Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. DW04DW117

Cordset Configuration

End 1 M12M 90 Degree

End 2 M12M 90 Degree

Conductor 24 (7/32) AWG TC

Jacket TPE

Jacket Color TEAL

OD 0.246

Insulation 0.008" Wall, Nom. PO

Insulation Colors White/Orange & Orange, White/Green & Green

Applicable Specifications

Cordset Applicable Specifications

Ingress Protection IP68

REACH Regulation (EC 1907/2006):

This product does not contain Substances of Very High Concern (SVHC) listed on the European Union's REACH candidate list in excess of 0.1%

mass of the item. For up-to-date information, please see Alpha's REACH SVHC Declaration.

Physical & Mechanical Properties

Temperature Range -40 to 75°C

Bend Radius 9X Cable Diameter

Pull Tension 40 Lbs, Maximum

Available Lengths

401- 20 Meters

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications

described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not

ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or

implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,

even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out

of or in connection with the use, or inability to use, the information or specifications described herein.

EU/China ROHS CERTIFICATE OF COMPLIANCE

To Whom It May Concern:

Alpha Wire Part Number: DW04DW117

DW04DW117 , RoHS-Compliant Commencing With 9/21/2016 Production

Note: all colors and put-ups

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European

Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous

substances used in the manufacture of electrical and electronic equipment. This certification extends to amending Directive 2015/863/EU which

expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The reader is referred to these Directives for the specific

definitions and extents of the Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed

Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)

Polybrominated Diphenyl Ethers (PBDE) ,

Including Deca-BDE 0.1% by weight (1000 ppm)

Bis(2-ethylhexyl) phthalate (DEHP) 0.1% by weight (1000 ppm)

Butyl benzyl phthalate (BBP) 0.1% by weight (1000 ppm)

Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)

Diisobutyl phthalate (DIBP) 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its

release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or

the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is

Elizabeth, NJ 07207

Tel: 1-908-925-8000