Washable Subminiature Antistatic Toggles Series B Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator's touch travels from actuator through the bushing and bracket to the PC board. Locking lever mechanism offered as a toggle option. Smooth, 6mm diameter bushing simplifies panel layout. Optional threaded, 6mm diameter bushing for panel seal mounting meets IP65 of IEC529 specifications (similar to NEMA 4 & 13). Totally sealed body construction prevents contact contamination and allows time- and money-saving soldering and washing. Ultrasonically welded terminals lock out flux and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see page Z2.) .100" x .100" terminal spacing conforms to standard PC board grids. Actual Size NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 www.nkkswitches.com 5-03 Washable Subminiature Antistatic Toggles Series B General Specifications Electrical Capacity (Resistive Load) 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: See Supplement Index (page Z2) to find explanation of operating range. Logic Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Angle of Throw: 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum for locking lever models 50,000 operations minimum Toggles A, A1, E & K w/Long Paddle: 150 grams (momentary); 120 grams (maintained) Toggles J & H & K w/Short Paddle: 278 grams (momentary); 188 grams (maintained) Toggle L: 60 grams Nonshorting 26 Materials & Finishes Toggle: Bushing: Gasket: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Nickel plated brass Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing Nitrile butadiene rubber Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Phosphor bronze or brass with gold plating Phosphor bronze with gold plating Environmental Data Operating Temp Range: Humidity: Vibration: Shock: -30C through +85C (-22F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: Soldering Time & Temperature: Process Seal: .30 ~ .45Nm (2.65 ~ 3.98 lb * in) for A1 actuator with threaded bushing only 3 seconds @ 350C or 5 seconds @ 270C See Supplement Index (page Z2) for specific processing data. Standards & Certifications Flammability Standards: UL Recognition or CSA Certification: UL94V-0 available The B Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 www.nkkswitches.com 5-03 Washable Subminiature Antistatic Toggles Series B TYPICAL SWITCH ORDERING EXAMPLE B 1 2 A B POLES 1 2 SPDT DPDT PC TERMINALS P Straight *B Straight with Bracket * H Right Angle with Bracket * V Vertical with Bracket W Straight Long * Bracketed models are ESD protected. CIRCUITS ON NONE ON ON OFF ON ON NONE (ON) (ON) NONE ON (ON) OFF (ON) ON OFF (ON) (ON) OFF ON ( ) = Momentary *Reverse circuits R & S available w/right angle & vertical only 2 3 5 *R 8 9 *S OPTIONAL CAPS TOGGLES A A1 J E H K L .394" Bat .315" Bat with Panel Seal Threaded Bushing (Straight PC only) .248" Bat .394" Flatted .248" Flatted Snap Top for A or B Paddle Locking Lever (with Circuits 2 & 3 only) G J .394" Bat Lever Cap .248" Bat Lever Cap PADDLES A B Short Paddle for K Toggle Long Paddle for K Toggle CAP COLORS DESCRIPTION FOR TYPICAL ORDERING EXAMPLE B12AB .394" Toggle A B C --------- PADDLE COLORS Black White Red Yellow Green Blue Gray A B C E F G H SPDT ON-NONE-ON Circuit Straight PC Terminals with Bracket NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 www.nkkswitches.com 5-03 Washable Subminiature Antistatic Toggles Series B POLES & CIRCUITS ( Toggle Position ) = Momentary Up Center Connected Terminals Down Up