HDSP Series
Low Current Seven Segment Displays
Data Sheet
Description
These low current seven segment displays are designed
for applications requiring low power consumption. They
are tested and selected for their excellent low current
characteristics to ensure that the segments are matched
at low currents. Drive currents as low as 1 mA per segment
are available.
Pin for pin equivalent displays are also available in a
standard current or high light ambient design. The
standard current displays are available in all colors and are
ideal for most applications. The high light ambient displays
are ideal for sunlight ambients or long string lengths. For
additional information see the 7.6 mm Micro Bright Seven
Segment Displays, 10 mm Seven Segment Displays, 7.6
mm/10.9 mm Seven Segment Displays, 14.2 mm Seven
Segment Displays, 20 mm Seven Segment Displays, or
High Light Ambient Seven Segment Displays data sheets.
HDSP-335x Series, HDSP-555x Series
HDSP-751x Series, HDSP-A10x Series
HDSP-A80x Series, HDSP-A90x Series
HDSP-E10x Series, HDSP-F10x Series
HDSP-G10x Series, HDSP-H10x Series
HDSP-K12x, K70x Series, HDSP-N10x Series
Features
x Low Power Consumption
x Industry Standard Size
x Industry Standard Pinout
x Choice of Character Size
– 7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in),
14.2 mm (0.56 in), 20 mm (0.80 in)
x Choice of Colors
– AlGaAs Red, High Eciency Red (HER), Yellow, Green
x Excellent Appearance
– Evenly Lighted Segments
– ±50° Viewing Angle
x Design Flexibility
– Common Anode or Common Cathode
– Single and Dual Digit
– Left and Right Hand Decimal Points
– ±1. Overow Character
x Categorized for Luminous Intensity
– Yellow and Green Categorized for Color Use of Like
Categories Yields a Uniform Display
x Excellent for Long Digit String Multiplexing
2
Devices
AlGaAs
HDSP-
HER
HDSP-
Yellow
HDSP-
Green
HDSP- Description
Package
Drawing
A101 7511 A801 A901 7.6 mm Common Anode Right Hand Decimal A
A103 7513 A803 A903 7.6 mm Common Cathode Right Hand Decimal B
A107 7517 A807 A907 7.6 mm Common Anode ±1. Overow C
A108 A908 7.6 mm Common Cathode ±1. Overow D
F101 10 mm Common Anode Right Hand Decimal E
F103 10 mm Common Cathode Right Hand Decimal F
F107 10 mm Common Anode ±1. Overow G
F108 10 mm Common Cathode ±1. Overow H
G101 10 mm Two Digit Common Anode Right Hand Decimal X
G103 10 mm Two Digit Common Cathode Right Hand Decimal Y
E100 10.9 mm Common Anode Left Hand Decimal I
E101 3351 10.9 mm Common Anode Right Hand Decimal J
E103 3353 10.9 mm Common Cathode Right Hand Decimal K
3356 10.9 mm Universal ±1. Overow[1] L
H101 5551 14.2 mm Common Anode Right Hand Decimal M
H103 5553 14.2 mm Common Cathode Right Hand Decimal N
H107 5557 14.2 mm Common Anode ±1. Overow O
H108 5558 14.2 mm Common Cathode ±1. Overow P
K121 14.2 mm Two Digit Common Anode Right Hand Decimal R
K123 K703 14.2 mm Two Digit Common Cathode Right Hand Decimal S
N101 20 mm Common Anode Right Hand Decimal T
N103 20 mm Common Cathode Right Hand Decimal U
N105 20 mm Common Cathode Left Hand Decimal V
Note:
1. Universal pinout brings the anode and cathode of each segment's LED out to separate pins. See internal diagrams L or W.
3
Part Numbering System
Notes:
1. For codes not listed in the gure above, please refer to the respective datasheet or contact
your nearest Avago representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically
restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for
specic bin limit information.
