SMP / SMPM Applications Applications SMP/SMPM Application Notes SMP & SMPM connectors are excellent choices for PC board to board interconnects, as well as module to module interconnects. The unique interface constructions allow for minimal electrical degradation when maximum misalignment occurs. Their overall profile allows for system designers to fit these interconnects in to tighter packaging than the majority of micro-minature RF connectors. Both the SMP and SMPM come in a variety of configurations, each with specific features for whatever engineering challenge a designer is facing. Delta took this into consideration when developing this catalog and provides any combination of configuration to meet our customers' needs. Whether you are interfacing in an exposed environment, increasing package density, reducing weight or improving performance at higher frequencies, Delta's complete line of SMP / SMPM connectors provides a solution. Current applications utilizing the SMP / SMPM connectors include Military / Aerospace, Medical, Networking and Telecommunications. Custom Gang Mounted Female Cable Assemblies - Harness groups of cable assemblies - Keying Features built - in for proper port alignment - Available for termination to numerous flexible & conformable cable assemblies - Terminates to variety of other RF connector interfaces Edge Mount Male Connectors - Provides RF interface at board edge - Ideal for low profile board stacking Hermetically Sealed Bulkhead Mounted - Engineered for exposed environments - Available in numerous mounting configurations - Available in numerous termination styles PC Mounted - Available in a variety of mounting configurations Custom Gang Mounted PCB Males -Simplifies PC assembly -Sets port to port spacing - No soldering - Mechanically secured to PC Board - Customized for specific applications 4 Hole Flange Mounted Male Receptacles - Available in standard flange sizes - Easily substitute existing RF interfaces with SMP /SMPM series - No modification needed to existing housings Right Angle Female Cable Connectors - Simplifies transition to coax cable - Low profile bend for limited space requirements - Bulkhead mounting feature 2 Hole Flange Mounted Male Receptacles - Available in standard flange sizes - Easily substitute existing RF interfaces with SMP /SMPM series -Reduces port to port spacing requirements "Spring Loaded" Female to Female Bullet Adapters - Increases axial float while minimizing electrical degradation 2 Delta Electronics Mfg. Corp. deltarf.com Straight Female Cable Connectors - Simplifies transition to coax cable - Available for termination to numerous flexible, semi-rigid, & conformable cable 978-927-1060 sales@deltarf.com SMP Specifications General Description SMP Connectors DC - 40 GHz Subminiature Modular Plug-in style microwave connectors allow devices to be connected in a modular fashion, without the need for cables or threaded coupling mechanisms. Central to the SMP design is the floating female to female "Bullet" adapter. This adapter, available in the interface. The adapter is mated between two males connectors allowing simultaneous multiple microwave interconnects with a minimum center to center spacing of .170 of an inch. This series is ideal for high density module to module or board to board interconnects. Delta's SMP series is designed in accordance with DSCC 94007, 94008 and Mil-STD-348A. The SMP interface is available in (3) levels of retention: Full Detent (FD) for maximum retention Limited Detent (LD) for medium retention Smooth Bore (SB) for minimum retention Also available, for applications requiring maximum self alignment during mating: Catchers Mitt (CM) entry & the absolute minimum retention increased axial & radial float while maintaining the full mechanical properties of the standard bullet . (see page 12 for details). Table of Contents SMPM SMP General Description.................................... 1 Interface Dimensions.................................. 13 Interface Dimensions.................................. 