SEMiX303GB12E4s Absolute Maximum Ratings Symbol Conditions Values Unit IGBT VCES IC Tj = 175 C 1200 V Tc = 25 C 466 A Tc = 80 C 359 A 300 A ICnom ICRM SEMiX(R) 3s Trench IGBT Modules SEMiX303GB12E4s VGES tpsc Tj ICRM = 3xICnom VCC = 800 V VGE 20 V VCES 1200 V 900 A -20 ... 20 V 10 s -40 ... 175 C Tc = 25 C 338 A Tc = 80 C 252 A 300 A Tj = 150 C Inverse diode IF Tj = 175 C IFnom Features * Homogeneous Si * Trench = Trenchgate technology * VCE(sat) with positive temperature coefficient * High short circuit capability * UL recognized, file no. E63532 Typical Applications* * AC inverter drives * UPS * Electronic Welding Remarks * Case temperature limited to TC=125C max. * Product reliability results are valid for Tj=150C * Dynamic values apply to the following combination of resistors: RGon,main = 1,0 RGoff,main = 1,0 RG,X = 2,0 RE,X = 0,5 IFRM IFRM = 3xIFnom 900 A IFSM tp = 10 ms, sin 180, Tj = 25 C 1485 A -40 ... 175 C Tj Module It(RMS) Tterminal = 80 C Tstg Visol AC sinus 50Hz, t = 1 min 600 A -40 ... 125 C 4000 V Characteristics Symbol IGBT VCE(sat) VCE0 rCE Conditions IC = 300 A VGE = 15 V chiplevel VGE = 15 V min. typ. max. Unit Tj = 25 C 1.8 2.05 V Tj = 150 C 2.2 2.4 V Tj = 25 C 0.8 0.9 V Tj = 150 C 0.7 0.8 V Tj = 25 C 3.3 3.8 m 5.0 5.3 m 5.8 6.5 V 0.1 0.3 mA Tj = 150 C VGE(th) VGE=VCE, IC = 11.4 mA ICES VGE = 0 V VCE = 1200 V Cies Coes Cres VCE = 25 V VGE = 0 V QG VGE = - 8 V...+ 15 V RGint Tj = 25 C VCC = 600 V IC = 300 A VGE = 15 V RG on = 1.8 RG off = 1.8 di/dton = 5250 A/s di/dtoff = 2825 A/s td(on) tr Eon td(off) tf Eoff Rth(j-c) Tj = 25 C 5 Tj = 150 C mA f = 1 MHz 18.5 nF f = 1 MHz 1.22 nF f = 1 MHz 1.03 nF 1695 nC 2.50 Tj = 150 C 255 ns Tj = 150 C 57 ns Tj = 150 C 30 mJ Tj = 150 C 565 ns Tj = 150 C 98 ns Tj = 150 C 41.2 mJ per IGBT 0.095 K/W GB (c) by SEMIKRON Rev. 1 - 05.01.2011 1 SEMiX303GB12E4s Characteristics Symbol Conditions Inverse diode VF = VEC IF = 300 A VGE = 0 V chip VF0 rF SEMiX(R) 3s Trench IGBT Modules SEMiX303GB12E4s IRRM Qrr Err Rth(j-c) * Homogeneous Si * Trench = Trenchgate technology * VCE(sat) with positive temperature coefficient * High short circuit capability * UL recognized, file no. E63532 Typical Applications* * AC inverter drives * UPS * Electronic Welding Tj = 25 C Tj = 150 C typ. max. Unit 2.2 2.52 V 2.2 2.5 V Tj = 25 C 1.1 1.3 1.5 V Tj = 150 C 0.7 0.9 1.1 V Tj = 25 C 2.7 3.0 3.4 m 4.2 4.6 m Tj = 150 C IF = 300 A Tj = 150 C di/dtoff = 5100 A/s T = 150 C j VGE = -15 V T j = 150 C VCC = 600 V per diode 3.5 300 A 44.2 C 17.7 mJ 0.18 K/W Module LCE RCC'+EE' Features min. res., terminal-chip Rth(c-s) per module Ms to heat sink (M5) 20 nH TC = 25 C 0.7 m TC = 125 C 1 m 0.04 to terminals (M6) Mt K/W 3 5 2.5 5 Nm Nm Nm w 300 g Temperatur Sensor R100 Tc=100C (R25=5 k) B100/125 R(T)=R100exp[B100/125(1/T-1/T100)]; T[K]; 493 5% 3550 2% K Remarks * Case temperature limited to TC=125C max. * Product reliability results are valid for Tj=150C * Dynamic values apply to the following combination of resistors: RGon,main = 1,0 RGoff,main = 1,0 RG,X = 2,0 RE,X = 0,5 GB 2 Rev. 1 - 05.01.2011 (c) by SEMIKRON SEMiX303GB12E4s Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic (c) by SEMIKRON Rev. 1 - 05.01.2011 3 SEMiX303GB12E4s Fig. 7: Typ. switching times vs. IC Fig. 8: Typ. switching times vs. gate resistor RG Fig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. RCC'+EE' Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge 4 Rev. 1 - 05.01.2011 (c) by SEMIKRON SEMiX303GB12E4s SEMiX 3s spring configuration This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. (c) by SEMIKRON Rev. 1 - 05.01.2011 5