Original Creation Date: 06/20/95
Last Update Date: 12/10/96
Last Major Revision Date: 06/20/95
MNLF156-X REV 0BL MILITARY DATA SHEET
MONOLITHIC JFET INPUT OPERATIONAL AMPLIFIERS
NS Part Numbers
LF156H/883
Industry Part Number
LF156
Prime Die
LF156
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MNLF156-X REV 0BL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vio Input Offset
Voltage -5 5 mV 1
-7 7 mV 2, 3
Vcc = +20V -5 5 mV 1
Vcc = +20V -7 7 mV 2, 3
Iio Input Offset
Current Vcc = +20V -0.02 0.02 nA 1
Vcc = +20V -20 20 nA 2, 3
+Iib Input Bias
Current Vcc = +20V -0.1 0.1 nA 1
Vcc = +20V -10 50 nA 2, 3
Vcc = +20V, Vcm = -16V -0.1 0.1 nA 1
Vcc = +20V, Vcm = -16V -10 50 nA 2, 3
Vcc = +20V, Vcm = 16V -0.1 3.5 nA 1
Vcc = +20V, Vcm = 16V -10 60 nA 2, 3
-Iib Input Bias
Current Vcc = +20V -0.1 0.1 nA 1
Vcc = +20V -10 50 nA 2, 3
Vcc = +20V, Vcm = -16V -0.1 0.1 nA 1
Vcc = +20V, Vcm = -16V -10 50 nA 2, 3
Vcc = +20V, Vcm = 16V -0.1 3.5 nA 1
Vcc = +20V, Vcm = 16V -10 60 nA 2, 3
+PSRR Power Supply
Rejection Ratio +Vcc = 20V to 10V, -Vcc = -20V 85 dB 1, 2,
3
-PSRR Power Supply
Rejection Ratio -Vcc = -20V to -10V, +Vcc = 20V 85 dB 1, 2,
3
CMRR Common Mode
Rejection Ratio Vcm = +11V 85 dB 1, 2,
3
Icc Power Supply
Current 7mA1
14 mA 2, 3
+Ios Short Circuit
Current Vout = 0V -45 -15 mA 1
-35 -10 mA 2
-65 -15 mA 3
-Ios Short Circuit
Current Vout = 0V 15 45 mA 1
10 35 mA 2
15 65 mA 3
2
MNLF156-X REV 0BL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vcm Vcm Voltage Range 1 -11 11 V 1, 2,
3
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms
+Vop Output Voltage
Swing Rl = 10K Ohms 12 V 4, 5,
6
Rl = 2K Ohms 1 10 V 4, 5,
6
-Vop Output Voltage
Swing Rl = 10K Ohms -12 V 4, 5,
6
Rl = 2K Ohms 1 -10 V 4, 5,
6
Avs Large Signal
Voltage Gain Rl = 2K Ohms, Vout = 0 to 10V 50 V/mV 4
25 V/mV 5, 6
Rl = 2K Ohms, Vout = 0 to -10V 50 V/mV 4
25 V/mV 5, 6
Sr+ Slew Rate Av = 1 7.5 V/uS 9
DC PARAMETERS: DRIFT VALUES
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms. "Deltas not required on B-Level product. Deltas required for
S-Level product ONLY as specified on Internal Processing Instructions (IPI)."
Vio Input Offset
Voltage -1.2 1.2 mV 1
Icc Power Supply
Current -1 1 mA 1
Note 1: Parameter tested go-no-go only.
3
MILITARY DATA SHEET
MNLF156-X REV 0BL
Graphics and Diagrams
GRAPHICS# DESCRIPTION
05094HR (blank)
H08CRE (blank)
See attached graphics following this page.
4
