Philips Semiconductors Product specification Low power dual voltage comparator LM193/A/293/A/393/A/2903 DESCRIPTION PIN CONFIGURATION The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0mV max. for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage. D, N, FE Packages OUTPUT A 1 INVERTING INPUT A 2 NON-INVERTING INPUT A GND The LM193 series was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the LM193 series will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators. 8 V+ 7 OUTPUT B 3 6 INVERTING INPUT B 4 5 NON-INVERTING INPUT B A B TOP VIEW SL00079 Figure 1. Pin Configuration FEATURES * Wide single supply voltage range 2.0VDC to 36VDC or dual supplies 1.0VDC, to 18VDC * Very low supply current drain (0.8mA) independent of supply EQUIVALENT CIRCUIT voltage (2.0mW/comparator at 5.0VDC) * Low input biasing current 25nA * Low input offset current 5nA and offset voltage 2mV * Input common-mode voltage range includes ground * Differential input voltage range equal to the power supply voltage * Low output 250mV at 4mA saturation voltage * Output voltage compatible with TTL, DTL, ECL, MOS and CMOS V+ 3.5A Q2 + INPUT 100A 3.5A 100A Q3 Q1 Q4 logic systems OUTPUT - INPUT Q8 APPLICATIONS Q7 * A/D converters * Wide range VCO * MOS clock generator * High voltage logic gate * Multivibrators Q5 Q6 (One Comparator Only) SL00080 Figure 2. Equivalent Circuit ORDERING INFORMATION TEMPERATURE RANGE ORDER CODE DWG # 8-Pin Ceramic Dual In-Line Package (Cerdip) DESCRIPTION -55C to +125C LM193FE 0580A 8-Pin Ceramic Dual In-Line Package (Cerdip) -25C to +85C LM293FE 0580A 8-Pin Plastic Dual In-Line Package (DIP) -25C to +85C LM293N SOT97-1 8-Pin Plastic Small Outline (SO) Package -25C to +85C LM293D SOT96-1 8-Pin Plastic Dual In-Line Package (DIP) -25C to +85C LM293AN SOT97-1 8-Pin Ceramic Dual In-Line Package (Cerdip) 0 to +70C LM393AFE 0580A 8-Pin Ceramic Dual In-Line Package (Cerdip) 0 to +70C LM393FE 0580A 8-Pin Plastic Small Outline (SO) Package 0 to +70C LM393D SOT96-1 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70C LM393N SOT97-1 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70C LM393AN SOT97-1 8-Pin Plastic Dual In-Line Package (DIP) -40C to +125C LM2903N SOT97-1 8-Pin Plastic Dual In-Line Package (DIP) -40C to +125C LM2903D SOT97-1 1995 Nov 27 1 853-0932 16050 Philips Semiconductors Product specification Low power dual voltage comparator LM193/A/293/A/393/A/2903 ABSOLUTE MAXIMUM RATINGS SYMBOL VCC PARAMETER Supply voltage Differential input voltage VIN Input voltage PD Maximum power dissipation, TA=25C (still-air)1 F package N package D package Output short-circuit to ground2 RATING UNIT 36 or 18 VDC 36 VDC -0.3 to +36 VDC 780 1160 780 mW mW mW Continuous )3 IIN Input current (VIN<-0.3VDC 50 mA TA Operating temperature range LM193/193A LM293/293A LM393/393A LM2903 -55 to +125 -25 to +85 0 to +70 -40 to +125 C C C C TSTG Storage temperature range -65 to +150 C TSOLD Lead soldering temperature (10sec max) 300 C NOTES: 1. Derate above 25C, at the following rates: F package at 6.2mW/C N package at 9.3mW/C D package at 6.2mW/C 2. Short circuits from the output to V+ can cause excessive heating and eventual destruction. The maximum output current is approximately 20mA independent of the magnitude of V+. 