LBA110L Dual Single-Pole, Combination OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 350 120 35 Units VP mArms / mADC Features * 3750Vrms Input/Output Isolation * Normally Open Relay is a Current-Limiting Device * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Small 8-Pin Package * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Versions Available Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Description LBA110L is a combination device comprising one normally open (1-Form-A) and one normally closed (1-Form-B) solid state relays. Both relays are independent, 350V, 120mA, 35 devices designed to provide an ideal solution where a complementary relay pair (1-Form-A / 1-Form-B) is required. The normally open (1-Form-A) relay is configured as a current-limiting device. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 10 05 49410 004 Ordering Information Part # LBA110L LBA110PL Description 8-Pin DIP (50/Tube) 8-Pin Flatpack (50/Tube) LBA110PLTR 8-Pin Flatpack (1000/Reel) LBA110LS 8-Pin Surface Mount (50/Tube) LBA110LSTR 8-Pin Surface Mount (1,000/Reel) Pin Configuration + Control - Normally Closed - Control - Normally Closed + Control - Normally Open - Control - Normally Open 1 8 2 7 3 6 4 5 Switching Characteristics of Normally Open (Form A) Devices Form-B IF IF ILOAD 90% ton Pb DS-LBA110L-R06 Normally Open Pole Switching Characteristics of Normally Closed (Form B) Devices Form-A ILOAD Normally Closed Pole 90% 10% 10% toff toff ton e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LBA110L Absolute Maximum Ratings @ 25C Parameter Ratings Blocking Voltage 350 Reverse Input Voltage 5 Input Control Current 50 Peak (10ms) 1 1 Input Power Dissipation 150 800 Total Power Dissipation 2 Isolation Voltage, Input to Output 3750 Operational Temperature -40 to +85 Storage Temperature -40 to +125 1 2 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate linearly 1.33 mW / C Derate linearly 6.67 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak (1-Form-B Relay Only) Load Current Limiting (1-Form-A Relay Only) On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 1 2 2 Conditions Symbol Min Typ Max Units t =10ms IL=120mA VL=350VP IL ILPK ICL RON ILEAK 130 - 170 23 - 120 350 210 35 1 mArms / mADC mAP mA VL=50V, f=1MHz ton toff COUT - 25 3 3 - IL=120mA IF=5mA VR=5V IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V A ms pF If both poles operate, then the load current must be derated so as not to exceed the package power dissipation value. Measurement taken within one (1) second of on-time. www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LBA110L Form-A/Form-B PERFORMANCE DATA @25C (Unless Otherwise Noted)* Device Count (N) 30 25 20 15 10 5 0 1.17 Typical Leakage vs. Temperature Measured Across Pins 5&6 or 7&8 1.8 0.030 1.6 0.025 Leakage (PA) LED Forward Voltage Drop (V) 35 Typical LED Forward Voltage Drop vs. Temperature Typical LED Forward Voltage Drop (N=50, IF=5mA) 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.020 0.015 0.010 0.005 0.8 -40 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) -20 0 20 40 60 80 Temperature (C) 100 0 -40 120 -20 0 20 40 60 80 100 Temperature (C) Form-A RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-A Typical Turn-On Time (N=50, IF=5mA, IL=120mADC) 25 15 10 5 0 15 10 5 0.65 20 25 15 10 5 0.08 0.13 0.18 Turn-Off Time (ms) 0.5 0.7 0.9 1.1 1.3 LED Current (mA) 1.5 15 10 15.8 0.23 Form-A Typical IF for Switch Dropout (N=50, IL=120mADC) 16.1 16.4 16.7 17.0 17.3 On-Resistance (:) 