Coded Switches Type 07 Horizontal Front-panel operation 3 Drilling diagram View from component side o8,6 o8,6 3,1 1C4 4,17 1C4 1C4 AL-0,25 Standard: AL=12,8mm / max. 30mm 1,1 1,1 5,08 5,08 2 C o0 0 8 ,9 0 o3 o5,5 0 13,67 13,77 10,5 5,42 2,25 10,35 10,16 1 2,3 2,3 5,08 BCD 18 HEX 1115' 4 2,54 2,54 7.59 Horizontal for panel mounting Front-panel cut out 2,5 5 6D11 M6 x 0,75 5 D 11 Panel mounting waterproof O-Ring and nut supplied 5,5 0,7 AL 0,25 8 Standard: AL=11,5mm / max. 26mm Vertical o5,5 o3 2 8 o0 ,9 12,7 10,16 2C8 0 Drilling diagram View from component side 2,25 12,7 BCD 18 HEX 1115' C 1C4 10,16 3,1 10,6 AL-0,25 1 2,54 Standard: AL=12,8mm / max. 30mm 4 2,54 Vertical for panel mounting Front-panel cut out M6 x 0,75 Panel mounting waterproof O-Ring and nut supplied 14,4 5 D 11 6D11 2,5 5 5,5 0,7 AL 0,25 Standard: AL=11,5mm / max. 26mm Description BCD-, HEX or Gray coding. Shorting or non-shorting switch mode. Horizontal or vertical verison. Operation by screwdriver or stainless steel shaft (knob). Sealed and washable 60 Rotation with positive detent setting Solid tinned terminals (0,4 x 0,7 mm) Terminations for direct mounting on circuit boards 2.54 mm (0.1'') pitch 1 mm = 0.04 inch 1 inch = 25.4 mm Indexing positions, end stop according to the code 16 resp. 10 positions with stop between the first and last position or without stop setting Reflow version available on request Coded Switches Type 07 Technical information Mechanical data Material data Electrical data Case high quality temperature-resistant thermoplastic Application data Voltage < 42 V Current < 0.2 A Switching torque 2,2 Ncm 25% (BCD) 3,2 Ncm 25% (HEX and Gray code) Spindle-shaft stainless steel Switching capacity 5 VA Insulation high quality thermoplastic Switching voltage 42 V (resistive load) Max. force on the end-stop 45 Ncm (BCD) 35 Ncm (HEX and Gray code) Contact parts alloy copper > 3 m gold plated Switching current 0,2 A (resistive load) Soldering data Test voltage at 50 Hz/i min 500 V ~ Indexing mechanism 36 = 10 positions (BCD) 22 30' = 16 positions (HEX and Gray code) Panel mounting admissible torque max. 100 Ncm Handsoldering Plastic wafer 5 s/ 260 C Insulation resistance at 500 V = 1 min 1011 Temperature range Storage temperature: - 40 C to + 85 C Machine soldering Operating temperature: - 25 C to Wave 5 s/ 260 C + 85 C Reflow (THR) 5 s/ 260 C (on request) Vibration resistance Lead free reflow (on request) 10-2000 Hz/10 g Contact and lead resistance < 50 m in new condition Various Life >10000 switching cycles (>200000 switching positions BCD) (>320000 switching positions HEX or Gray) Assembled in cleanroom Class 100 000, US Federal Standard Sealed and washable IP protection degree sealable up to IP 68 (2bar) Coding BCD BCD complem. 23 22 21 20 0 1 * 2 * 3 * 4 * 5 * 6 * * 7 * * 8 * 9 * * * * * 23 22 21 20 0 * * * 1 * * * 2 * * 3 * * * * * 5 * * 6 * 7 * * * 8 * * 9 * * 0 * * 2 * 3 * 4 * 5 * 6 * * 7 * * 8 * 9 * * * * * 1 * * * 2 * * 3 * * 4 * * 5 * * 6 * 7 * * * * A * * B * * C * * D * * * C * D * * E * * * 1 mm = 0.04 inch * E * F * 1 inch = 25.4 mm 0 1 * * * * 23 22 21 20 * 2 * 3 9 * * * 8 A * * 0 * B F * Gray Code 23 22 21 20 23 22 21 20 1 * 4 HEX complem. HEX * * * * * * 4 * * 5 * * 6 * 7 * 8 * * 9 * * * * * A * * * B * * * C * * D * * E * F * * * * 61 Special Options Type 07 Ordering an option To order a special option please use the order form. Please specify your requirements and send it to your local contact or to Elma. Standard: AL = 12,8 mm max. 30 mm Special shaft length