3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the comparators to go to the V+ voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states will re-establish when the input voltage, which was negative, again returns to a value greater than -0.3VDC. 1995 Nov 27 2 Philips Semiconductors Product specification Low power dual voltage comparator LM193/A/293/A/393/A/2903 DC AND AC ELECTRICAL CHARACTERISTICS V+=5VDC, LM193/193A: -55C TA +125C, unless otherwise specified. LM293/293A: -25C TA +85C, unless otherwise specified. LM393/393A: 0C TA +70C, unless otherwise specified. LM2903: -40C TA +125C, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS VOS Input offset voltage2 TA=25C Over temp. VCM Input common-mode voltage range3, 6 TA=25C Over temp. VIDR Differential input voltage1 Keep all VINs 0VDC (or V- if need) IBIAS Input bias current4 IIN(+) or IIN(-) with output in linear range TA=25C Over temp. IOS Input offset current IIN(+)-IIN(-) TA=25C Over temp. IOL Output sink current VIN(-)1VDC, VIN(+)=0, V01.5VDC TA=25C Output leakage current V0=5VDC, TA=25C VIN(+)1VDC, VIN(-)=0 V0=30VDC Over temp. ICC AV Supply current Voltage gain LM193A Min LM293A/393A Typ Max 1.0 2.0 4.0 0 0 V+-1.5 V+-2.0 Min Max 1.0 2.0 4.0 0 0 V+-1.5 V+-2.0 V+ 6.0 LM2903 Typ Min UNIT Typ Max 2.0 9 7.0 15 mV mV V+-1.5 V+-2.0 V V V+ V 0 0 V+ 25 100 300 25 250 400 25 200 250 500 nA nA 3.0 25 100 5.0 50 150 5 50 50 200 nA nA 16 6.0 0.1 16 6.0 0.1 1.0 16 mA 0.1 nA 1.0 1.0 A RL= on both comparators, TA=25C 0.8 1 0.8 1 0.8 1 mA RL= on both comparators, V+=30V 1 2.5 1 2.5 1 2.5 mA RL15k, V+=15VDC, TA=25C 50 200 50 200 25 100 V/mV VIN(-)1VDC, VIN(+)=0, ISINK4mA VOL Saturation voltage TA=25C 250 Over temp. tLSR Large-signal response time VIN=TTL logic swing, VREF=1.4VDC VRL=5VDC, RL=5.1k, TA=25C tR Response time5 VRL=5VDC, RL=5.1k TA=25C 1995 Nov 27 400 250 700 3 400 400 700 400 mV 700 mV 300 300 300 ns 1.3 1.3 1.3 s Philips Semiconductors Product specification Low power dual voltage comparator LM193/A/293/A/393/A/2903 DC ELECTRICAL CHARACTERISTICS (Continued) V+=5VDC, LM193/193A: -55C TA +125C, unless otherwise specified. LM293/293A: -25C TA +85C, unless otherwise specified. LM393/393A: 0C TA +70C, unless otherwise specified. LM2903: -40C TA +125C, unless otherwise specified. SYMBOL PARAMETER VOS Input offset voltage2 TA=25C Over temp. VCM Input common-mode voltage range3, 6 TA=25C Over temp. VIDR Differential input voltage1 IBIAS Input bias current4 IIN(+) or IIN(-) with output in linear range TA=25C Over temp. IOS Input offset current IIN(+)-IIN(-) TA=25C Over temp. IOL Output sink current VIN(-)1VDC, VIN(+)=0, V01.5VDC TA=25C Output leakage current VIN(+)1VDC, VIN(-)=0, V0=5VDC TA=25C V0=30VDC over temp. ICC Supply current LM193 TEST CONDITIONS Min Max 2.0 5.0 9.0 0 0 V-1.5 V-2.0 Keep all VINs 0VDC (or V-if need) 6.0 RL15k, V+=15VDC VOL Saturation voltage VIN(-)1VDC, VIN(+)=0, ISINK4mA TA=25C Over temp. tLSR Large signal response time tR Response time5 Max 2.0 5.0 9.0 mV mV V+-1.5 V+-2.0 V V V+ V 25 100 300 25 250 400 nA nA 3.0 25 100 5.0 50 150 nA nA 16 6.0 16 0.8 1 0.8 2.5 200 250 mA 