HR34B-12WLPE-4S-X - HIROSE Electric U.S.A., Inc.

2011.53

Push-on Bayonet Lock Miniature Waterproof Connector

HR34B Series

■Features

1. Water and dust protection

• IP67 or more (IP68) water and dust protection rating when

fully mated.

• Resistant to industrial grade oils.

• 4-position receptacles are sealed against water penetration

when mounted on the panel - no protective cap is required.

2. Easy and precise mating

• Mating: Just inserting plug unit completes mating

Unmating: Rotating sleeve counterclockwise unlocks

connectors (fig.1)

• Marking helps align plug with receptacle when mating.

• 3 guide keys make blind mating possible.

(Receptacle structure prevents plug from damaging

receptacle terminals)

3. Multi-directional cable exit

Right angle plugs allow the cable to exit in 8 directions, in

45˚ increments.(fig.2)

4. Safty standards

The 4-position connectors meet requirements of T ¨

standard.

5. Wide variation

Item

Number of positions

Connector type

Terminations(plug)

Terminations(receptacle)

Conduit material

Applicable cable size(Reference)

4,10

straight plug,right angle plug,receptacle

solder,crimp

wire solder

plastic,metal

(Ø5.3~6.5), (Ø6.5~7.3), (Ø8.0~9.0)

Push-on Bayonet Lock

fig.1

Mating : Just inserting plug unit will complete mating

Un-mating : Rotating sleeve to unlock mating

Cable exit directions

fig.2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector

■Specifications

1 A DC

500 V DC

10 pos. : 900 V AC / 1 minute

4 pos. : 2,000 V AC / 1 minute

20 mø max.

1,000 Mø min.

No flashover or insulation breakdown

Contact resistance

Insulation resistance

3.Withstanding voltage

SpecificationItem Conditions

Insulation resistance: 50 Mø min. (at high humidity)

Insulation resistance: 500 Mø min. (when dry)

No water penetration when submerged for 0.5 hours at the depth of 1 meters.

500 cycles

No electrical discontinuity of 10 µs or longer

Contact resistance: 30 mø max.

Insulation resistance: 500 Mø min.

Frequency: 10 to 500 Hz/cycle, total amplitude of 0.75 mm,

98m/s2each, 3 hours in 3 axis.

Temperature :-55°C /+15° to +35°C /+85°C /+15° to +35°C

Time :-30 min. /10 to 15 min. /30 min. /10 to 15 min.

5 cycles

336 hours at 71°C, and humidity of 95%

Acceleration of 490 m/s2, 11 ms duration,

3 axis, each for 3 hours

No electrical discontinuity of 10 µs or longer4.Vibration

5.Shock

6.Durability

(Mating / un-mating)

7.Temperature cycle

8.Humidity

Water protection

Current rating

Voltage rating

Ratings 10 pos.: 200 V AC, 250 V DC

4 pos. : 200 V AC, 200 V DC (contamination level 3)

400 V AC, 400 V DC (contamination level 2)

10 pos.: 3 A

4 pos. :5 A

Operating temperature range

Storage temperature range

-25°C to 125°C

-25°C to 85°C

■Materials

Remarks

---------------

UL94V-0

Part Material Finish

Outer shell

Insulator

O-ring

Male contacts

Ground contact

10 pos.

4 pos.

Zinc alloy

PPS

Copper alloy

Brass

Fluororubber

Gold plated

Silver plated

Black chromate finish (Cr +3)

Color: Black

---------------

●Receptacles

Remarks

---------------

UL94V-0

Part Material Finish

Outer shell

O-ring

Gasket

Insulator

Female contacts 10 pos.

4 pos.

Zinc alloy, aluminum alloy, and

polyamide resin (black)

Fluororubber,

Nitrile hydride rubber

PPS

Black chrome plating, black

chromate finish (Cr +3)

Color: Black

---------------

Phosphor bronze

Copper alloy

Gold plated

Silver plated

●Plugs

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector

Number of contact : Number of contacts.

(Excluding ground contacts)

Contact type

S : Female wire solder

SC : Female crimp

Keying

Blank : Standard

X : X key position

Other specifications : 2 numerical digits wil be added when there

is a specifications change other than

shown in positions qto u

■Ordering information

Please determine the specific product. If listed needed, please select and order the product No.

HR34B - 12 WP A - 10 S - X (****)

1 52 3 4 6 7 8

●Plugs

Series name : HR34B Series

Shell size : Diameter(mm) of the mating interface of the plug

Shell style WP : Straight plug

WLP : Right-angle plug

Conduit material and Applicable cable size

A:Conduit material metal, Applicable cable (Reference):(Ø5.3~6.5)

B:Conduit material metal, Applicable cable (Reference):(Ø6.5~7.3)

D:Conduit material plastic, Applicable cable (Reference):(Ø5.7~6.5)

E:Conduit material plastic, Applicable cable (Reference):(Ø6.5~7.3)

K:Conduit material metal, Applicable cable (Reference):(Ø8.0~9.0)

1 5

Number of contact : Number of contacts.

