy to program, low cost solution for your bench test/calibration setups and subsystem applications. o Multi-Channel attenuation paths (up to 4 input/outputs for 8310 & up to 6 input/outputs for 8311) o Relative vs. Nominal attenuation step function. o Wide choice of Frequency & Attenuation Ranges. - dc to 1, 2, 3, 6 & 18 GHz - NEW dc to 6 GHz Models - up to 127 dB - Solid-State (GaAs FET *& PIN) - Relay Switched o Models with Ethernet Option - Specify when ordering. o 75 Configurations o Accuracy & Repeatability. o Designed to interface with Aeroflex / Weinschel's line of digitally controlled programmable attenuators and other electromechanical devices. o Designed to interface with industry standard communication interfaces: - GPIB/IEEE-488 (HS-488 ready) - RS-232, RS-422, RS-485 - New Models with Ethernet Control (10 BaseT) o Rack Configurable: Model 8310 Series can be rack mounted either as a single unit using Rack Mounting Kit (P/N 193-8033-1) or two Model 8310's can be mounted together using Rack Mounting Kit (P/N 193-8033-2). These kits fit into any rack or cabinet that is designed per EIA RS-310 or MIL-STD-189. Model 8311 Series are equipted with rack ears. Most 8310 Series are single channel configurations where RF signal is routed through either the front or rear mounted Ports A & B but can be configured for up to four channels of attenuation, RF switching, amplification or other functions. Multiple programmable attenuators can be used inconjuction with other coaxial devices such as switches, power combiners, directional couplers, and filters creating single or multichannel subsystems. Multi-Channel 19" Rack Size Versions Applications Applications for the 8310 and 8311 Series range from providing control of a single Programmable Attenuator in a bench test/lab environment using a PC and a terminal emulator, to complex system applications where the 8310/8311 Series are employed to control many devices to create custom/ semi-custom subsystems to reduce overall design cost. Aeroflex / Weinschel can provide a variety of custom designed driver interfaces for various devices, such as RF switches, relays, pin attenuators, motorized step attenuators, displays, and other devices, as well as complete subsystem design and integration services. Contact us with your specialized needs. For additional information on the Model 8310, visit our website @ www.aeroflex.com/AW/8310.htm 129 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: weinschel-sales@aeroflex.com Revision Date: 8/15/11 Programmable Attenuators Specifications SPECIFICATION DESCRIPTION Input Power Requirements ac Environmental Operating Temperature: Storage Temperature: Humidity: Altitude: IEEE-488 Bus (1) 100 to 240 Vac, 50/60 Hz, 50 Watts 0 to +50C -4 to +167F (-20 to +75C) 96% 40,000' (12,192M) Connector: Protocols: Indicators: 24-pin per IEEE-488.1 per IEEE-488.2 Remote (RMT), Listen (LSN), Talk (TLK), SRQ (SRQ) (2) Connector: Signals: Baud Rates: Data Bits: Handshaking: Parity: Indicators: 9-pin male D TXD, RXD, RTS, CTS, DTR, GND 2400, 9600, 19200, and 38400 8 None, RTS/CTS, XON/XOFF None, Odd, Even Tx (Transmit) and Rx (Receive) RS-422 BUS (3) RS-485 Bus (4) Connector: Signals: Baud Rates: Data Bits: Handshaking: Parity: Indicators: 9-pin male D TXD+, TDX-, RXD+, RTX-, RTS+, RTS-, CTS+, CTS-, and signal GND 2400, 9600, 19200, and 38400 8 None, RTS/CTS, XON/XOFF None, Odd, Even Tx (Transmit) and Rx (Receive) Ethernet TC/IP 10 Base T Connector: Console Connector: RF Characteristics(5) See ordering guides (pg 128 through 130) RS-232 Bus Serial I/O Standard RJ45 9-pin male D 1. GPIB/IEEE-488 model allows user-selectable addresses, Not included with Models with ethernet option. 