0.1 1.0 50 UNIT Typ 0 0 0.1 RL= on both comparators, TA=25C Voltage gain Min V+ RL= on both comparators, V+=30V AV LM293/393 Typ 50 400 700 1.0 nA A 1 mA 2.5 mA 200 250 V/mV 400 700 mV mV VIN=TTL logic swing, VREF=1.4VDC, VRL=5VDC RL=5.1k, TA=25C 300 300 ns VRL=5VDC, RL=5.1k TA=25C 1.3 1.3 s NOTES: 1. Positive excursions of input voltage may exceed the power supply level by 17V. As long as the other voltage remains within the common-mode range, the comparator will provide a proper output state. The low input voltage state must not be less than -0.3VDC (VDC below the magnitude of the negative power supply, if used). 2. At output switch point, VO 1.4VDC, RS=0 with V+ from 5VDC to 30VDC and over the full input common-mode range (0VDC to V+-1.5VDC). 3. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is V+-1.5V, but either or both inputs can go to 30VDC without damage. 4. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the reference or input lines. 5. The response time specified is for a 100mV input step with a 5mV overdrive. 6. For input signals that exceed VCC, only the over-driven comparator is affected. With a 5V supply, VIN should be limited to 25V maximum, and a limiting resistor should be used on all inputs that might exceed the positive supply. 1995 Nov 27 4 Philips Semiconductors Product specification Low power dual voltage comparator LM193/A/293/A/393/A/2903 EQUIVALENT CIRCUIT V+ 700k 100k - + VC FREQUENCY CONTROL VOLTAGE INPUT 10 30k 5.1k 500pF 3.0k LM393 - + OUTPUT 1 LM393 0.1F + V - /2 20k OUTPUT 2 20k 50k + V + /2 LM393 - NOTES: V+ = 30VDC + 250m VDC < VC = 50VDC 700H < fO = 100kHz Two-Decade High-Frequency VCO +V + V (12V 2RS REF HI +V IN DC) 10K + RS LAMP - + + 5V 2RS DC 2N2222 - 360 Limit Comparator + +V REF 4 - V+ 100k 100 + 5V DC 360 + - + +V REF 3 - 100k 100 VO + 5V DC TTL-to-MOS Logic Converter 360 +V V+ + REF 2 - 200k 100k 100 + 5V 100k V+ DC 360 0.1F + - +V VO 0 + REF 1 - 100 200k CRYSTAL 100k I - 100kHz Visible Voltage Indicator Crystal-Controlled Oscillator NOTE: Input of unused comparators should be grounded. SL00081 Figure 3. Equivalent Circuit 1995 Nov 27 2.0k 5 Philips Semiconductors Product specification Low power dual voltage comparator LM193/A/293/A/393/A/2903 TYPICAL PERFORMANCE CHARACTERISTICS Input Current Output Saturation Voltage 10 60 TA = 0oC 40 20 TA = +125oC 10 20 +70oC 30 1.0 TA = +125oC 0.1 TA = -55oC 0.01 TA = 25o 0.001 0.01 40 0.1 1.0 10 100 v + -- SUPPLY VOLTAGE -- VDC IO -- OUTPUT SINK CURRENT (mA) Response Time for Various Input Overdrives -- Negative Transition Response Time for Various Input Overdrives -- Positive Transition 6 5mV = INPUT OVERDRIVE + 5V 5 4 20mV 3 VIN 2 1 OUT OF SATURATION OUTPUT VOLTAGE VO -- mV OUTPUT VOLTAGE VO -- mV TA = +25oC TA = 0 INPUT VOLTAGE VIN -- mV V O-- SATURATION VOLTAGE (V DC) VIN (CM) = 0 VDC RIN (CM) = 10k TA = -55oC - + 100mV 5.1K VOUT 0 0 OVERDRIVE -50 -100 0.5 1.0 1.5 INPUT OVERDRIVE = 100mV 5 4 5mV 3 2 20mV + 5V 0 0 TA = 25oC -50 -100 TA = 25oC 0 6 1 INPUT VOLTAGE VIN -- mV I N -- INPUT CURRENT -- nADC 80 5.1K - + VOUT OVERDRIVE 0 2.0 VIN 0.5 1.0 1.5 2.0 TIME -- sec TIME -- sec SL00082 Figure 4. Typical Performance Characteristics 1995 Nov 27 6