2 General Description.................................... 13 Electrical & Mechanical Specifications......... 3 Electrical & Mechanical Specifications......... 14 Test Data.................................................... 3 Test Data.................................................... 14 Cable Mount Connectors........................... 4-6 Cable Connectors....................................... 15 Shrouds...................................................... 7-8 Shroud(s).................................................... 16 Accessory Pins............................................ 8 Thread-In Male........................................... 16 Hermetically Sealed Connectors.................. 8 Hermetically Sealed.................................... 16-17 Panel Mounts.............................................. 9 Panel Mounts.............................................. 17-18 PC Board Mounts ...................................... 10 Surface / Float Mount Female .................... 19 Edge Mounts.............................................. 11 Surface Mount Males.................................. 20 Female to Female "Bullet" Adapters............ 11 Female to Female Bullet Adapters............... 21 Spring Loaded F to F "Bullet" Adapters...... 12 Assembly Procedures................................ 21-23 Index By Delta P/N................................... 23 Notes......................................................... 24 3 SMP Specifications SMP Interfaces SMP (Limited Detent) Male SMP (Full Detent) Male PER MIL-STD-348A - Figure 326.3 PER MIL-STD-348A - Figure 326.2 SMP (Smooth Bore) Male PER MIL-STD-348A - Figure 326.4 4 SMP (Catchers Mitt) Male PER MIL-STD-348A - Figure 326.5 SMP Female (Cabled) SMP Female (Uncabled) PER MIL-STD-348A - Figure 326.1a PER MIL-STD-348A - Figure 326.1 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP Specifications Electrical and Mechanical Specifications* Electrical Specifications: Finishes: Nominal Impedance: 50 ohms Frequency Range: DC-40 GHz Typical VSWR: 1.20 Max thru 26.5 GHz ; 1.5 Max thru 40 GHz Insulation Resistance: 5,000 megohms DWV (@sea level) : 500 Vrms Power Handling: (@sea level & ambient temperature) : 120W - 5.5f (frequency) RF Leakage: -80db to 3 GHz, -65db to 26.5 GHz Bodies: Gold Plate per MIL-G-45204, over Nickel Plate per SAE AMS-QQ-N-290 or Passivated per AMS-QQ-P-35 Contacts: Gold Plate per MIL-G-45204, over Nickel Plate per SAE AMS-QQ-N-290 Environmental Specifications: Mechanical Specifications: Durability: 100 min (FD) ; 500 min (LD) ; 1000 (SB & CM) Force to Engage: 9.0 lbs typ (FD) ; 7.0 lbs typ (LD) ; 5.0 lbs typ (SB & CM) Force to Disengage: 7.0 lbs typ (FD) ; 5.0 lbs typ (LD) ; 0.5 lbs typ (SB & CM) Contact Retention: 2 lbs min. Minimum Center Line to Center Line Spacing: .156" Radial Misalignment: +/- .010" Axial Misalignment: .010" Max Temperature Range: -65 C to +165 C Shock: Meets MIL-STD-202 Method 213, Condition I Vibration: Meets MIL-STD-202 Method 204, Condition D Altitude: Meets MIL-STD-202, Method 105 Condition C Thermal Shock: Meets MIL-STD-202, Method 107 Condition B Delta Electronics Manufacturing's SMP interfaces are in accordance with DSCC 94007, 94008 and MIL-STD-348A. Materials: Bodies/Shrouds: Beryllium Copper Per ASTM B196 and/or ASTM B197 or Stainless Steel type 303, Condition A Outer Contacts: Beryllium Copper Per ASTM B196 or ASTM B197 Center Contacts: Beryllium Copper Per ASTM B196 or ASTM B197 Insulators: PTFE Fluorocarbon per ASTM D1710 *These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors are available upon request. SMP Test Data 1.7 SMK Female to SMP (FD) Male Adapter Delta P/N 8628000G001 - 002 1.6 Test Setup VSWR 1.5 1.4 1.3 1.2 1.1 As Tested 1.0 0 5.4 13.5 21.6 27 Frequency (Ghz) SMP "Bullet" adapter tested using an SMK (2.92) female to a SMP male and a 2.92 calibration kit. The adapters are gated out and the VSWR plot shown is representative of the "Bullet" adapter only. These results are typical and valid only for connectors set up for testing in the configuration shown. Other 5 SMP Cable Connectors Direct Solder Females Assembly Procedure For trim code please contact the factory. 