17.6 Form-A Typical Blocking Voltage Distribution (N=50) 35 30 20 15 10 5 25 20 15 10 5 0 0 20 0 0.03 Form-A Typical IF for Switch Operation (N=50, IL=120mADC) 25 5 Device Count (N) 0.35 0.45 0.55 Turn-On Time (ms) Device Count (N) Device Count (N) 0.25 Form-A Typical On-Resistance Distribution (N=50, IF=5mA, IL=120mADC) 30 20 0 0.15 25 35 Device Count (N) 20 Device Count (N) Device Count (N) 25 Form-A Typical Turn-Off Time (N=50, IF=5mA, IL=120mADC) 0 0.15 0.45 0.75 1.05 1.35 LED Current (mA) 1.65 1.95 376.8 378.3 379.8 381.3 382.8 384.3 385.8 Blocking Voltage (VP) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LBA110L Form-A PERFORMANCE DATA @25C (Unless Otherwise Noted)* FormA Typical Turn-On Time vs. LED Forward Current (IL=120mADC) 0.092 20 0.25 0.20 0.088 On-Resistance (:) 0.30 0.15 0.086 0.084 0.082 0.080 0.078 0.074 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 Form-A Typical Turn-On Time vs. Temperature (IL=120mADC) 0.50 0.45 0.40 Turn-Off TIme (ms) IF=5mA IF=10mA 0.35 0.30 0.25 IF=20mA 0.20 0.15 -40 -20 0 20 40 60 Temperature (C) 80 10 15 20 25 30 35 40 LED Forward Current (mA) 45 14 12 50 -40 Form-A Typical Turn-Off Time vs. Temperature (IF=5mA, IL=120mADC) -20 0 20 40 60 Temperature (C) 80 100 Form A Maximum Load Current vs. Temperature 180 160 140 120 100 IF=20mA IF=10mA IF=5mA 80 60 40 20 0 -40 Form-A Typical IF for Switch Operation vs. Temperature (IL=120mADC) 2.5 5 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 100 16 8 0 Load Current (mA) 0 18 10 0.076 0.10 Turn-On Time (ms) Form-A Typical On-Resistance vs. Temperature (IF=5mA, IL=120mADC) 0.090 0.35 Turn-Off Time (ms) Turn-On Time (ms) 0.40 Form-A Typical Turn-Off Time vs. LED Forward Current (IL=120mADC) -20 0 20 40 60 Temperature (C) 80 -40 100 Form-A Typical IF for Switch Dropout vs. Temperature (IL=120mADC) -20 0 20 40 60 80 Temperature (C) 100 120 80 100 Form-A Typical Blocking Voltage vs. Temperature 400 2.5 1.5 1.0 0.5 Blocking Voltage (VP) LED Current (mA) LED Current (mA) 395 2.0 2.0 1.5 1.0 0.5 390 385 380 375 370 365 360 0 355 0 -20 0 20 40 60 Temperature (C) Load Current (mA) 150 80 100 -40 -20 0 20 40 60 Temperature (C) 100 50 0 -50 -100 -150 -2.0 80 100 -40 -20 0 20 40 60 Temperature (C) Form-A Typical Current Limiting Characteristics vs. Temperature (IF=5mA) Form-A Typical Load Current vs. Load Voltage (IF=5mA) 250 Current Limit (mA) -40 200 150 100 50 0 -1.5 -1.0 -0.5 0 0.5 1.0 Load Voltage (V) 1.5 2.0 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LBA110L Form-B PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-B Typical Turn-On Time (N=50, IF=5mA, IL=120mADC) 30 30 30 15 10 5 Device Count (N) 20 20 15 10 20 15 10 5 5 0 0 0 0.14 0.18 0.22 0.26 Turn-On Time (ms) 0.30 0.25 Form-B Typical IF for Switch Operation (N=50, IL=120mADC) 30 Device Count (N) 20 15 10 5 27.8 0.75 Form-B Typical IF for Switch Dropout (N=50, IL=120mADC) 25 25 0.35 0.45 0.55 0.65 Turn-Off Time (ms) 0.7 1.1 1.3 1.5 LED Current (mA) 15 10 5 20 15 10 5 0 0.35 0.45 0.55 0.65 0.75 LED Current (mA) 0.85 0.95 386.3 388.8 391.3 393.8 396.3 398.8 401.3 Blocking Voltage (VP) Form-B Typical Turn-Off Time vs. LED Forward Current (IL=120mADC) 0.7 0.25 Form-B Typical On-Resistance vs. Temperature (IF=5mA, IL=120mADC) 60 0.15 0.10 On-Resistance (:) Turn-Off Time (ms) Turn-On Time (ms) 0.6 0.20 0.5 0.4 0.3 0.2 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 FormB Typical Turn-On Time vs. Temperature (IF=5mA, IL=120mADC) 0.35 5 10 15 20 25 30 35 40 LED Forward Current (mA) 30 20 50 