Mechanical Option [1]
00: No Mechanical Option
Color Bin Options [1, 2]
0: No Color Bin Limitation
Maximum Intensity Bin [1, 2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin [1, 2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color [1]
G: Green
Device Specific Configuration [1]
Refer to Respective Datasheet
Package [1]
Refer to Respective Datasheet
5082 – X XX X – X X X XX
HDSP – X XX X – X X X XX
4
Package Dimensions
FUNCTION
Pin A B C D
1
2
3
4
5
6
7
8
9
10
ANODE[4]
CATHODE f
CATHODE g
CATHODE e
CATHODE d
ANODE[4]
CATHODE DP
CATHODE c
CATHODE b
CATHODE a
CATHODE5
ANODE f
ANODE g
ANODE e
ANODE d
CATHODE5
ANODE DP
ANODE c
ANODE b
ANODE a
ANODE4
CATHODE PLUS
CATHODE MINUS
NC
NC
ANODE[4]
CATHODE DP
CATHODE c
CATHODE b
NC
CATHODE5
ANODE PLUS
ANODE MINUS
NC
NC
CATHODE[5]
ANODE DP
ANODE c
ANODE b
NC
Notes:
1. All dimensions in millimetres (inches).
2. Maximum.
3. All untoleranced dimensions are for reference only.
4. Redundant anodes.
5. Redundant cathodes.
5
Package Dimensions (cont.)
FUNCTION
Pin E F G H
1
2
3
4
5
6
7
8
9
10
ANODE[4]
CATHODE f
CATHODE g
CATHODE e
CATHODE d
ANODE[4]
CATHODE DP
CATHODE c
CATHODE b
CATHODE a
CATHODE5
ANODE f
ANODE g
ANODE e
ANODE d
CATHODE5
ANODE DP
ANODE c
ANODE b
ANODE a
ANODE4
CATHODE PLUS
CATHODE MINUS
NC
NC
ANODE[4]
CATHODE DP
CATHODE c
CATHODE b
NC
CATHODE5
ANODE PLUS
ANODE MINUS
NC
NC
CATHODE[5]
ANODE DP
ANODE c
ANODE b
NC
Notes:
1. All dimensions in millimetres (inches).
2. Maximum.
3. All untoleranced dimensions are for reference only.
4. Redundant anodes.
5. Redundant cathodes.
6
Package Dimensions (cont.)
FUNCTION
Pin I J K L
1
2
3
4
5
6
7
8
9
10
11
12
13
14
CATHODE a
CATHODE f
ANODE3
NO PIN
NO PIN
CATHODE dp
CATHODE e
CATHODE d
NO CONN.[5]
CATHODE c
CATHODE g
NO PIN
CATHODE b
ANODE3
CATHODE a
CATHODE f
ANODE3
NO PIN
NO PIN
NO CONN.[5]
CATHODE e
CATHODE d
CATHODE dp
CATHODE c
CATHODE g
NO PIN
CATHODE b
ANODE3
ANODE a
ANODE f
CATHODE[6]
NO PIN
NO PIN
NO CONN.[5]
ANODE e
ANODE d
ANODE dp
ANODE c
ANODE g
NO PIN
ANODE b
CATHODE[6]
CATHODE d
ANODE d
NO PIN
CATHODE c
CATHODE e
ANODE e
ANODE c
ANODE dp
CATHODE dp
CATHODE b
CATHODE a
NO PIN
ANODE a
ANODE b
Notes:
1. All dimensions in millimetres (inches).
2. All untoleranced dimensions are for reference only.
3. Redundant anodes.
4. Unused dp position.
5. See internal circuit diagram.
6. Redundant cathodes.
7. See part number table for L.H.D.P. and R.H.D.P. designation.
7
Package Dimensions (cont.)