8608111G001-001 Direct Solder Female for .047 Dia S/R Cable Assembly Procedure Trim Code: N/01 8608094G001-000 Direct Solder Female for .085 Dia S/R Cable Assembly Procedure Trim Code: N/01 8608038G001-000 Direct Solder Female for RG 178 Cable Assembly Procedure Trim Code: N/01 8608037G001-000 Direct Solder Female for RG 316 Cable See page 22 for assembly instructions. 6 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP Cable Connectors Cable Mount Male & Female - Direct Solder Assembly Procedure Trim Code: J/05 8676111G001-000 R/A Female for .047 Dia S/R Cable Assembly Procedure Trim Code: J/05 8676037G001-000 R/A Female RG 316 Cable Assembly Procedure Trim Code: N/01 8601094G001-000 Direct Solder Panel Mount FD Male for .085 Dia S/R Cable See page 21 & 22 for assembly instructions. 7 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP Cable Connectors Right Angle Cable Mount Males Dash Number Interface Type -003 CM -002 SB -001 LD -000 FD Dash Number Interface Type -003 CM -002 SB -001 LD -000 FD Dash Number Interface Type -003 CM -002 SB -001 LD -000 FD 8672111G001-XXX R/A Male for .047 Dia S/R Cable Assembly Procedure Trim Code: J/05 8672094G001-XXX R/A Male for .085 S/R Cable Assembly Procedure Trim Code: J/05 8672037G001-XXX R/A Male for RG 316 Cable Assembly Procedure Trim Code: J/05 See page 21 for assembly instructions. 8 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP Shrouds Shrouds Dash Number 8600000G003-XXX Solder-On Shroud Dimensions Interface Type A B -012 .040 .150 SB -011 .040 .150 LD -010 .040 .150 FD -009 .030 .140 SB -008 .030 .140 LD -007 .030 .140 FD -006 .020 .130 SB -005 .020 .130 LD -004 .020 .130 FD -003 .010 .120 SB -002 .010 .120 LD -001 .010 .120 FD 8624000K910 - XXX Thread-In Shroud - Passivated Steel Dimensions Delta P/N Thread SMP Interface Type .190 12-56-UNS-2A Catcher's Mitt .140 .190 12-56-UNS-2A Catcher's Mitt .130 .190 12-56-UNS-2A Catcher's Mitt A B C .040 .150 8624000K910-015 .030 8624000K910-014 .020 8624000K910-016 8624000K910-013 .010 .120 .190 12-56-UNS-2A Catcher's Mitt 8624000K910-012 .040 .150 .154 10-48-UNS-2A Smooth Bore 8624000K910-011 .040 .150 .154 10-48-UNS-2A Limited Detent 8624000K910-010 .040 .150 .154 10-48-UNS-2A Full Detent 8624000K910-009 .030 .140 .154 10-48-UNS-2A Smooth Bore 8624000K910-008 .030 .140 .154 10-48-UNS-2A Limited Detent 8624000K910-007 .030 .140 .154 10-48-UNS-2A Full Detent 8624000K910-006 .020 .130 .154 10-48-UNS-2A Smooth Bore 8624000K910-005 .020 .130 .154 10-48-UNS-2A Limited Detent 8624000K910-004 .020 .130 .154 10-48-UNS-2A Full Detent 8624000K910-003 .010 .120 .154 10-48-UNS-2A Smooth Bore 8624000K910-002 .010 .120 .154 10-48-UNS-2A Limited Detent 8624000K910-001 .010 .120 .154 10-48-UNS-2A Full Detent Please contact the factory for mounting instructions. - See page 8 for accessory pins 9 The Delta Di erence - Delivering Interconnect Solutions That Make A Di erence SMP Connectors Shrouds - Flange Mount Dash Number Dimensions Interface Type A B -012 .040 .150 SB -011 .040 .150 LD -010 .040 .150 FD -009 .030 .140 SB -008 .030 .140 LD -007 .030 .140 FD -006 .020 .130 SB -005 .020 .130 LD -004 .020 .130 FD -003 .010 .120 SB -002 .010 .120 LD -001 .010 .120 FD 8659000K910 - XXX Shroud, 2 Hole Panel Mount - Passivated Steel Accessory Pins Dash Number Dimensions A PBC Thickness -03 .132 .001 .062 -02 .117 .001 .047 -01 .102 .001 .032 Please contact the factory for additional pin variations. 81-10384 -XX - AU SMP Accessory Pin Solder-In Hermetically Sealed Male Dash Number Dimensions -039 .090 SB -038 .070 SB -037 .050 SB -036 .030 SB -035 .090 LD -034 .070 LD A Interface Type -033 .050 LD -032 .030 LD -031 .090 FD -030 .070 FD -029 .050 FD -028 .030 FD 8624000G918 - XXX Solder-In Hermetically Sealed Male, Extended Post Contact Please contact the factory for mounting instructions. 