HDSP Series Low Current Seven Segment Displays Data Sheet HDSP-335x Series, HDSP-555x Series HDSP-751x Series, HDSP-A10x Series HDSP-A80x Series, HDSP-A90x Series HDSP-E10x Series, HDSP-F10x Series HDSP-G10x Series, HDSP-H10x Series HDSP-K12x, K70x Series, HDSP-N10x Series Description Features These low current seven segment displays are designed for applications requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low currents. Drive currents as low as 1 mA per segment are available. x Low Power Consumption Pin for pin equivalent displays are also available in a standard current or high light ambient design. The standard current displays are available in all colors and are ideal for most applications. The high light ambient displays are ideal for sunlight ambients or long string lengths. For additional information see the 7.6 mm Micro Bright Seven Segment Displays, 10 mm Seven Segment Displays, 7.6 mm/10.9 mm Seven Segment Displays, 14.2 mm Seven Segment Displays, 20 mm Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets. x Industry Standard Size x Industry Standard Pinout x Choice of Character Size - 7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in), 14.2 mm (0.56 in), 20 mm (0.80 in) x Choice of Colors - AlGaAs Red, High Efficiency Red (HER), Yellow, Green x Excellent Appearance - Evenly Lighted Segments - 50 Viewing Angle x Design Flexibility - Common Anode or Common Cathode - Single and Dual Digit - Left and Right Hand Decimal Points - 1. Overflow Character x Categorized for Luminous Intensity - Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display x Excellent for Long Digit String Multiplexing Devices AlGaAs HDSP- HER HDSP- Yellow HDSP- Green HDSP- Description Package Drawing A101 7511 A801 A901 7.6 mm Common Anode Right Hand Decimal A A103 7513 A803 A903 7.6 mm Common Cathode Right Hand Decimal B A107 7517 A807 A907 7.6 mm Common Anode 1. Overflow C A108 7.6 mm Common Cathode 1. Overflow D F101 A908 10 mm Common Anode Right Hand Decimal E F103 10 mm Common Cathode Right Hand Decimal F F107 10 mm Common Anode 1. Overflow G F108 10 mm Common Cathode 1. Overflow H G101 10 mm Two Digit Common Anode Right Hand Decimal X G103 10 mm Two Digit Common Cathode Right Hand Decimal Y E100 10.9 mm Common Anode Left Hand Decimal I E101 3351 10.9 mm Common Anode Right Hand Decimal J E103 3353 10.9 mm Common Cathode Right Hand Decimal K 3356 10.9 mm Universal 1. Overflow[1] L H101 5551 14.2 mm Common Anode Right Hand Decimal M H103 5553 14.2 mm Common Cathode Right Hand Decimal N H107 5557 14.2 mm Common Anode 1. Overflow O H108 5558 14.2 mm Common Cathode 1. Overflow P 14.2 mm Two Digit Common Anode Right Hand Decimal R K121 K123 14.2 mm Two Digit Common Cathode Right Hand Decimal S N101 K703 20 mm Common Anode Right Hand Decimal T N103 20 mm Common Cathode Right Hand Decimal U N105 20 mm Common Cathode Left Hand Decimal V Note: 1. Universal pinout brings the anode and cathode of each segment's LED out to separate pins. See internal diagrams L or W. 2 Part Numbering System 5082 - X XX X - X X X XX HDSP - X XX X - X X X XX Mechanical Option [1] 00: No Mechanical Option Color Bin Options [1, 2] 0: No Color Bin Limitation Maximum Intensity Bin [1, 2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1, 2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] G: Green Device Specific Configuration [1] Refer to Respective Datasheet Package [1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 3 Package Dimensions FUNCTION Pin A 1 2 3 4 5 6 7 8 9 10 ANODE[4] CATHODE f CATHODE g CATHODE e CATHODE d ANODE[4] CATHODE DP CATHODE c CATHODE b CATHODE a B CATHODE[5] ANODE f ANODE g ANODE e ANODE d CATHODE[5] ANODE DP ANODE c ANODE b ANODE a C ANODE[4] CATHODE PLUS CATHODE MINUS NC NC ANODE[4] CATHODE DP CATHODE c CATHODE b NC D CATHODE[5] ANODE PLUS ANODE MINUS NC NC CATHODE[5] ANODE DP ANODE c ANODE b NC Notes: 1. All dimensions in millimetres (inches). 