5KP8.5A thru 5KP188A www.vishay.com Vishay General Semiconductor TRANSZORB(R) Transient Voltage Suppressors FEATURES * P600 glass passivated chip junction * Available in uni-directional polarity only * 5000 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % * Excellent clamping capability * Very fast response time P600 * Low incremental surge resistance * Solder dip 275 C max. 10 s, per JESD 22-B106 * AEC-Q101 qualified * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. PRIMARY CHARACTERISTICS VWM 8.5 V to 188 V VBR 9.4 V to 231 V PPPM 5000 W PD 8.0 W IFSM 500 A TJ max. 175 C Polarity Uni-directional Package P600 MECHANICAL DATA Case: Molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 s waveform Peak pulse current with a 10/1000 s waveform (1) (1) Power dissipation on infinite heatsink at TL = 75 C (fig. 5) Peak forward surge current 8.3 ms single half sine-wave (fig. 5) Instantaneous forward voltage at 100 A (2) Operating junction and storage temperature range SYMBOL LIMIT UNIT PPPM 5000 W IPPM See next table A PD 8.0 W IFSM 600 A VF 3.5 V TJ, TSTG -55 to +175 C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Measured 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Revision: 24-Jun-14 Document Number: 88308 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5KP8.5A thru 5KP188A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (JEDEC REGISTERED DATA) (TA = 25 C unless otherwise noted) DEVICE TYPE BREAKDOWN VOLTAGE VBR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (A) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMP. COEFFICIENT OF VBR (%/C) MIN. MAX. 5KP8.5A 9.44 10.4 5.0 8.5 50 347 14.4 0.078 5KP9.0A 10.0 11.1 5.0 9.0 20 325 15.4 0.081 5KP10A 11.1 12.3 5.0 10.0 15 294 17.0 0.084 5KP11A 12.2 13.5 5.0 11.0 10 275 18.2 0.086 5KP12A 13.3 14.7 5.0 12.0 5.0 251 19.9 0.088 5KP13A 14.4 15.9 5.0 13.0 2.0 233 21.5 0.090 5KP14A 15.6 17.2 5.0 14.0 2.0 216 23.2 0.092 5KP15A 16.7 18.5 5.0 15.0 2.0 205 24.4 0.094 5KP16A 17.8 19.7 5.0 16.0 2.0 192 26.0 0.096 5KP17A 18.9 20.9 5.0 17.0 2.0 181 27.6 0.097 5KP18A 20.0 22.1 5.0 18.0 2.0 171 29.2 0.098 5KP20A 22.2 24.5 5.0 20.0 2.0 154 32.4 0.099 5KP22A 24.4 26.9 5.0 22.0 2.0 141 35.5 0.100 5KP24A 26.7 29.5 5.0 24.0 2.0 129 38.9 0.101 5KP26A 28.9 31.9 5.0 26.0 2.0 119 42.1 0.101 5KP26A 28.9 31.9 5.0 26.0 2.0 119 42.1 0.101 5KP28A 31.1 34.4 5.0 28.0 2.0 110 45.4 0.102 5KP30A 33.3 36.8 5.0 30.0 2.0 103 48.4 0.103 5KP33A 36.7 40.6 5.0 33.0 2.0 93.8 53.3 0.104 5KP36A 40.0 44.2 5.0 36.0 2.0 86.1 58.1 0.104 5KP40A 44.4 49.1 5.0 40.0 2.0 77.5 64.5 0.105 5KP43A 47.8 52.8 5.0 43.0 2.0 72.0 69.4 0.105 5KP45A 50.0 55.3 5.0 45.0 2.0 68.8 72.7 0.106 5KP48A 53.3 58.9 5.0 48.0 2.0 64.6 77.4 0.106 5KP51A 56.7 62.7 5.0 51.0 2.0 60.7 82.4 0.107 5KP54A 60.0 66.3 5.0 54.0 2.0 57.4 87.1 0.107 5KP58A 64.4 71.2 5.0 58.0 2.0 53.4 94 0.107 5KP60A 66.7 73.7 5.0 60.0 2.0 51.7 97.0 0.108 5KP64A 71.1 78.6 5.0 64.0 2.0 48.5 103 0.108 5KP70A 77.8 86.0 5.0 70.0 2.0 44.2 113 0.108 5KP75A 83.3 92.1 5.0 75.0 2.0 41.3 121 0.108 5KP78A 86.7 95.8 5.0 78.0 2.0 39.7 126 0.108 5KP85A 94.4 104 5.0 85.0 2.0 36.5 137 0.110 5KP90A 100 111 5.0 90.0 2.0 34.2 146 0.110 5KP100A 111 123 5.0 100 2.0 30.9 162 0.110 5KP110A 122 135 5.0 110 2.0 28.2 177 0.112 5KP120A 133 147 5.0 120 2.0 25.9 193 0.112 5KP130A 144 159 5.0 130 2.0 23.9 209 0.112 5KP150A 167 185 5.0 150 2.0 20.6 243 0.112 5KP160A 178 197 5.0 160 2.0 19.3 259 0.112 5KP170A 189 209 5.0 170 2.0 18.2 275 0.112 5KP188A 209 231 5.0 188 2.0 15.2 328 0.112 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 Revision: 24-Jun-14 Document Number: 88308 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5KP8.5A