Center Throw & Schematics Down Note: Slot Pole Model SP B12 B13 B15 B1R B18 B19 B1S ON ON ON (ON) (ON) ON (ON) NONE OFF NONE NONE OFF OFF OFF ON ON (ON) ON (ON) (ON) ON 2-3 B22 B23 B25 B2R B28 B29 B2S ON ON ON (ON) (ON) ON (ON) NONE OFF NONE NONE OFF OFF OFF ON ON (ON) ON (ON) (ON) ON 2-3 5-6 DP Terminal numbers are not actually on the switch. Slot 2 (COM) OPEN 2-1 SPDT 1 OPEN 2-1 5-4 2 DPDT 1 3 5 (COM) 3 6 4 TOGGLES Standard Material & Finish: Brass with Bright Nickel A A1 .394" Bat .315" Bat with Panel Seal Threaded Bushing J E .248" Bat .394" Flatted 26 26 26 (2.6) Dia .102 (2.6) Dia .102 (10.0) .394 H (2.6) Dia .102 (8.0) .315 (10.0) .394 (6.3) .248 K .248" Flatted Snap Top for Paddles (2.7) .106 (1.6) .063 26 L Locking Lever 26 26 (1.6) .063 (6.3) .248 (4.5) Dia .177 (5.1) Dia .201 26 (2.6) .102 (2.5) .098 (5.0) .197 (12.5) .492 (11.5) .453 (5.9) .232 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 www.nkkswitches.com (5.8) .228 5-03 Series B Washable Subminiature Antistatic Toggles PC TERMINALS Use of a support bracket or placement of the round bushing in a panel cutout is recommended to increase PCB mounting stability. P B Straight H Straight with Bracket Right Angle with Bracket (10.16) .400 (2.54) Typ .100 (5.08) .200 (5.08) .200 (0.6) Typ .024 (0.6) Dia Typ .024 (5.08) .200 (3.1) Typ .122 V (2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (0.6) Dia Typ .024 (0.4) Typ .016 (2.54) Typ .100 (0.6) .024 (0.4) .016 (0.5) Typ .020 (3.1) .122 W Vertical with Bracket Straight Long (2.54) Typ .100 (0.6) Dia Typ .024 (5.08) .200 (0.5) Typ .020 (0.6) Dia Typ .024 (18.9) .744 (2.54) Typ .100 (0.6) .024 (0.4) .016 OPTIONAL CAPS G AT4003 .394" Bat Lever Cap J 26 (3.0) Dia .118 Material: PVC (11.0) .433 Colors Available: A, B, C AT4064 .248" Bat Lever Cap 26 Material: PVC (3.0) Dia .118 Colors Available: A, B, C (10.0) .394 (7.0) .276 (6.3) .248 PADDLES A AT467 Short Paddle B AT468 Long Paddle (4.4) .173 26 (4.6) .181 26 (5.0) .197 (2.4) .094 Material: Polyamide (10.3) .406 (9.4) .370 Colors Available: A, B, C, E, F, G, H Color Codes: A (2.4) .094 Material: Polyamide (15.1) .594 (14.2) .559 (5.0) Dia .197 Colors Available: A, B, C, E, F, G, H Black B White C Red E Yellow F Green NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 G Blue www.nkkswitches.com H Gray 5-03 Washable Subminiature Antistatic Toggles Series B TYPICAL SWITCH DIMENSIONS Straight PC Single Pole (0.6) Dia Typ .024 (2.6) Dia .102 (6.0) Dia .236 26 2 3 Slot (3.5) .138 (10.0) .394 (6.8) .268 (0.5) .020 (13.1) .516 (1.0) .039 1 1 (8.8) .346 2 3 (1.0) .039 (2.54) Typ .100 (3.1) .122 CL (2.54) Typ .100 (0.8) Dia Typ .031 CL B12AP Straight PC Double Pole (2.6) Dia .102 (6.0) Dia .236 (0.6) Dia Typ .024 26 Slot (3.5) .138 (10.0) .394 (8.8) .346 (0.8) .031 (13.1) .516 1 4 2 5 3 6 (8.8) .346 (5.08) .200 4 1 5 2 6 3 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) Typ .100 (3.1) .122 (5.08) .200 B22AP Straight PC * Bracket Single Pole (2.6) Dia .102 (6.0) Dia .236 (0.4) Typ .016 (0.6) Typ .024 1 (10.16) .400 26 Slot (0.6) Dia Typ .024 (6.0) .236 (8.0) .315 (2.7) .106 (10.0) .394 (0.5) .020 (13.1) .516 2 3 (2.54) Typ .100 (3.1) .122 (1.0) .039 1 (8.8) .346 (2.54) Typ .100 2 3 (1.0) .039 (2.54) .100 CL CL (0.8) Dia Typ .031 (2.54) .100 B12AB Straight PC * Bracket Double Pole (2.6) Dia .102 (6.0) Dia .236 (0.4) Typ .016 B22AB (6.0) .236 (8.8) .346 (2.7) .106 (10.0) .394 Right Angle PC (0.8) .031 (13.1) .516 1 4 2 5 3 6 (8.8) .346 1 5 2 6 3 (2.54) Typ .100 (0.8) Dia Typ .031 (0.6) Typ .024 (5.08) .200 (2.54) Typ .100 (3.1) .122 4 Single Pole (6.0) Dia .236 (3.4) .134 (2.6) Dia .102 3 Slot B12AH (5.08) .200 (10.16) .400 26 Slot (0.6) Dia Typ .024 (0.6) Typ .024 (5.08) .200 (2.7) .106 (10.0) .394 (0.4) .016 (13.9) .546 (3.1) .122 (5.08) .200 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 2 (8.8) .346 1 (7.3) .287 (0.6) Dia Typ .024 (2.54) Typ .100 www.nkkswitches.com (2.54) Typ .100 1 2 3 (5.08) .200 (0.8) Dia Typ .031 5-03 Washable Subminiature Antistatic Toggles Series B TYPICAL SWITCH DIMENSIONS Right Angle PC Double Pole (2.6) Dia .102 (6.0) Dia .236 3 (3.1) .122 Slot (0.6) Typ .024 (5.08) .200 B22AH (0.4) .016 (2.7) .106 (10.0) .394 (8.8) .346 Vertical PC (4.4) .173 (2.54) .100 (5.08) .200 (16.4) .646 2 6 1 5 4 (8.8) .346 1 2 (2.54) Typ .100 (2.54) 3 .100 4 5 6 (5.08) .200 (0.8) Dia Typ .031 (0.5) .020 (0.6) Dia Typ .024 (2.54) Typ .100 Single Pole (6.0) Dia .236 (2.6) Dia .102 (1.0) .039 (2.54) Typ .100 1 1 26 Slot (0.6) Typ .024 (2.54) .200 B12AV (1.0) .039 (2.7) .106 (8.0) .315 (10.0) .394 Vertical PC (0.4) .016 (5.08) .200 2 (4.4) .173 3 (0.5) (3.1) .020 .122 (2.54) Typ .100 (18.9) .746 (8.8) .346 2 3 (5.08) .200 (0.8) Dia Typ .031 CL (2.54) .100 (0.6) Dia Typ .024 (1.0) .039 CL Double Pole (2.6) Dia .102 (6.0) Dia .236 26 (2.7) .106 Slot (0.6) Typ .024 (5.08) .200 B22AV (1.0) .039 (8.8) .346 (10.0) .394 Locking Lever * Straight PC * Bracket (0.4) .016 (5.08) .200 (4.4) .173 1 4 2 5 3 6 (8.8) .346 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (5.08) .200 (0.5) (3.1) .020 .122 (2.54) Typ .100 (18.9) .746 4 (0.8) Dia Typ .031 (0.6) Dia Typ .024 (5.08) .200 Single Pole (6.0) .236 (4.5) Dia (5.1) Dia .177 .201 (0.4) Typ .016 (5.8) .228 (11.5) .453 (12.5) .492 (8.0) .315 1 (10.16) .400 26 Slot (0.6) Typ .024 (0.6) Dia Typ .024 (5.5) .217 (0.8) .031 (15.5) .610 2 3 (2.54) Typ .100 (3.1) .122 CL (1.0) .039 1 (8.8) .346 (1.0) .039 (2.54) .100 (2.54) Typ .100 2 3 CL (0.8) Dia Typ .031 (2.54) .100 B12LB Locking Lever * Straight PC * Bracket Double Pole (6.0) Dia .236 (4.5) Dia (5.1) Dia .177 .201 (0.4) Typ .016 (10.16) .400 26 Slot (5.68) .224 (8.85) .348 (0.6) Dia Typ .024 (5.8) .228 (11.5) .453 (12.5) .492 (5.5) .217 (0.8) .031 (15.5) .610 (2.54) Typ .100 (3.1) .122 (5.08) .200 1 4 2 5 3 6 (8.8) .346 4 1 5 2 6 3 (0.6) Typ .024 (5.08) .200 (2.54) Typ .100 (0.8) Dia Typ .031 B22LB NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 www.nkkswitches.com 5-03 Washable Subminiature Antistatic Toggles Series B TYPICAL SWITCH DIMENSIONS Threaded Bushing * Straight PC Panel Seal Single Pole (2.6) Dia .102 (0.6) Dia Typ .024 M6 P0.75 1 2 26 3 Slot (5.5) .217 (4.8) .189 (6.8) .268 (8.0) .315 (0.8) .031 (15.1) .594 (2.54) Typ .100 (3.1) .122 (1.0) .039 1 (8.8) .346 2 3 (1.0) .039 CL (2.54) Typ .100 (0.8) Dia Typ .031 CL B12A1P Threaded Bushing * Straight PC Panel Seal Double Pole (2.6) Dia .102 (0.6) Dia Typ .024 M6 P0.75 26 Slot (4.8) .189 (8.8) .346 (5.5) .217 (8.0) .315 (0.8) .031 (15.1) .594 (2.54) Typ .100 (3.1) .122 1 4 2 5 3 6 (8.8) .346 (2.54) Typ .100 4 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (0.8) Dia Typ .031 CL B22A1P STANDARD HARDWARE & PANEL CUTOUT AT513M Metric Hex Nut AT063 Gasket 1/4-40 Thd or M6 P0.75 Material: Brass, nickel plated (8.0) .315 Material: Nitrile butadiene rubber (6.2) (8.6) .244 .339 (5.0) .197 (4.9) .193 (6.9) .272 (9.0) .354 (1.5) .059 (6.0) .236 (1.3) .051 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 Maximum Panel Thickness with Standard Hardware: 2.2 mm (.087") www.nkkswitches.com 5-03