2. Maximum. 3. All untoleranced dimensions are for reference only. 4. Redundant anodes. 5. Redundant cathodes. 4 Package Dimensions (cont.) FUNCTION Pin E 1 2 3 4 5 6 7 8 9 10 ANODE[4] CATHODE f CATHODE g CATHODE e CATHODE d ANODE[4] CATHODE DP CATHODE c CATHODE b CATHODE a F CATHODE[5] ANODE f ANODE g ANODE e ANODE d CATHODE[5] ANODE DP ANODE c ANODE b ANODE a G ANODE[4] CATHODE PLUS CATHODE MINUS NC NC ANODE[4] CATHODE DP CATHODE c CATHODE b NC H CATHODE[5] ANODE PLUS ANODE MINUS NC NC CATHODE[5] ANODE DP ANODE c ANODE b NC Notes: 1. All dimensions in millimetres (inches). 2. Maximum. 3. All untoleranced dimensions are for reference only. 4. Redundant anodes. 5. Redundant cathodes. 5 Package Dimensions (cont.) FUNCTION Pin I J 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CATHODE a CATHODE f ANODE[3] NO PIN NO PIN CATHODE dp CATHODE e CATHODE d NO CONN.[5] CATHODE c CATHODE g NO PIN CATHODE b ANODE[3] CATHODE a CATHODE f ANODE[3] NO PIN NO PIN NO CONN.[5] CATHODE e CATHODE d CATHODE dp CATHODE c CATHODE g NO PIN CATHODE b ANODE[3] K ANODE a ANODE f CATHODE[6] NO PIN NO PIN NO CONN.[5] ANODE e ANODE d ANODE dp ANODE c ANODE g NO PIN ANODE b CATHODE[6] L CATHODE d ANODE d NO PIN CATHODE c CATHODE e ANODE e ANODE c ANODE dp CATHODE dp CATHODE b CATHODE a NO PIN ANODE a ANODE b Notes: 1. All dimensions in millimetres (inches). 2. All untoleranced dimensions are for reference only. 3. Redundant anodes. 4. Unused dp position. 5. See internal circuit diagram. 6. Redundant cathodes. 7. See part number table for L.H.D.P. and R.H.D.P. designation. 6 Package Dimensions (cont.) FUNCTION Pin M 1 2 3 4 5 6 7 8 9 10 CATHODE e CATHODE d ANODE[4] CATHODE c CATHODE DP CATHODE b CATHODE a ANODE[4] CATHODE f CATHODE g N ANODE e ANODE d CATHODE[5] ANODE c ANODE DP ANODE b ANODE a CATHODE[5] ANODE f ANODE g O P CATHODE c ANODE c, d CATHODE b ANODE a, b, DP CATHODE DP CATHODE a ANODE a, b, DP ANODE c, d CATHODE d NO PIN ANODE c CATHODE c, d ANODE b CATHODE a, b, DP ANODE DP ANODE a CATHODE a, b, DP CATHODE c, d ANODE d NO PIN Notes: 1. All dimensions in millimetres (inches). 2. Maximum. 3. All untoleranced dimensions are for reference only. 4. Redundant anodes. 5. Redundant cathodes. 7 Package Dimensions (cont.) Pin T 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 NO PIN CATHODE a CATHODE f ANODE[3] CATHODE e ANODE[3] NO CONNEC NO PIN NO PIN CATHODE dp CATHODE d ANODE[3] CATHODE c CATHODE g CATHODE b NO PIN ANODE[3] NO PIN FUNCTION U NO PIN ANODE a ANODE f CATHODE[6] ANODE e CATHODE[6] NO CONNEC NO PIN NO PIN ANODE dp ANODE d CATHODE[6] ANODE c ANODE g ANODE b NO PIN CATHODE[6] NO PIN V NO PIN ANODE a ANODE f CATHODE[6] ANODE e CATHODE[6] ANODE dp NO PIN NO PIN NO PIN ANODE d CATHODE[6] ANODE c ANODE g ANODE b NO PIN CATHODE[6] NO PIN Notes: 1. All dimensions in millimetres (inches). 2. All untoleranced dimensions are for reference only. 3. Redundant anodes. 4. Unused dp position. 