thru 5KP188A www.vishay.com Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 5KP8.5A-E3/54 2.776 54 800 13" diameter paper tape and reel 5KP8.5AHE3/54 (1) 2.776 54 800 13" diameter paper tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 Non-Repetitive pulse waveform shown in Fig. 3 TA = 25 C 10 1.0 TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 s Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 s Waveform as defined by R.E.A. td 0 0.1 0.1 s 1.0 s 10 s 100 s 1 ms 10 ms 0 1.0 2.0 3.0 td - Pulse Width t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 4.0 100 000 100 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 75 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p Measured at Zero Bias 10 000 50 25 Measured at Stand-Off Voltage VWM 1000 100 0 0 25 50 75 100 125 150 175 200 1 10 100 TJ - Initial Temperature (C) VWM - Reverse Stand-Off Voltage (V) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 4 - Typical Junction Capacitance 200 Revision: 24-Jun-14 Document Number: 88308 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5KP8.5A thru 5KP188A www.vishay.com Vishay General Semiconductor 500 IFSM - Peak Forward Surge Current (A) PD - Power Dissipation (W) 8 60 Hz Resistive or Inductive Load 6 4 L = 0.375" (9.5 mm) Lead Lengths 2 0 8.3 ms Single Half Sine-Wave 450 400 350 300 250 200 0 25 50 75 100 125 150 175 200 1 10 100 TL - Lead Temperature (C) Number of Cycles at 60 Hz Fig. 5 - Power Derating Curve Fig. 6 - Maximum Non-Repetitive Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) P600 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. APPLICATION NOTES The 5KP series of high power transient voltage suppressors were designed to be used on the output of switching power supplies. These devices may be used to replace crowbar circuits. Both the 5 % and 10 % voltage tolerances are referenced to the power supply output voltage level. They are able to withstand high levels of peak current while allowing a circuit breaker to trip or a fuse blow before shorting. This will enable the user to reset the breaker or replace the fuse and continue operation. For this type operation, it is recommended that a sufficient mounting surface be used for dissipating the heat generated by the Transient Voltage Suppressor during the transient or over-voltage condition. Revision: 24-Jun-14 Document Number: 88308 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 5KP10/54 5KP100/54 5KP100A/4 5KP100A/54 5KP100A-E3/4 5KP100A-E3/51 5KP100A-E3/54 5KP100A-E3/73 5KP100AHE3/54 5KP100AHE3/73 5KP100-E3/4 5KP100-E3/51 5KP100-E3/54 5KP100-E3/73 5KP100HE3/54 5KP100HE3/73 5KP10A/4 5KP10A/54 5KP10A-E3/4 5KP10A-E3/51 5KP10A-E3/54 5KP10A-E3/73 5KP10AHE3/54 5KP10AHE3/73 5KP10-E3/51 5KP10-E3/54 5KP10-E3/73 5KP10HE3/54 5KP10HE3/73 5KP110/4 5KP110/54 5KP110A/4 5KP110A/54 5KP110A-E3/4 5KP110A-E3/51 5KP110A-E3/54 5KP110A-E3/73 5KP110AHE3/54 5KP110AHE3/73 5KP110-E3/4 5KP110-E3/51 5KP110-E3/54 5KP110-E3/73 5KP110HE3/54 5KP110HE3/73 5KP11A/4 5KP11A/54 5KP11A-E3/4 5KP11A-E3/51 5KP11A-E3/54 5KP11A-E3/73 5KP11AHE3/54 5KP11AHE3/73 5KP120A/4 5KP120A/54 5KP120A/73 5KP120A-E3/51 5KP120A-E3/54 5KP120AE3/73 5KP120AHE3/54 5KP120AHE3/73 5KP12A/4 5KP12A/54 5KP12A-E3/4 5KP12A-E3/51 5KP12A-E3/54 5KP12A-E3/73 5KP12AHE3/54 5KP12AHE3/73 5KP13/54 5KP130/51 5KP130/54 5KP130/73 5KP130A/51 5KP130A/54 5KP130A/73 5KP130A-E3/54 5KP130A-E3/73 5KP130AHE3/54 5KP130AHE3/73 5KP13A/4 5KP13A/54 5KP13A-E3/23 5KP13A-E3/4 5KP13A-E3/51 5KP13A-E3/54 5KP13A-E3/73 5KP13AHE3/54 5KP13AHE3/73 5KP13-E3/51 5KP13-E3/54 5KP13-E3/73 5KP13HE3/54 5KP13HE3/73 5KP14A/4 5KP14A/54 5KP14A-E3/4 5KP14A-E3/51 5KP14A-E3/54 5KP14A-E3/73