The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HiroseFX2 website RoHS search at www.hirose-connectors.com, or contact yourPiece HiroseConnector sales representative. Series1.27mm Pitch Multi-function Two FX2M6 Series Ordering Imformation FX2M6 A - 60 P - 1.27 DSA L 1 2 3 4 5 6 7 1 Series Name : FX2M6 2 Type No. :A 3 Number of contacts 4 Contact Style P :Header S :Receptacle : 60 5 Contact pitch : 1.27mm 6 DSA :Straight type 7 L :Board prefixed pin BStacking Variation Unit: mm Receptacle FX2C-60S Header -1.27DSA FX2C2-60S FX2M6B-60S FX2M6A-60S -1.27DSA -1.27DSAL -1.27DSAL FX2C-60P -1.27DSA 12 14 28.2 44.2 FX2C1-60P -1.27DSA 13 15 29.2 *2 45.2 *2 FX2C2-60P -1.27DSA 14 16 30.2 *2 46.2 *2 FX2M6B-60P -1.27DSAL 28.4 *1 30.4 *1 44 60 FX2M6A-60P -1.27DSAL 34.4 *1 36.4 *1 50 66 Note 1. Mate the male and female connectors to meet the allowable clearance within 1.0mm. However, set it within 0.4mm in combination *1. Note 2. In case of combination *2, 0.6mm clearance occurs on the mating side, but no problem. Note 3. After the board is mounted, fix the board by screws. A113 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkConnector the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX2 Series1.27mm Pitch Multi-function Two Piece Header BPCB mounting pattern Unit: mm A114 Part Number CL No. A FX2M6A-60P-1.27DSAL(71) 572-1036-8-71 30.9 FX2M6B-60P-1.27DSAL(71) 572-1041-8-71 24.9 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HiroseFX2 website RoHS search at www.hirose-connectors.com, or contact yourPiece HiroseConnector sales representative. Series1.27mm Pitch Multi-function Two Receptacle BPCB mounting pattern Unit: mm Part Number CL No. A FX2M6A-60S-1.27DSAL(71) 572-1037-0-71 35.1 FX2M6B-60S-1.27DSAL(71) 572-1042-0-71 19.1 RoHS YES A115 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkConnector the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX2 Series1.27mm Pitch Multi-function Two Piece BConnection Circuit Diagram Type A, B Connection to Cable 1 A1 B2 bn 1 ****** 1 bn ****** B1 ****** an an ****** A2 Connection to Cable 2 An a1 Bn b1 Type A, A Connection to Cable 1 A116 Connection to Cable 2 A2 b2 B2 a2 ****** a1 ****** B1 ****** b1 ****** A1 An bn Bn an n= Number of Contacts 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HiroseFX2 website RoHS search at www.hirose-connectors.com, or contact yourPiece HiroseConnector sales representative. Series1.27mm Pitch Multi-function Two BConnecter Use Hand book 1. Selecting connector 1 The FX2 series is the perfect flux tight connector for the straight type in the soldering process, but it depends on the soldering process whether non-cleaning type (FX2C-*, FX2B-*) or cleaning type (FX2CA-*, FX2BA-*) should be selected. Please be sure to clean the right angle type (FX2-*, FX2B-*) connector. To clean the connector, please be sure to use detergent, containing no contaminant. 2 To use the socket cable type, if a vibration or shock load is applied to the cable, select the lock type. In addition, if a load is applied to the cable, please be sure to use the cable clamp. 2. Prefixed Process to Board If the prefixed process is required for mounting the board, please use the prefixed pin type. (Applicable board thickness t = 1.60.1) Note: In order to prevent the dip post breakage in the connector installation to the board, please insert the board in parallel to the connector so that the prefixed pin may be forcibly pushed in, after the dip post is guided to the board through-hole. 3. Mating Side Tolerance Clearance (Example) FX2C-*P-1.27DSA and FX2C-*S-1.27DSA Set the tolerance clearance within 1mm to mate the male and female connectors. (Except for the lock cable type) 4. Cautions: for Using Lock Cable Type 1 When the connector is mated, insert the connector by the end so as not to make a clearance. 2 When the connector is inserted or extracted, please insert or extract the connector after the both lock levers are laid inside. If the connector is inserted or extracted with either lock lever laid, the connector may be broken. 3 please do not open the lock lever outside. A117 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkConnector the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX2 Series1.27mm Pitch Multi-function Two Piece 5. SMT Type Connector Mounting Temperature Profile (Reference) IR Reflow HRS test conditions Test boardGlass epoxy 110mm40mm1.6mm thick Solder method (MAX 250c) 260 96.5%Sn/ 3%Ag/ 0.5%Cu 240 220c 220 Temperature (c) Metal mask : 0.2mm thick (Straight) Reflow cycles : 2 cycles 200c 200 0.15mm thick(Right angle) 180 160 140 : Reflow Solder composition : Paste, The temperature profile is based on the above conditions. 150c In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific 0 recommendations. (90 to 120 sec.) Preheating(150 to 200c) (MAX 60sec.) Soldering Time (220cmin) Time (sec.) * In regard to the straight type, please contact Hirose Electric about the recommended open area ratio when using a 0.15mm metal mask. 6. SMT Type Connector mated height As shown in the application pattern, the mated height of the male/female connector doesn't contain the solder paste thickness. Thus, after the connector installation in the board, consider that the mated height will be widened in proportion to the solder paste thickness. A118