5. See internal circuit diagram. 6. Redundant cathodes. 7. See part number table for L.H.D.P. and R.H.D.P. designation. 8 Package Dimensions (cont.) FUNCTION Pin Notes: 1. All dimensions in millimetres (inches). 2. All untoleranced dimensions are for reference only. 3. Where applicable. 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 R, X E CATHODE NO. 1 D CATHODE NO. 1 C CATHODE NO. 1 DP CATHODE NO. 1 E CATHODE NO. 2 D CATHODE NO. 2 G CATHODE NO. 2 C CATHODE NO. 2 DP CATHODE NO. 2 B CATHODE NO. 2 A CATHODE NO. 2 F CATHODE NO. 2 DIGIT NO. 2 ANODE DIGIT NO. 1 ANODE B CATHODE NO. 1 A CATHODE NO. 1 G CATHODE NO. 1 F CATHODE NO. 1 S, Y E ANODE NO. 1 D ANODE NO. 1 C ANODE NO. 1 DP ANODE NO. 1 E ANODE NO. 2 D ANODE NO. 2 G ANODE NO. 2 C ANODE NO. 2 DP ANODE NO. 2 B ANODE NO. 2 A ANODE NO. 2 F ANODE NO. 2 DIGIT NO. 2 CATHODE DIGIT NO. 1 CATHODE B ANODE NO. 1 A ANODE NO. 1 G ANODE NO. 1 F ANODE NO. 1 Internal Circuit Diagram 10 A, E B, F C, G D, H I J K L M N O P T U V Internal Circuit Diagram (cont.) Hole pattern for PCB layout to achieve uniform 0.450 In. Digit to digit pitch. for HDSP-FXXX to HDSP-GXXX. Absolute Maximum Ratings Description AlGaAs Red HDSP-A10X/ E10X/H10X/K12X/ N10X/F10X/G10X Series Average Power per Segment or DP 37 HER HDSP-751X/ Yellow 335X/555X/K70X HDSP-A80X Series Series Peak Forward Current per Segment or DP 52 45 DC Forward Current per Segment or DP 15[1] Operating Temperature Range -20 to +100[9] Green HDSP-A90X Series Units 64 mW mA 15[2] -40 to +100 mA C -55 to +100 C Reverse Voltage per segment or DP 3.0 V Wave Soldering Temperature for 3 Seconds (1.60 mm [0.063 in.] below seating body) 250 C Storage Temperature Range Notes: 1. Derate above 91C at 0.53 mA/C. 2. Derate HER/Yellow above 80C at 0.38 mA/C and Green above 71C at 0.31 mA/C 11 Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series HDSP- Parameter Symbol A10x Typ. 315 600 IF = 1 mA 3600 IF = 5 mA 650 IF = 1 mA 3900 IF = 5 mA 330 F10x, G10x E10x Min. Luminous Intensity/Segment[1,2] (Digit Average) IV 390 270 N10x 650 IF = 5 mA 590 IF = 1 mA 3500 IF = 5 mA 1.6 IF = 1 mA 1.7 Peak Wavelength OPEAK 645 nm Dominant Wavelength[3] Od 637 nm Reverse Voltage/Segment or DP[4] VR 15 V Temperature Coefficient of VF/ Segment or DP 'VF/C -2 mV mV/C E10x RTJ-PIN 340 400 N10x 430 IF = 5 mA IF = 20 mA Pk 2.2 320 Thermal Resistance LED Junction-to-Pin H10x, K12x 12 V 255 F10x, G10x IF = 5 mA IF = 1 mA VF A10x IF = 1 mA 700 Forward Voltage/Segment or DP 3.0 Test Conditions 4200 1.8 All Devices Units Pcd 3900 400 H10x, K12x Max. C/W/Seg IR = 100 PA High Efficiency Red Device Series HDSP- Parameter Symbol 160 751x 335x, 555x, K70x Min. Luminous Intensity/Segment[1,2,6] (Digit Average) IV 200 Typ. Max. 270 IF = 2 mA IF = 5 mA 300 Pcd 1480 IF = 5 mA 2.1 All Devices Peak Wavelength OPEAK Dominant Wavelength[3] Od Reverse Voltage/Segment or DP[4] VR Temperature Coefficient of VF/ Segment or DP 'VF/C 3.0 751x 335x IF = 5 mA IF = 2 mA IF = 2 mA 1.7 VF IF = 2 mA 370 1.6 Forward Voltage/Segment or DP Test Conditions 1050 1200 270 Units V IF = 5 mA IF = 20 mA Pk 2.5 635 nm 626 nm 30 V -2 mV/C IR = 100 PA 200 Thermal Resistance LED Junction-to-Pin 280 RTJ-PIN 555x, K70x C/W 345 Yellow Device Series HDSP- Parameter Symbol Luminous Intensity/Segment[1,2] (Digit Average) IV Min. Typ. 250 420 Max. Units Pcd 1300 1.7 13 IF = 4 mA IF = 10 mA IF = 4 mA Forward Voltage/Segment or DP VF 1.8 Peak Wavelength OPEAK 583 