SFH615AGR-X001 - Vishay Semiconductors

SFH615AA, SFH615AGB, SFH615AGR, SFH615AY

www.vishay.com Vishay Semiconductors

Rev. 2.0, 21-Feb-18 1Document Number: 83672

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS

DESCRIPTION

The SFH615XXX features a large assortment of current

transfer ratio, low coupling capacitance and high isolation

voltage. These couplers have a GaAs infrared emitting diode

emitter, which is optically coupled to a silicon planar

phototransistor detector, and is incorporated in a plastic

DIP-4 package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

The couplers are end-stackable with 2.54 mm lead spacing.

Creepage and clearance distances of > 8 mm are achieved

with option 6. This version complies with 60950

(DIN VDE 0805) for reinforced insulation up to operation

voltage of 400 VRMS or DC.

FEATURES

• Low CTR degradation

• Good CTR linearity depending on forward

current

• Isolation test voltage, 5300 VRMS

• High collector emitter voltage, VCEO = 70 V

• Low saturation voltage

• Fast switching times

• Temperature stable

• Low coupling capacitance

• End stackable, 0.100" (2.54 mm) spacing

• High common mode interference immunity (unconnected

base)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

AGENCY APPROVALS

• UL1577

•cUL

• DIN EN 60747-5-5 (VDE 0884) available with option 1

•BSI

Notes

• Additional options may be possible, please contact sales office

(1) Also available in tubes; do not add T to end

i179060_1

i179060

ORDERING INFORMATION

SFH615AxxX00#

PART NUMBER PACKAGE OPTION

AGENCY

CERTIFIED/PACKAGE

CTR (%)

5 mA

UL, cUL, BSI, FIMKO 50 to 600 100 to 600 100 to 300 50 to 150

DIP-4 SFH615AA SFH615AGB SFH615AGR SFH615AY

DIP-4, 400 mil, option 6 SFH615AA-X006 - - -

SMD-4, option 7 SFH615AA-X007 - SFH615AGR-X007T SFH615AY-X007T

SMD-4, option 8 - - - SFH615AY-X008T

SMD-4, option 9 - SFH615AGB-X009T - SFH615AY-X009T (1)

UL, cUL, VDE, BSI, FIMKO 50 to 600 100 to 600 100 to 300 50 to 150

DIP-4 SFH615AA-X001 - SFH615AGR-X001 -

DIP-4, 400 mil, option 6 - - SFH615AGR-X016 SFH615AY-X016

SMD-4, option 7 SFH615AA-X017T (1) - SFH615AGR-X017T (1) -

SMD-4, option 8 - - - SFH615AY-X018T (1)

SMD-4, option 9 - - - SFH615AY-X019T (1)

7.62 mm

DIP-#

> 0.7 mm

Option 7

10.16 mm

Option 6

> 0.1 mm

Option 9

9.27 mm

Option 8

SFH615AA, SFH615AGB, SFH615AGR, SFH615AY

www.vishay.com Vishay Semiconductors

Rev. 2.0, 21-Feb-18 2Document Number: 83672

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

maximum ratings for extended periods of the time can adversely affect reliability.

(1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through

hole devices (DIP).

Note

• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Reverse voltage VR6V

DC forward current IF60 mA

Surge forward current tP  10 ms IFSM 2.5 A

Power dissipation Pdiss 100 mW

OUTPUT

Collector emitter voltage VCEO 70 V

Emitter collector voltage VECO 7V

Collector current IC50 mA

tP  10 ms IC100 mA

Total power dissipation Pdiss 150 mW

COUPLER

Isolation test voltage

between emitter and detector VISO 5300 VRMS

Creepage distance 7mm

Clearance distance 7mm

Isolation thickness between emitter 

and detector Comparative tracking

index per DIN IEC 112/VDE 0303, part 1

CTI 175

Isolation resistance VIO = 500 V, Tamb = 25 °C RIO 1012 

VIO = 500 V, Tamb = 100 °C RIO 1011 

Storage temperature range Tstg -55 to +150 °C

Ambient temperature range Tamb -55 to +100 °C

Soldering temperature (1) max. 10 s, dip soldering distance

to seating plane  1.5 mm Tsld 260 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

