FD 1.8~3.3V CMOS Low Jitter FD Series Seam Sealed Crystal Clock Oscillator Product Description Dimensions (UNIT: mm) The FD Series could working with 1.8~3.3V that achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 5.0x3.2mm surfacemount ceramic package. Footprint (UNIT: mm) 5.00.15 1.7 1.5 3.20.15 2.2 PIN 1 2.54 1.20.15 Product Features Less than 1.5ps RMS jitter with fundamental or overtone design 1.8~3.3V CMOS compatible logic levels Pin-compatible with standard 5.0x3.2mm packages Designed for standard reflow and washing techniques Low power standby mode Available on tape & reel; 1000pcs/reel Pb-free and RoHS/Green compliant 0.8 1.2 #1 #2 #4 #3 External high-frequency power decoupling is recommended. (See test circuit for minimum recommendation). To ensure optimal performance, do not route traces beneath the package. 0.9 2.1 2.5 (Bottom View) Pin Functions Applications Pin Function The FD Series is an ideal reference clock for compact, high-density applications requiring low jitter or tight stability, including: #1 OE Function #2 Ground #3 Clock Output #4 VCC Ethernet Fiber Channel Serial Attached SCSI (SAS) Server & Storage platforms SONET/SDH line cards T1/E1, T3/E3 line cards DSLAM 802.11a/b/g WiFi Scale: None. Dimensions ar in mm Part Number Example F D 2 5 0 0 0 0 1 A B C A: Product series B: Digit of frequency C: Internal specification TM (R) SaRonix-eCERA is a Pericom 1 Semiconductor Corporation Company * 886-3-451-8888 * http://www.saronix-ecera.com.tw All specifications are subject to change without notice. Rev01. 06/11/07 FD 1.8~3.3V CMOS Low Jitter FD Series Seam Sealed Crystal Clock Oscillator Electrical Performance Parameter Min. Output frequency Supply voltage Typ. Max. Units 1 125 MHz 1.8 3.3 V Notes As specified 10 Supply current, output enabled 1 to <40 MHz 20 40 to 75 MHz mA 30 Supply current, standby mode 10 Frequency stability 20 Operating temperature -40 50 A ppm Output Hi-Z C As specified +85 10% V DD Output logic 0, VOL Output logic 1, VOH >75 to <125 MHz V 90% VDD Output load V 15 30 pF % 40 to <80 MHz 55 5 3 80 to 125 MHz 2 Jitter, Phase up to <80 MHz 1.5 80 to 125 MHz 1 Jitter, Accumulated up to <80 MHz 80 to 125 MHz 5 Jitter, Total up to <80 MHz 50 80 to 125 MHz 30 Duty cycle Rise and fall time See Note 1 below 45 1 to 40 MHz 3 ns 0.1VDD to 0.9VDD or 0.9VDD to 0.1VDD ps RMS (1-) 10 kHz to 20 MHz frequency band ps RMS (1-) 20.000 adjacent periods ps pk-pk 100.000 random periods Notes: 1. As specified. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Internal pullup resistance Output disable delay Output enable delay (R) Units Notes V or open 0.3VDD V Output is Hi-Z 100 10 k ohm ns ms 50 SaRonix-eCERA is a Pericom 2 Max. 0.7VDD Input voltage (pin 1), Output Disable (low power standby) TM Typ. Semiconductor Corporation Company * 886-3-451-8888 * http://www.saronix-ecera.com.tw All specifications are subject to change without notice. Rev01. 06/11/07 FD 1.8~3.3V CMOS Low Jitter FD Series Seam Sealed Crystal Clock Oscillator Absolute Maximum Ratings Parameter Min. Storage temperature Typ. -55 Max. Units +125 C Notes Test Circuit Test Point 4 3 1 2 Power Supply 0.1F or 0.01F 15 pF , 30pF or 50pF (Including probe and fixture capacitance) Output Enable / Disable Function Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Environmental Environmental Environmental Environmental Shock Solderability Terminal strength Gross leak Fine leak Solvent resistance Thermal shock Moisture resistance Vibration Resistance to soldering heat TM (R) SaRonix-eCERA is a Pericom 3 Test Condition MIL-STD-883, Method 2002, Condition B JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Condition D MIL-STD-883, Method 1014, Condition C -8 MIL-STD-883, Method 1014, Condition A2 (R= 1 2x10 atm cc/s) MIL-STD-202, Method 215 MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2007, Condition A J-STD-020C Table 5-2 Pb-free devices (2 cycles max) Semiconductor Corporation Company * 886-3-451-8888 * http://www.saronix-ecera.com.tw All specifications are subject to change without notice. Rev01. 06/11/07 FD 1.8~3.3V CMOS Low Jitter FD Series Seam Sealed Crystal Clock Oscillator Output Waveform tf tr VOH 90% 50% 10% VOL tA tB Duty cycle=100% x (tA) / (tA+tB) Refow Soldering Profle Temperature oc As per IPC/JEDEC J-STD-020C 260 10 Sec 220 160 60~120 Sec 60 Sec Second TM (R) SaRonix-eCERA is a Pericom 4 Semiconductor Corporation Company * 886-3-451-8888 * http://www.saronix-ecera.com.tw All specifications are subject to change without notice. Rev01. 06/11/07 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pericom: FDC500026 FD4000113