(Excluding ground contacts)

Contact type

P : Male,wire solder

Keying

Blank : Standard

X : X key position

Other specifications : 2 numerical digits wil be added when there

is a specification change other than shown

in positions qto u

HR34B - 12 WR A - 10 P - X (****)

1 52 3 4 6 7 8

●Receptacles

Series name : HR34B Series

Shell size : Diameter(mm) of the mating interface of the plug

Shell style WR : Receptacl

Shell type

A : Square flange for 10 positions

B : Square flange for 4 positions

1 5

Conductor size : AWG#20 - #25

Plating

1:Gold plated

HR34B - SC1 - 2 1 1

1 2 43 5

●Crimp contacts

Series name : HR34B Series

Contact style :

SC1:Female contact

Contact type

1 : 100pcs.per bag

2 : 10,000pcs per reel

1 4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

BIllustrations of mated connectors.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector

Ø19

■Straight plugs

Part Number

HR34B-12WPD-10S

HR34B-12WPE-10S

HR34B-12WPD-4S

HR34B-12WPD-4S-X

HR34B-12WPE-4S

HR34B-12WPE-4S-X

HRS No. A

134-0026-0-00

134-0027-2-00

134-0020-3-00

134-0023-1-00

134-0025-7-00

134-0031-0-00

Ø7.4

Ø8.5

Ø7.4

Ø8.5

Applicable cable diameter range(Reference)

Solder cup inner diameter

All dimensions: mm

Ø1

Ø1.7

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part Number

HR34B-12WPA-10S(71)

HR34B-12WPB-10S(71)

HR34B-12WPK-10S

HRS No. A

134-0004-7-71

134-0007-5-71

134-0052-0-00

Ø7.4

Ø8.5

Ø9.5

Applicable cable diameter range(Reference)

Solder cup inner diameter

All dimensions: mm

Ø1

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

Part Number

HR34B-12WPD-10SC

HR34B-12WPE-10SC

HRS No. A

134-0037-6-00

134-0038-9-00

Ø7.4

Ø8.5

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part Number

HR34B-12WPA-10SC

HR34B-12WPB-10SC

HR34B-12WPK-10SC

Not all cables of applicable dia. range can be easily assembled.

Please kindly check with factory before use.

HRS No. A

134-0017-9-00

134-0028-5-00

134-0053-2-00

Ø7.4

Ø8.5

Ø9.5

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

●Standard type (Conduit material :Plastic)

◆Wire solder

◆Crimp (separate contacts required)

●Crimp (separate contacts required)

●Robust type(Conduit material :Metal)

Straight plug Mating combinations

10 pos.plug + receptacle wire solder

4 pos.plug + receptacle wire solder

50.1

49.6

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector

■Right angle plugs

●Standard type (Conduit material : Plastic)

33.5

Ø19

Part Number

HR34B-12WLPD-10S

HR34B-12WLPE-10S

HR34B-12WLPD-4S

HR34B-12WLPD-4S-X

HR34B-12WLPE-4S

HR34B-12WLPE-4S-X

HRS No. A B

134-0039-1-00

134-0040-0-00

134-0030-7-00

134-0034-8-00

134-0035-0-00

134-0036-3-00

Applicable cable diameter range(Reference)

Solder cup inner diameter

All dimensions: mm

Ø1

Ø1.7

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part Number

HR34B-12WLPA-10S(71)

HR34B-12WLPB-10S(71)

HR34B-12WLPK-10S

HRS No. A B

134-0005-0-71

134-0008-8-71

134-0054-5-00

Ø7.4

Ø8.5

Ø9.5

30.5

31.5

Applicable cable diameter range(Reference)

Solder cup inner diameterAll dimensions: mm

Ø1

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

Part Number

HR34B-12WLPD-10SC

HR34B-12WLPE-10SC

HRS No. A B

134-0041-3-00

134-0042-6-00

Ø7.4

Ø8.5 30.85

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part Number

HR34B-12WLPA-10SC

HR34B-12WLPB-10SC

HR34B-12WLPK-10SC

Not all cables of applicable dia. range can be easily assembled.

Please kindly check with factory before use.

HRS No. A B

134-0018-1-00

134-0029-8-00

134-0055-8-00

Ø7.4

Ø8.5

Ø9.5

30.5

31.5

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

◆Wire solder

◆Crimp (separate contacts required)

●Crimp (separate contacts required)

●Robust type (Conduit material :Metal)

Ø7.4

Ø8.5

Ø7.4

Ø8.5

30.85

BIllustrations of mated connectors.

（33.5）

10 pos. plug shell A,B type.

10 pos. plug shell D,E type.