Please state length AL (see diagram) measured from mounting face when ordering (max. AL = 30 mm) Specify shaft length on order form. Panel mounting/waterproof version M6 x 0.75 The threaded bushing is made of die cast allows (2,5 m tin plated, chromate finish) for enviromental protection such as salt fog exposure. Max. admissible tightening torque for nuts 100 Ncm (~10 kp cm) Order example ZB (panel mounting) ZB/WD (panel mounting and waterproof) Standard: AL = 11,5 mm max. 26 mm Waterproof 2 bar (IP 68) standard, (higher level on request) Please complete order form. Front panel cut out Panel mounting waterproof O-Ring and nut supplied Adjustable stops (internal stop) Adjustable stops can be set during assembly on all switch positions between 1 and 16, e. g. coded output 0 to F. Adjustable stop settings which do not start from coded output 0 ( e. g. 3-6) are available on request. Please complete order form. Special type of shaft Specially machined shafts are available. Please attach a sketch or drawing to your order. Specify dimensions on order form. standard BCB 18 HEX 1115' Switch on pos. 0 Shortened bush Please state dimension B Dimension B = min. 3,5 mm / max. 5,5 mm Specify dimensions on order form. 0,7 B 62 1 mm = 0.04 inch 1 inch = 25.4 mm Ordering code to Type 07 Options This code specifies the function of the switch 0 7 - X X X X Options - X X X X X X 0 = Standard E = BG 15 Pos. 0 - E D = BG 14 Pos. 0 - D C = BG 13 Pos. 0 - C Switch Type B = BG 12 Pos. 0 - B A = BG 11 Pos. 0 - A 9 = BG 10 Pos. 0 - 9 0 = horizontal (screwdriver actuation) 1 = horizontal with shaft 2 = vertical (screwdriver actuation) 3 = vertical with shaft 4 = horizontal FKS (Front panel operation) 8 = BG 9 Pos. 0 - 8 7 = BG 8 Pos. 0 - 7 6 = BG 7 Pos. 0 - 6 5 = BG 6 Pos. 0 - 5 4 = BG 5 Pos. 0 - 4 3 = BG 4 Pos. 0 - 3 2 = BG 3 Pos. 0 - 2 1 = BG 2 Pos. 0 - 1 (BG = special end stop) 0 = endless rotation 1 = with end stop 000 = Standard AL 12,8 Panel mounting AL 11,5mm 3 = BCD XXX = AL (shaft length) 4 = BCD - compl. z. B. AL 10,5 mm = 105 5 = Hex 6 = Hex - compl. 00 = Standard 7 = Gray-Code 20 = ZB (panel mounting) 30 = ZB / WD (panel mounting/waterproof) 3 = shorting 4 = non-shorting - = Standard V = Anti-static package T = 3,5 Ncm torque BG = Special end stop AL = Shaft length ZB = Panel mounting WD = Waterproof FKS = Front panel operation S = 3,5 Ncm torque and anti-static package 1 mm = 0.04 inch 1 inch = 25.4 mm 63 Order Form for Special Options for Coded Switches Type 07 Copy - Fill in - Fax Quote request Company Order Customer No. Address Phone Name Fax e-mail Quantity Requested delivery date Similar to order No. Function BCD BCD compl. (Indexing angle 36) Hex Hex. compl. (Indexing angle 22,5) Gray Code (Indexing angle 22,5) Shorting special stop Non-shorting from position Horizontal version Switching torque to position Vertical version with shaft without shaft Standard BCD 2,2 Ncm Standard Hex. 3,2 Ncm Special BCD/Hex. 3,5 Ncm Front panel operation (FKS) Panel mounting M6 x 0,75 (ZB) waterproof version (ZB/WD) IP protection degree.................... Special shaft length for panel mounting min.3 Machined shaft 0,1 standard BCD 18 HEX 1115' 2 o3 o3 min.1 0,1 max. 4 mm Special shaft length 0 0,7 B 2,25 AL 0,25 AL Standard 12,8 mm, max. 30 mm AL 0,25 Standard 5,5 min. 3,5 max. 5,5 AL Standard 11,5 mm, max. 26 mm (Drawing is valid for horizontal and vertical version) Sketch (additional technical requirements / comments) 64 1 mm = 0.04 inch 0,1 0,5 1 inch = 25.4 mm Switch in pos. 0