INPUT

Forward voltage IF = 60 mA VF- 1.25 1.65 V

Reverse current VR = 6 V IR-0.0110μA

Capacitance VR = 0 V, f = 1 MHz CO-13-pF

Thermal resistance Rthja - 750 - K/W

OUTPUT

Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE -5.2-pF

Thermal resistance Rthja - 500 - K/W

Collector emitter saturation

voltage IF = 10 mA, IC = 2.5 mA VCEsat - 0.25 0.4 V

Coupling capacitance CC-0.4-pF

COUPLER

Collector emitter leakage

current VCEO = 10 V

SFH615AA ICEO -10100nA

SFH615AGB ICEO -10100nA

SFH615AGR ICEO -10100nA

SFH615AY ICEO -10100nA

SFH615AA, SFH615AGB, SFH615AGR, SFH615AY

www.vishay.com Vishay Semiconductors

Rev. 2.0, 21-Feb-18 3Document Number: 83672

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Fig. 1 - Switching Operation (with saturation)

Fig. 2 - Current Transfer Ratio (typ.) vs. Temperature

Fig. 3 - Transistor Capacitance (typ.) vs. Collector Emitter Voltage

Fig. 4 - Permissible Diode Forward Current vs.

Ambient Temperature

CURRENT TRANSFER RATIO

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

IC/IFIF = 5 mA, VCE = 5 V

SFH615AA CTR 50 - 600 %

SFH615AGB CTR 100 - 600 %

SFH615AGR CTR 100 - 300 %

SFH615AY CTR 50 - 150 %

SWITCHING CHARACTERISTICS

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Turn-on time IF = 5 mA ton -2-μs

Turn-off time IF = 5 mA toff -25-μs

isfh615aa_01

1kΩ

VCC =5V

47 Ω

- 25 7525050°C

isfh615aa_02

IF = 10 mA, VCC = 5.0 V

10-2 10-1 100101102

isfh615aa_03

f = 1.0 MHz

CCE

120

0 50 1007525 °C

isfh615aa_04

SFH615AA, SFH615AGB, SFH615AGR, SFH615AY

www.vishay.com Vishay Semiconductors

Rev. 2.0, 21-Feb-18 4Document Number: 83672

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Output Characteristics (typ.) Collector Current vs.

Collector Emitter Voltage

Fig. 6 - Permissible Pulse Handling Capability Forward Current vs.

Pulse Width

Fig. 7 - Diode Forward Voltage (typ.) vs. Forward Current

Fig. 8 - Permissible Power Dissipation vs. Temperature

015105V

isfh615aa_05

= 14 mA

= 12 mA

= 10 mA

= 6 mA

= 8 mA

= 4 mA

= 2 mAI

= 1 mA

101

102

103

104

10-5 10-4 10-3 10-2 10-1 100101

isfh615aa_06

D =

D = 0

0.005

0.01

0.02 Pulse cycle

D = parameter

0.05

0.1

0.2

0.5

1.2

1.1

1.0

0.9

-1

5 mA5510

isfh615aa_07

25 °C

50 °C

75 °C

100

150

200

0 50 1007525 °C

tot

isfh615aa_08

Transistor

Diode

SFH615AA, SFH615AGB, SFH615AGR, SFH615AY

www.vishay.com Vishay Semiconductors

Rev. 2.0, 21-Feb-18 5Document Number: 83672

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in inches (millimeters)

i178027

6.48

6.81

4.55

4.83

Pin one ID

0.76

1.14

4°

typ.

2.54

3.30

3.81

0.508

0.89

10°

0° to 15°

0.46

0.56

0.2

0.3

0.79 typ.

1.27 typ.

7.62 typ.

2.79

3.30

5.84

6.35

1.27

ISO method A

15° max.

Option 9

18486

9.53

10.03

7.62 ref.

0.51

1.02

8 min.

0.102

0.249

0.25 typ.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

SFH615AA SFH615AGB SFH615AGR SFH615AA-X001 SFH615AA-X006 SFH615AA-X007 SFH615AA-X017

SFH615AA-X017T SFH615ABL SFH615ABM SFH615ABM-X006 SFH615ABM-X007T SFH615ABM-X016

SFH615AGB-X006 SFH615AGB-X009 SFH615AGB-X009T SFH615AGB-X016 SFH615AGR-X001 SFH615AGR-

X016 SFH615AGR-X017 SFH615AGR-X017T SFH615AY SFH615AY-X008T SFH615AY-X009 SFH615AY-X009T

SFH615AY-X016 SFH615AY-X018 SFH615AY-X018T SFH615AY-X019 SFH615AY-X019T SFH615AGR-X007T

SFH615AY-X007T