10 pos. plug shell K type.

4 pos.plug + receptacle wire solder

Plug + receptacle wire solder

31.0

31.3

32.0

31.3

Right-angle plug Mating Combinations

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector

■Receptacles

◆Wire solder

810

4-Ø3.2

4-(R2.8)

Part Number

HR34B-12WRA-10P

HR34B-12WRB-4P

HR34B-12WRB-4P-X

O ring for water proof is not attached. Please find appropriate one from the market.

HRS No. A B

134-0016-6-00

134-0021-6-00

134-0024-4-00

Solder cup inner diameter

All dimensions: mm

Ø1

Ø1.4

17.26

18.26

23.4

25.4

■Crimp contacts

◆Female

1.2

Part Number Packaging

HR34B-SC1-111

HR34B-SC1-211

100 pcs. per bag

10,000 pcs. per reel

Note: Use wire with a jacket diameter of 1.7mm max.

CL No.

134-0051-7-00

134-0050-4-00

Applicable conductor

AWG #20 - 25

(Stranded wire)

BRecommended panel cutouts

●Receptacle - wire solder

ØE

ØD

4-B

Part Number

HR34B-12WRA-10P

HR34B-12WRB-4P

HR34B-12WRB-4P-X

Recommended O ring dia.

Cross-section

1.5

diameter

11.5

15.5

HR34B-12WRA-10P HR34B-12WRB-4P

HR34B-12WRB-4P-X

17.26±0.05

1 0/-0.1

12.5 +0.1/0

17 +0.1/0

18.26±0.05

1.1 0/-0.1

16.3 +0.1/0

20.8 +0.1/0

M3∞0.5

All dimensions: mm

BReceptacle Contact Arrangement

note.1 View direction:Mating surface of pin insert.

note.2 mark is ground terminal.

108

312

4 pos.wire solder 10 pos.wire solder

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector

BConnector Mating Combinations

Straight, Wire Solder (Standard key position)

HR34B-12WPD-4S

HR34B-12WPE-4S

Wire solder (Standard key position)

HR34B-12WRB-4P

Wire solder (X key position)

HR34B-12WRB-4P-X

Right angle, Wire Solder (Standard key position)

HR34B-12WLPD-4S

HR34B-12WLPE-4S

Straight, Wire Solder (X key position)

HR34B-12WPD-4S-X

HR34B-12WPE-4S-X

Right angle, Wire Solder (X key position)

HR34B-12WLPD-4S-X

HR34B-12WLPE-4S-X

4 pos. Plugs 4 pos. Receptacles

Standard key position

X key position

Standard

polarizing key

Straight, Wire Solder or Crimp (Standard key position)

HR34B-12WPA-10S,10SC HR34B-12WPB-10S,10SC

HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC

HR34B-12WPK-10S,10SC

Right angle, Wire Solder or Crimp (Standard key position)

HR34B-12WLPA-10S,10SC HR34B-12WLPB-10S,10SC

HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC

HR34B-12WLPK-10S,10SC

Wire Solder

HR34B-12WRA-10P

10 pos. Plugs 10 pos. Receptacles



The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector

■Applicable tools

Description Part Number CL No. Applicable contact Applicable cable

Manual contact crimping tool

Press

Applicator

Contact extraction tool

HT304/HR34B-1

CM-105

AP105-HR34B-1

RP6-SC-TP

150-0107-9

901-0005-4

901-2051-2

150-0039-0

HR34B-SC1-111

HR34B-SC1-211

HR34B-SC1-111

HR34B-SC1-211

AWG20,AWG23,AWG25

AWG20 to AWG25

---------------

●

Manual contact crimping tool

●Press CM-105 (Applicator

ordered separate) ●Contact extraction tool

BHandling

BPrecautions

1. Mating 2. Un-mating

Holding the plug by the outer shell (A) align the arrow on the plug

with the alignment mark on the receptacle and push straight in.

Rotate the locking collar counter-clockwise to a full stop and un-

mate the plug from the receptacle.

Plug

Mating position alignment marks

Receptacle

Rotate counter-clockwise

1. When disconnecting or inserting the connector, be sure to do so after turning off the power.

2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below (i.e., the

mating mark of the receptacle).

3. Note that the display method of the mating mark will differ depending on the receptacle.

4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.

5. Please consult Hirose Electric Sales for harness assembly procedure.

Center line of the connector

1 mm max.

Alignment mark

When completely mated and locked the alignment

arrow on the plug must line-up with the center line of

the connector (alignment mark on the receptacle).

If the alignment arrow and the center line of the

connectors are not aligned (1 mm max.) re-insert

the plug until they are aligned.

The contents of this catalog are current as of date of 05/2011. Contents are subject to change without notice for the purpose of improvements.

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230

http://www.hirose.com

http://www.hirose-connectors.com

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.