FUNCTION
Pin M N O P
1
2
3
4
5
6
7
8
9
10
CATHODE e
CATHODE d
ANODE4
CATHODE c
CATHODE DP
CATHODE b
CATHODE a
ANODE4
CATHODE f
CATHODE g
ANODE e
ANODE d
CATHODE[5]
ANODE c
ANODE DP
ANODE b
ANODE a
CATHODE[5]
ANODE f
ANODE g
CATHODE c
ANODE c, d
CATHODE b
ANODE a, b, DP
CATHODE DP
CATHODE a
ANODE a, b, DP
ANODE c, d
CATHODE d
NO PIN
ANODE c
CATHODE c, d
ANODE b
CATHODE a, b, DP
ANODE DP
ANODE a
CATHODE a, b, DP
CATHODE c, d
ANODE d
NO PIN
Notes:
1. All dimensions in millimetres (inches).
2. Maximum.
3. All untoleranced dimensions are for reference only.
4. Redundant anodes.
5. Redundant cathodes.
8
Package Dimensions (cont.)
FUNCTION
Pin T U V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
NO PIN
CATHODE a
CATHODE f
ANODE[3]
CATHODE e
ANODE[3]
NO CONNEC
NO PIN
NO PIN
CATHODE dp
CATHODE d
ANODE[3]
CATHODE c
CATHODE g
CATHODE b
NO PIN
ANODE[3]
NO PIN
NO PIN
ANODE a
ANODE f
CATHODE[6]
ANODE e
CATHODE[6]
NO CONNEC
NO PIN
NO PIN
ANODE dp
ANODE d
CATHODE[6]
ANODE c
ANODE g
ANODE b
NO PIN
CATHODE[6]
NO PIN
NO PIN
ANODE a
ANODE f
CATHODE[6]
ANODE e
CATHODE[6]
ANODE dp
NO PIN
NO PIN
NO PIN
ANODE d
CATHODE[6]
ANODE c
ANODE g
ANODE b
NO PIN
CATHODE[6]
NO PIN
Notes:
1. All dimensions in millimetres (inches).
2. All untoleranced dimensions are for reference only.
3. Redundant anodes.
4. Unused dp position.
5. See internal circuit diagram.
6. Redundant cathodes.
7. See part number table for L.H.D.P. and R.H.D.P. designation.
9
Package Dimensions (cont.)
FUNCTION
Pin R, X S, Y
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E CATHODE NO. 1
D CATHODE NO. 1
C CATHODE NO. 1
DP CATHODE NO. 1
E CATHODE NO. 2
D CATHODE NO. 2
G CATHODE NO. 2
C CATHODE NO. 2
DP CATHODE NO. 2
B CATHODE NO. 2
A CATHODE NO. 2
F CATHODE NO. 2
DIGIT NO. 2 ANODE
DIGIT NO. 1 ANODE
B CATHODE NO. 1
A CATHODE NO. 1
G CATHODE NO. 1
F CATHODE NO. 1
E ANODE NO. 1
D ANODE NO. 1
C ANODE NO. 1
DP ANODE NO. 1
E ANODE NO. 2
D ANODE NO. 2
G ANODE NO. 2
C ANODE NO. 2
DP ANODE NO. 2
B ANODE NO. 2
A ANODE NO. 2
F ANODE NO. 2
DIGIT NO. 2 CATHODE
DIGIT NO. 1 CATHODE
B ANODE NO. 1
A ANODE NO. 1
G ANODE NO. 1
F ANODE NO. 1
Notes:
1. All dimensions in millimetres (inches).
2. All untoleranced dimensions are for reference only.
3. Where applicable.
10
UTV
MN O P
IJKL
A, E B, F C, G D, H
Internal Circuit Diagram
11
Internal Circuit Diagram (cont.)
Hole pattern for PCB layout to achieve uniform 0.450 In. Digit to digit pitch. for HDSP-FXXX to HDSP-GXXX.
