Advanced Technical Information ITRMS = 200A ITAVM = 130A VRRM = 800-1800 V Thyristor Modules ECO-PAC 2 ACE-1 VRSM VRRM VDSM V VDRM V Typ 900 1300 1500 1700 1900 800 1200 1400 1600 1800 VCO VCO VCO VCO VCO Symbol E-3 132 132 132 132 132 - 08io7 12io7 14io7 16io7 18io7 Conditions O VC Maximum Ratings 200 A 130 A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 3600 3850 A A TVJ = 125C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 3200 3420 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 64800 62300 A2s A2s TVJ = 125C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 51200 49100 A2s A2s TVJ = 125C; repetitive, IT = 250 A f = 50 Hz; tP = 200 s; VD = 2/3VDRM; 150 A/s IG = 0.5 A diG/dt = 0.5 A/s; 500 A/s ITAVM TC = 85C; TVJ = 130C; 180 sine ITSM TVJ = 45C; VR = 0 V; (di/dt)cr K-12 SVX-18 ITRMS I2dt TVJ = 45C; VR = 0 V; non repetitive, IT = ITAVM (dv/dt)cr TVJ = 125C; VDR = 2/3VDRM RGK = , method 1 (linear voltage rise) 1000 V/s PGM TVJ = 125C; IT = ITAVM; 10 5 W W PGAVM 0.5 W VRGM 10 V -40 ... + 130 150 -40 ... + 125 C C C 3000 3600 V~ V~ 1.5 - 2.0 14 - 18 Nm lb.in. 24 g TVJ TVJM Tstg VCO132 tP = 30 ms tP = 300 ms for 10 sec VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M4) Weight typ. 132 Features * Isolation voltage 3600 V~ * Planar glass passivated chips * Low forward voltage drop * Leads suitable for PC board soldering Applications * DC motor control * Light and temperature control * Softstart AC motor controller * Solid state switches Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling * High power density * Small and light weight IXYS reserves the right to change limits, test conditions and dimensions. (c) 2003 IXYS All rights reserved 312 Data according to IEC 60747 refer to a single thyristor unless otherwise stated 1-2 Advanced Technical Information VCO132 Component Symbol Conditions Characteristic Values min. typ. max. ID, IR TVJ = 125C; VR = VRRM; VD = VDRM 10 mA VT IT = 200 A; TVJ = 25C 1.3 V VTO rT For power-loss calculations only VGT VD = 6 V; TVJ = 25C TVJ = -40C 1.5 1.6 V V IGT VD = 6 V; TVJ = 25C TVJ = -40C 300 400 mA mA VGD IGD TVJ = 125C; TVJ = 125C; VD = 2/3VDRM VD = 2/3VDRM 0.2 10 V mA IL TVJ = 25C; tP = 10 s IG = 0.5 A; diG/dt = 0.5 A/s 450 mA IH TVJ = 25C; VD = 6 V; RGK = 200 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.5 A; diG/dt = 0.5 A/s 2 s RthJC RthJH per Thyristor; DC per Thyristor; DC; typ. dS dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 0.8 V 1.65 m 0,35 0.25 K/W K/W 11.2 mm 5.0 mm 50 m/s2 312 Dimensions in mm (1 mm = 0.0394") (c) 2003 IXYS All rights reserved 2-2