2. RS-232 can be used with standard PC serial port for short and medium distances (up to approximately 50 ft). 3. RS-422, designed for very long distance communications (4000 ft) and & optimized as a single node protocol, typically with one device connected to a single port. 4. RS-485, designed for very long distance communications (4000 ft) & optimized for multi-drop connections that can used to create a low cost network. 5. Refer to Individual data sheet for detailed specifications on internal programmables. Ordering Guide...8310 Series with 4200 Programmables Model No Attenuation Value (dB) 8310-136-F 63.75/0.25 8310-136-R 63.75/0.25 8310-136-2-F 63.75/0.25 8310-136-2-R 63.75/0.25 8310-137-F 63/1 8310-137-R 63/1 8310-137-2-F 63/1 8310-137-2-R 63/1 8310-138-F 103/1 8310-138-R 103/1 8310-138-2-F 103/1 8310-138-2-R 103/1 8310-138-3-T 103/1 8310-138-4-T 103/1 Frequency Insertion Loss Range (GHz) (maximum) 0.8-2.5 6.0 0.8-2.5 6.0 0.8-2.5 6.0 0.8-2.5 6.0 0.8-3.0 4.7 0.8-3.0 4.7 0.8-3.0 4.7 0.8-3.0 4.7 0.8-3.0 6.0 0.8-3.0 6.0 0.8-3.0 6.0 0.8-3.0 6.0 0.8-3.0 6.0 0.8-3.0 6.0 SWR (Maximum) 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 No of Channels 1 1 2 2 1 1 2 2 1 1 2 2 3 4 Attenuator Model No.* 4228-63.75 4228-63.75 4228-63.75 4228-63.75 4226-63 4226-63 4226-63 4226-63 4228-103 4228-103 4228-103 4228-103 4228-103 4228-103 Connector Type N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F Conn Location Front Rear Front Rear Front Rear Front Rear Front Rear Front Rear Front/Rear Front/Rear *Refer to Individual data sheet for detailed specifications on internal programmables. Add N to the end of the Model number for ethernet option, IEEE-488 bus not included with option. 130 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: weinschel-sales@aeroflex.com Revision Date: 8/15/11 Programmable Attenuators Ordering Guide...8310 Series with 3200 Programmables Model No 8310-1-F 8310-1-R 8310-1-2-F 8310-1-2-R 8310-1-3-T 8310-2-F 8310-2-R 8310-2-2-F 8310-2-2-R 8310-35-F 8310-35-F-E 8310-35-R 8310-35-R-E 8310-35-2-F 8310-35-2-R 8310-35-3-T 8310-35-4-T 8310-35-4-T-E 8310-36-F 8310-36-R 8310-36-2-F 8310-36-2-R 8310-36-3-T 8310-37-F 8310-37-R 8310-37-2-F 8310-37-2-R 8310-37-3-T 8310-37-4-T 8310-38-F 8310-38-F-E 8310-38-R 8310-38-2-F 8310-38-2-R 8310-38-3-T 8310-38-4-T 8310-352-F 8310-352-R 8310-352-2-F 8310-352-2-R 8310-352-3-T 8310-352-4-T Attenuation Value (dB) 63/1 63/1 63/1 63/1 63/1 63/1 63/1 63/1 63/1 127/1 127/1 127/1 127/1 127/1 127/1 127/1 127/1 127/1 64.5/0.1 64.5/0.1 64.5/0.1 64.5/0.1 64.5/0.1 63.75/0.25 63.75/0.25 63.75/0.25 63.75/0.25 63.75/0.25 63.75/0.25 63/1 63/1 63/1 63/1 63/1 63/1 63/1 103/1 103/1 103/1 103/1 103/1 103/1 Frequency Range (GHz) dc-1.0 (75) dc-1.0 (75) dc-1.0 (75) dc-1.0 (75) dc-1.0 (75) dc-1.0 (75) dc-1.0 (75) dc-1.0 (75) dc-1.0 (75) dc-2.0 dc-3.0 dc-2.0 dc-3.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-3.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-3.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-2.0 dc-6.0 dc-6.0 dc-6.0 dc-6.0 dc-6.0 dc-6.0 Insertion Loss (maximum) 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.75 dB 6.75 dB 6.75 dB 6.75 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 8.0 dB 8.0 dB 8.0 dB 8.0 dB 8.