10 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP Panel Mounts Panel Mounts 8659000K051 - XXX Panel Mount, 4 Hole, Male Passivated Steel Delta P/N Dimensions SMP Interface Type A B C D 8659000K051-009 .040 .070 .056 .018 8659000K051-008 .040 .070 .056 .018 Full Detent 8659000K051-007 .040 .070 .056 .018 Limited Detent 8659000K051-006 .150 .250 .097 .030 Smooth Bore 8659000K051-005 .150 .250 .097 .030 Full Detent 8659000K051-004 .150 .250 .097 .030 Limited Detent Smooth Bore 8659000K051-003 .197 .393 .161 .050 Smooth Bore 8659000K051-002 .197 .393 .161 .050 Full Detent 8659000K051-001 .197 .393 .161 .050 Limited Detent 8659000K911 - XXX Panel Mount, 2 Hole, Male Passivated Steel Delta P/N 8659000K911-010 Dimensions A B C D .040 .070 .056 .018 SMP Interface Type Smooth Bore 8659000K911-009 .040 .070 .056 .018 Full Detent 8659000K911-008 .040 .070 .056 .018 Limited Detent 8659000K911-007 .150 .250 .097 .030 Smooth Bore 8659000K911-006 .150 .250 .097 .030 Full Detent 8659000K911-005 .150 .250 .097 .030 Limited Detent Please contact the factory for mounting instructions. 11 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP PCB Males PCB Mount Males Figure 2 8668000G91P - XXX Surface Mount Figure 1 8668000G001 - XXX PCB Feed Through Figure Delta P/N 1 2 Dash Number Dimensions SMP Interface Type A B 8668000G001-025 .235 .140 Catcher's Mitt 8668000G001-024 .218 .140 Smooth Bore 8668000G001-023 .218 .140 Full Detent 8668000G001-022 .218 .140 Limited Detent 8668000G001-021 .235 .100 Catcher's Mitt 8668000G001-020 .218 .100 Smooth Bore 8668000G001-019 .218 .100 Full Detent 8668000G001-018 .218 .100 Limited Detent 8668000G001-017 .235 .079 Catcher's Mitt 8668000G001-016 .218 .079 Smooth Bore 8668000G001-015 .218 .079 Full Detent 8668000G001-014 .218 .079 Limited Detent 8668000G91P-017 .235 Catcher's Mitt 8668000G91P-016 .218 Smooth Bore 8668000G91P-015 .218 Full Detent 8668000G91P-014 .218 Limited Detent Dimensions Interface Type A B C -013 .235 .275 .200 -012 .162 .200 .150 SB -011 .162 .200 .150 FD -010 .162 .200 .150 LD CM 8667000G91P - XXX Surface Mount Male - Right Angle Tab Contact Please contact the factory for mounting instructions. 12 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP Connectors Edge Mount Males Delta P/N SMP Interface Type 8668000G911-003 Smooth Bore 8668000G911-002 Full Detent 8668000G911-001 Limited Detent 8668000G911- XXX Edge Mount PCB Male Female to Female "Bullet" Adapters Delta P/N Dimension 8628000G001-016 .344 A 8628000G001-015 .314 8628000G001-014 .270 8628000G001-013 .254 8628000G001-012 .224 Please contact the factory for additional lengths. 8628000G001 - XXX Female to Female "Bullet" Adapters Please contact the factory for mounting instructions. 13 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP "Bullet" Adapters Spring Loaded - SMP Female to Female "Bullet" Adapter Feature: Benefit: * * * * * * Increased axial & radial float One side has as a low insertion SMP interface High compression load on interfaces Enhanced self alignment during mating Consistently un-mate from the same end Improved VSWR at higher frequencies VSWR Compressed 1.7 1.7 1.6 1.6 VSWR VSWR Uncompressed 1.5 1.4 1.3 1.2 1.4 1.3 1.2 1.1 1.0 1.5 1.1 0 5.4 21.6 13.5 1.0 27 Frequency (Ghz) 0 5.4 13.5 Frequency (Ghz) 21.6 VSWR: 1.5:1 Max Frequency Range: DC - 26.5 GHz Float: Axial .075 / Radial .015 Delta P/N Uncompressed Length Fully Compressed Length 8628000G911-005 1.075 1.000 8628000G911-004 .675 .600 Please contact the factory for additional lengths. 