45 -40 Form-B Typical Turn-Off Time vs. Temperature (IL=120mADC) 0.7 -20 0 20 40 60 Temperature (C) 80 100 Form-B Maximum Load Current vs. Temperature (IF=5mA) 180 Turn-Off Time (ms) 0.25 0.20 0.15 0.10 0.6 0.5 0.4 IF=20mA 0.2 0 0.1 -20 0 20 40 60 Temperature (C) 80 100 IF=10mA 0.3 0.05 -40 IF=5mA Load Current (mA) 160 0.30 Turn-On Time (ms) 40 0 0 50 50 10 0.1 0.05 32.0 25 20 1.9 Form-B Typical Turn-On Time vs. LED Forward Current (IL=120mADC) 29.2 29.9 30.6 31.3 On-Resistance (:) 30 0 0 28.5 Form-B Typical Blocking Voltage Distribution (N=50) Device Count (N) 0.10 Form-B Typical On-Resistance Distribution (N=50, IF=5mA, IL=120mADC) 25 25 Device Count (N) Device Count (N) 25 Device Count (N) Form-B Typical Turn-Off Time (N=50, IF=5mA, IL=120mADC) 140 120 100 80 60 40 20 0 -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 80 Temperature (C) 100 120 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LBA110L Form-B PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-B Typical IF for Switch Operation vs. Temperature (IL=120mADC) 3.0 3.0 Form-B Typical Blocking Voltage vs. Temperature 2.0 1.5 1.0 0.5 Blocking Voltage (VP) 2.5 LED Current (mA) 2.5 LED Current (mA) Form-B Typical IF for Switch Dropout vs. Temperature (IL=120mADC) 2.0 1.5 1.0 0.5 0 0 -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 Temperature (C) Form-B Typical Load Current vs. Load Voltage (IF=5mA) Load Current (A) Load Current (mA) 100 0 -50 -100 -150 -4 -3 -2 -1 0 1 Load Voltage (V) 2 3 4 100 -40 -20 0 20 40 60 Temperature (C) 80 100 Form-B Energy Rating Curve 150 50 80 410 405 400 395 390 385 380 375 370 365 360 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 6 www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LBA110L Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LBA110L / LBA110LS / LBA110PL MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LBA110L / LBA110LS 250C for 30 seconds LBA110PL 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R06 e3 www.ixysic.com 7 INTEGRATED CIRCUITS DIVISION LBA110L MECHANICAL DIMENSIONS LBA110L 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) 0.457 0.076 (0.018 0.003) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 0.127 (0.300 0.005) 0.254 0.0127 (0.010 0.0005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LBA110LS 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) Pin 1 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LBA110PL 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 0.127 (0.370 0.005) Pin 1 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 0.013 (0.008 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 0.025 (0.085 0.001) 0.457 0.076 (0.018 0.003) 0.864 0.120 (0.034 0.004) 8 PCB Land Pattern Dimensions mm (inches) www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LBA110L MECHANICAL DIMENSIONS LBA110LSTR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=16.00 (0.63) Bo=10.30 (0.406) K0 =4.90 (0.193) Ao=10.30 (0.406) P=12.00 (0.472) K1 =4.20 (0.165) Embossed Carrier Embossment User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 LBA110PLTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Embossment W = 16.00 (0.63) 7.50 (0.295) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) P = 12.00 (0.472) User Direction of Feed Ao = 10.30 (0.406) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 9 Specification: DS-LBA110L-R06 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: LBA110L LBA110LS LBA110LSTR LBA110P LBA110PTR LBA110STR LBA110S LBA110 LBA110PLTR