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 6.0 dB 5.25 dB 5.25 dB 5.25 dB 5.25 dB 5.25 dB 5.25 dB 5.25 dB 6.00 dB 6.00 dB 6.00 dB 6.00 dB 6.00 dB 6.00 dB SWR (Maximum) 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.55 1.55 1.55 1.55 1.55 1.55 No of Channels 1 1 2 2 1 1 1 2 2 1 1 1 1 2 2 3 4 4 1 1 2 2 3 1 1 2 2 3 4 1 1 1 2 2 3 4 1 1 2 2 3 4 Attenuator Model No.* 3250T-63 3250T-63 3250T-63 3250T-63 3250T-63 3250T-63 3250T-63 3250T-63 3250T-63 3200T-1 3200T-1E 3200T-1 3200T-1E 3200T-1 3200T-1 3200T-1 3200T-1 3200T-1E 3209T-1 3209T-1 3209T-1 3209T-1 3209T-1 3200T-2 3200T-2 3200T-2 3200T-2 3200T-2 3200T-2 3206T-1 3206T-1E 3206T-1 3206T-1 3206T-1 3206T-1 3206T-1 3408T-103 3408T-103 3408T-103 3408T-103 3408T-103 3408T-103 Connector Type BNC/F BNC/F BNC/F BNC/F BNC/F F/F F/F F/F F/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F N/F Conn Location Front Rear Front Rear Front to Rear Front Rear Front Rear Front Front Rear Rear Front Rear Front to Rear Front to Rear Front to Rear Front Rear Front Rear Front to Rear Front Rear Front Rear Front to Rear Front to Rear Front Front Rear Front Rear Front to Rear Front to Rear Front Rear Front Rear Front to Rear Front to Rear Ordering Guide...8310 Series with 150 Programmables Model No 8310-201-F 8310-201-R 8310-201-2-F 8310-201-2-R 8310-202-F 8310-202-R 8310-204-F 8310-204-R 8310-204-2-F Attenuation Value (dB) 70/10 70/10 70/10 70/10 121/1 121/1 62/2 62/2 62/2 Frequency Range (GHz) dc-18.0 dc-18.0 dc-18.0 dc-18.0 dc-18.0 dc-18.0 dc-18.0 dc-18.0 dc-18.0 Insertion Loss (maximum) 3.25 dB 3.25 dB 3.25 dB 3.25 dB 5.25 dB 5.25 dB 3.70 dB 3.70 dB 3.70 dB SWR (Maximum) 1.75 1.75 1.75 1.75 1.95 1.95 1.95 1.95 1.95 No of Channels 1 1 2 2 1 1 1 1 2 Attenuator Model No.* 150T-70 150T-70 150T-70 150T-70 150T-11+150T-110 150T-11+150T-110 150T-62 150T-62 150T-62 Connector Type SMA/F SMA/F SMA/F SMA/F SMA/F SMA/F SMA/F SMA/F SMA/F Conn Location Front Rear Front Rear Front Rear Front Rear Front 8310-204-2-R 62/2 dc-18.0 3.70 dB 1.95 2 150T-62 SMA/F Rear *Refer to Individual data sheet for detailed specifications on internal programmables. 131 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: weinschel-sales@aeroflex.com Revision Date: 8/15/11 Programmable Attenuators Ordering Guide...8311 Series! Model No 8311-1-6-F 8311-38-6-F 8311-38-12-T 8311-137-6-F 8311-202-2-F 8311-202-3-F 8311-204-6-F 8311-352-6-F 8311-352-9-T Attenuation Value (dB) 63/1 63/1 63/1 63/1 121/1 121/1 62/2 Frequency Range (GHz) dc-1.0 (75) dc-2.0 dc-2.0 0.8-3.0 dc-18.0 dc-18.0 dc-18.0 103/1 103/1 dc-6.0 dc-6.0 Insertion Loss (maximum) 6.00 dB 5.25 dB 5.25 dB 4.70 dB 5.25 dB 5.25 dB 3.70 dB 6.00 dB 6.00 dB SWR (Maximum) 1.60 1.40 1.40 1.60 1.95 1.95 1.95 No of Attenuator Channels Model No.* 6 3250T-63 6 3206T-1 12 3206T-1 6 4226-63 2 150T-11+150T-110 3 150T-11+150T-110 6 150T-62 1.55 1.55 6 9 3408T-103 3408T-103 Connector Type BNC/F N/F N/F N/F SMA/F SMA/F SMA/F SMA/F SMA/F Conn Location Front Front Front-Rear Front Front Front Front Front Front-Rear Physical Dimensions 8310 Series: 8311 Series: NOTE: 1. All dimensions are given in mm (inches) and are maximum, unless otherwise specified. 2. Connector location (Front/Rear) may vary depending on Model ordered. 132 Connector Type N SMA BNC F DIM A 29.2 (1.15) 8.6 (0.34) 18.8 (0.74) 9.65 (0.38) 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: weinschel-sales@aeroflex.com Revision Date: 8/15/11