Absolute Maximum Ratings
Description
AlGaAs Red -
HDSP-A10X/
E10X/H10X/K12X/
N10X/F10X/G10X
Series
HER
HDSP-751X/
335X/555X/K70X
Series
Yellow
HDSP-A80X
Series
Green
HDSP-A90X
Series Units
Average Power per Segment or DP 37 52 64 mW
Peak Forward Current per Segment or DP 45 mA
DC Forward Current per Segment or DP 15[1] 15[2] mA
Operating Temperature Range –20 to +100[9] –40 to +100 °C
Storage Temperature Range –55 to +100 °C
Reverse Voltage per segment or DP 3.0 V
Wave Soldering Temperature for 3 Seconds
(1.60 mm [0.063 in.] below seating body) 250 °C
Notes:
1. Derate above 91°C at 0.53 mA/°C.
2. Derate HER/Yellow above 80°C at 0.38 mA/°C and Green above 71°C at 0.31 mA/°C
12
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
A10x
Luminous Intensity/Segment[1,2]
(Digit Average) IV
315 600
Pcd
IF = 1 mA
3600 IF = 5 mA
F10x, G10x 330 650 IF = 1 mA
3900 IF = 5 mA
E10x 390 650 IF = 1 mA
3900 IF = 5 mA
H10x, K12x 400 700 IF = 1 mA
4200 IF = 5 mA
N10x 270 590 IF = 1 mA
3500 IF = 5 mA
All Devices
Forward Voltage/Segment or DP VF
1.6
V
IF = 1 mA
1.7 IF = 5 mA
1.8 2.2 IF = 20 mA Pk
Peak Wavelength OPEAK 645 nm
Dominant Wavelength[3] Od637 nm
Reverse Voltage/Segment or DP[4] VR3.0 15 V IR = 100 PA
Temperature Coecient of VF/
Segment or DP
'VF/°C -2 mV mV/°C
A10x
Thermal Resistance LED Junction-to-Pin RTJ-PIN
255
°C/W/Seg
F10x, G10x 320
E10x 340
H10x, K12x 400
N10x 430
13
High Eciency Red
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
751x
Luminous Intensity/Segment[1,2,6]
(Digit Average) IV
160 270
Pcd
IF = 2 mA
1050 IF = 5 mA
335x, 555x,
K70x
200 300 IF = 2 mA
1200 IF = 5 mA
270 370 IF = 2 mA
1480 IF = 5 mA
All Devices
Forward Voltage/Segment or DP VF
1.6
V
IF = 2 mA
1.7 IF = 5 mA
2.1 2.5 IF = 20 mA Pk
Peak Wavelength OPEAK 635 nm
Dominant Wavelength[3] Od 626 nm
Reverse Voltage/Segment or DP[4] VR 3.0 30 V IR = 100 PA
Temperature Coecient of VF/
Segment or DP
'VF/°C -2 mV/°C
751x
Thermal Resistance LED Junction-to-Pin RTJ-PIN
200
°C/W
335x 280
555x, K70x 345
Yellow
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
A80x
Luminous Intensity/Segment[1,2]
(Digit Average) IV 250 420 Pcd IF = 4 mA
1300 IF = 10 mA
Forward Voltage/Segment or DP VF
1.7
V
IF = 4 mA
1.8 IF = 5 mA
2.1 2.5 IF = 20 mA Pk
Peak Wavelength OPEAK 583 nm
Dominant Wavelength[3,5] Od 581.5 585 592.5 nm
Reverse Voltage/Segment or DP[4] VR 3.0 30 V IR = 100 PA
Temperature Coecient of VF/
Segment or DP
'VF/°C -2 mV/°C
Thermal Resistance LED Junction-to-Pin RTJ-PIN 200 °C/W
14
Green
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
A90x
Luminous Intensity/Segment[1,2]
(Digit Average) IV 250 475 Pcd IF = 4 mA
1500 IF = 10 mA
Forward Voltage/Segment or DP VF
1.9
V
IF = 4 mA
2.0 IF = 10 mA
2.1 2.5 IF = 20 mA Pk
Peak Wavelength OPEAK 566 nm
Dominant Wavelength[3,5] Od 571 577 nm
Reverse Voltage/Segment or DP[4] VR 3.0 30 V IR = 100 PA
Temperature Coecient of VF/
Segment or DP
'VF/°C -2 mV/°C
Thermal Resistance LED Junction-to-Pin RTJ-PIN 200 °C/W
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is the single wavelength which denes the color of the device.