Dominant Wavelength[3,5] Od 581.5 585 Reverse Voltage/Segment or DP[4] VR 3.0 30 V Temperature Coefficient of VF/ Segment or DP 'VF/C -2 mV/C Thermal Resistance LED Junction-to-Pin RTJ-PIN 200 C/W 2.1 A80x Test Conditions V IF = 5 mA IF = 20 mA Pk 2.5 nm 592.5 nm IR = 100 PA Green Device Series HDSP- Parameter Symbol Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF Min. Typ. 250 475 Max. Units Pcd 1500 1.9 Peak Wavelength OPEAK 566 Dominant Wavelength[3,5] Od 571 Reverse Voltage/Segment or DP[4] VR Temperature Coefficient of VF/ Segment or DP Thermal Resistance LED Junction-to-Pin 3.0 IF = 4 mA IF = 10 mA IF = 4 mA 2.0 2.1 A90x Test Conditions V IF = 10 mA IF = 20 mA Pk 2.5 nm 577 nm 30 V 'VF/C -2 mV/C RTJ-PIN 200 C/W IR = 100 PA Notes: 1. Device case temperature is 25C prior to the intensity measurement. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is the single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 14 AlGaAs Red Figure 1. Maximum Allowable Average or DC Current vs. Ambient Temperature. Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 15 HER, Yellow, Green Figure 5. Maximum Allowable Average or DC Current vs. Ambient Temperature. Figure 6. Forward Current vs. Forward Voltage. Figure 7. Relative Luminous Intensity vs. DC Forward Current. Figure 8. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 16 Intensity Bin Limits (mcd) AlGaAs Red HER HDSP-A10x HDSP-751x IV Bin Category Min. Max. IV Bin Category Min. Max. E 0.315 0.520 B 0.160 0.240 F 0.428 0.759 C 0.200 0.300 G 0.621 1.16 D 0.250 0.385 H 0.945 1.71 E 0.315 0.520 I 1.40 2.56 F 0.428 0.759 G 0.621 1.16 IV Bin Category Min. Max. HDSP-E10x/F10x/G10x B 0.240 0.366 IV Bin Category Min. Max. C 0.300 0.477 D 0.391 0.650 D 0.391 0.650 E 0.532 0.923 E 0.532 0.923 0.755 1.39 J 2.10 3.84 K 3.14 5.75 L 4.70 8.55 HDSP-335x F 0.755 1.39 F G 1.13 2.08 G 1.13 2.08 H 1.70 3.14 H 1.70 3.14 HDSP-H10x/K12x HDSP-555x/K70x IV Bin Category Min. Max. IV Bin Category Min. Max. C 0.415 0.690 A 0.270 0.400 D 0.565 0.990 B 0.325 0.500 E 0.810 1.50 C 0.415 0.690 F 1.20 2.20 D 0.565 0.990 G 1.80 3.30 E 0.810 1.50 H 2.73 5.00 F 1.20 2.20 I 4.09 7.50 G 1.80 3.30 H 2.73 5.00 I 4.09 7.50 HDSP-N10x IV Bin Category Min. Max. A 0.270 0.400 B 0.325 0.500 C 0.415 0.690 D 0.565 0.990 E 0.810 1.50 F 1.20 2.20 G 1.80 3.30 H 2.73 5.00 I 4.09 7.50 17 Intensity Bin Limits (mcd) (cont.) Yellow Color Categories HDSP-A80x Color Dominant Wavelength (nm) Bin Min. Max. IV Bin Category Min. Max. 1 581.50 585.00 D 0.250 0.385 3 584.00 587.50 E 0.315 0.520 2 586.50 590.00 4 589.00 592.50 2 573.00 577.00 Yellow F 0.425 0.760 G 0.625 1.14 H 0.940 1.70 3 570.00 574.00 I 1.40 2.56 4 567.00 571.00 J 2.10 3.84 5 564.00 568.00 K 3.14 5.76 L 4.71 8.64 M 7.07 13.00 N 10.60 19.40 O 15.90 29.20 P 23.90 43.80 Q 35.80 65.60 Green Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representatives for further clarification/information. Electrical/Optical For more information on electrical/optical characteristics, please see Application Note 1005. Contrast Enhancement Green For information on contrast enhancement, please see Application Note 1015. HDSP-A90x IV Bin Category Min. Max. E 0.315 0.520 F 0.425 0.760 G 0.625 1.14 H 0.940 1.70 I 1.40 2.56 J 2.10 3.84 K 3.14 5.76 L 4.71 8.64 M 7.07 13.00 N 10.60 19.40 O 15.90 29.20 P 23.90 43.80 Q 35.80 65.60 Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5989-3880EN AV02-2554EN - December 1, 2010