SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL31X226KPHNNNE Product : Multi-layer Ceramic Capacitor Descriptiont : CAP, 22, 10V, 10%, X6S, 1206 A. Samsung Part Number Series CL 31 X 226 K P H N N N E Samsung Multi-layer Ceramic Capacitor Size 1206 (inch code) Dielectric X6S Capacitance Capacitance L: 3.2 0.2 Rated Voltage 10 V Thickness 1.6 0.2 mm 1.6 0.2 W: Inner electrode Ni Termination Cu Plating Sn 100% 22 10 % tolerance mm mm (Pb Free) Product Normal Special Reserved for future use Packaging Embossed Type, 7" reel B. Samsung Reliability Test and Judgement condition Performance 0.50.1Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 250% of the rated voltage Voltage mechanical breakdown Temperature X6S Characteristics Adhesive Strength (From -55 to 105, Capacitance change should be within 22%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 12020% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 10% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : 2hours 3 direction (x, y, z) With rated voltage Resistance Tan : 0.125 max IR : 402, 90~95%RH, 500+12/-0hrs 12.5* or Over High Temperature Capacitance change : Resistance Tan : 0.125 max IR : within 12.5% within 12.5% With 100% of the rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 15% 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.