4. Typical specication for reference only. Do not exceed absolute maximum ratings.
5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
15
Figure 3. Relative Luminous Intensity vs. DC Forward Current.
Figure 1. Maximum Allowable Average or DC Current vs. Ambient Temperature.
Figure 4. Relative Eciency (Luminous Intensity per Unit Current) vs.
Peak Current.
Figure 2. Forward Current vs. Forward Voltage.
AlGaAs Red
16
Figure 7. Relative Luminous Intensity vs. DC Forward Current.
Figure 5. Maximum Allowable Average or DC Current vs. Ambient Temperature.
Figure 8. Relative Eciency (Luminous Intensity per Unit Current) vs.
Peak Current.
Figure 6. Forward Current vs. Forward Voltage.
HER, Yellow, Green
17
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-A10x
IV Bin Category Min. Max.
E 0.315 0.520
F 0.428 0.759
G 0.621 1.16
H 0.945 1.71
I 1.40 2.56
J 2.10 3.84
K 3.14 5.75
L 4.70 8.55
HER
HDSP-751x
IV Bin Category Min. Max.
B 0.160 0.240
C 0.200 0.300
D 0.250 0.385
E 0.315 0.520
F 0.428 0.759
G 0.621 1.16
HDSP-E10x/F10x/G10x
IV Bin Category Min. Max.
D 0.391 0.650
E 0.532 0.923
F 0.755 1.39
G 1.13 2.08
H 1.70 3.14
HDSP-H10x/K12x
IV Bin Category Min. Max.
C 0.415 0.690
D 0.565 0.990
E 0.810 1.50
F 1.20 2.20
G 1.80 3.30
H 2.73 5.00
I 4.09 7.50
HDSP-N10x
IV Bin Category Min. Max.
A 0.270 0.400
B 0.325 0.500
C 0.415 0.690
D 0.565 0.990
E 0.810 1.50
F 1.20 2.20
G 1.80 3.30
H 2.73 5.00
I 4.09 7.50
HDSP-335x
IV Bin Category Min. Max.
B 0.240 0.366
C 0.300 0.477
D 0.391 0.650
E 0.532 0.923
F 0.755 1.39
G 1.13 2.08
H 1.70 3.14
HDSP-555x/K70x
IV Bin Category Min. Max.
A 0.270 0.400
B 0.325 0.500
C 0.415 0.690
D 0.565 0.990
E 0.810 1.50
F 1.20 2.20
G 1.80 3.30
H 2.73 5.00
I 4.09 7.50
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5989-3880EN
AV02-2554EN - December 1, 2010
Color Categories
Color Bin
Dominant Wavelength (nm)
Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
Note:
All categories are established for classication of products. Products may
not be available in all categories. Please contact your Avago representa-
tives for further clarication/information.
Electrical/Optical
For more information on electrical/optical characteristics,
please see Application Note 1005.
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloroethylene, carbon
tetrachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
For information on soldering LEDs, please refer to Appli-
cation Note 1027.
Intensity Bin Limits (mcd) (cont.)
Yellow
HDSP-A80x
IV Bin Category Min. Max.
D 0.250 0.385
E 0.315 0.520
F 0.425 0.760
G 0.625 1.14
H 0.940 1.70
I 1.40 2.56
J 2.10 3.84
K 3.14 5.76
L 4.71 8.64
M 7.07 13.00
N 10.60 19.40
O 15.90 29.20
P 23.90 43.80
Q 35.80 65.60
Green
HDSP-A90x
IV Bin Category Min. Max.
E 0.315 0.520
F 0.425 0.760
G 0.625 1.14
H 0.940 1.70
I 1.40 2.56
J 2.10 3.84
K 3.14 5.76
L 4.71 8.64
M 7.07 13.00
N 10.60 19.40
O 15.90 29.20
P 23.90 43.80
Q 35.80 65.60