8628000G911 - XXX Spring Loaded Female to Female "Bullet" Adapter 14 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com 27 SMPM Specifications SMPM Interfaces SMPM (Full Detent) Male SMPM (Limited Detent) Male PER MIL-STD-348A - Figure 328.2 SMPM (Smooth Bore) Male SMPM (Catchers Mitt) Male PER MIL-STD-348A - Figure 328.3 SMPM Connectors DC - 65 GHz Similar in functionality to the SMP series, the SMPM frequency range of DC to 65 GHz. Center to center mounting spacing is also reduced to .125 of an inch. This gives the SMPM series a distinct advantage in higher density module to module and board to board microwave applications. SMPM Female PER MIL-STD-348A - Figure 328.1 15 Delta Electronics Mfg. Corp. For higher frequency board to board applications that require the minimum distance between boards, Delta see Delta # 8869000G001-001 on page19 for details. deltarf.com 978-927-1060 sales@deltarf.com SMPM Specifications Electrical and Mechanical Specifications* Electrical Specifications: Finishes: Nominal Impedance: 50 ohms Frequency Range: DC-65 GHz Typical VSWR: 1.20 Max thru 26.5 GHz ; 1.5 Max thru 65 GHz Insulation Resistance: 5,000 megohms DWV (@sea level): 500 Vrms Power Handling (@ sea level & ambient temp): 90W - 5.5f (frequency) RF Leakage: -80db to 3 GHz, -65db from 3 to 65 GHz Bodies: Gold Plate per MIL-G-45204, over Nickel Plate per SAE AMS-QQ-N-290 or Passivated per AMS-QQ-P-35 Mechanical Specifications: Durability: 100 min (FD) ; 250 min (LD) ; 500 (SB & CM) Force to Engage: 5.0 lbs typ (FD) ; 3.5 lbs typ (LD) ; 2 lbs typ (SB & CM) Force to Disengage: 6.0 lbs typ (FD) ; 4.0 lbs typ (LD) ; 1.5 lbs typ (SB & CM) Contact Retention: 2 lbs min. Minimum Center Line to Center Line Spacing: .125" (CM - .145") Radial Misalignment: +/- .010" Axial Misalignment: .010" Max Materials: Bodies/Shrouds: Beryllium Copper Per ASTM B196 and/or ASTM B197 or Stainless Steel type 303, Condition A Outer Contacts: Beryllium Copper Per ASTM B196 or ASTM B197 Center Contacts: Beryllium Copper Per ASTM B196 or ASTM B197 Insulators: PTFE Fluorocarbon per ASTM D1710 Contacts: Gold Plate per MIL-G-45204, over Nickel Plate per SAE AMS-QQ-N-290 Environmental Specifications: Temperature Range: -65 C to +165 C Shock: Meets MIL-STD-202 Method 213, Condition I Vibration: Meets MIL-STD-202 Method 204, Condition D Altitude: Meets MIL-STD-202, Method 105 Condition C Thermal Shock: Meets MIL-STD-202, Method 107 Condition B Delta Electronics Manufacturing's SMPM interfaces conform to MIL-STD-348A as well as industry standards for this series and are completely intermateable with other manufacturers SMPM series connectors. *These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors are available upon request. SMPM Test Data SMK Female to SMPM (FD) Male Adapter Delta P/N 8828000G001 - 011 1.7 1.6 VSWR Test Setup As Tested 1.5 1.4 1.3 SMPM "Bullet" adapter tested using an SMK (2.92) female to SMPM male and a 2.92 calibration kit. The adapters are gated out and the VSWR plot shown is representative of the "Bullet" adapter only. These results are typical and valid only for connectors set up for testing in the configuration 1.2 1.1 1.0 0 4 8 12 16 20 24 28 32 Frequency (Ghz) of the completed component. 16 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com 36 40 SMPM Cable Connectors Direct Solder Females 8808111G003 - 000 Female, Direct Solder "One Step" for .047 Semi Rigid Cable Assembly Procedure Trim Code: P/01 8808094G001 - 003 Female, Direct Solder "One Step" for .085 Semi Rigid Cable Assembly Procedure Trim Code: P/01 8876111G003 - 000 R/A Female, Direct Solder for .047 Semi Rigid Cable 8876094G003 - 000 R/A Female, Direct Solder for .085 Semi Rigid Cable Assembly Procedure Trim Code: J/05 Assembly Procedure Trim Code: J/05 Delta One-Step Cable Attachment for Semi-Rigid Cable Cable Solder contact 17 Delta "One - Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable - simply trim the cable jacket and dielectic flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. See page 21 & 23 for assembly instructions. Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com 15 SMPM Males Solder-On Shroud 8800000G003 - 000 Solder-On Shroud & Pin Assembly, SB Male Thread-In Male Dash Number Interface Type -008 LD -005 SB -004 FD 8824000K911 - XXX Thread-In Male - Passivated Steel Hermetically Sealed 8824000G918 - 002 Hermetically Sealed Knife Edge, FD Male Please contact the factory for mounting instructions. 18 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMPM Connectors Hermetically Sealed Solder-In Male 8824000G918 - XXX Hermetically Sealed Solder-In Male - Extended Pin Dash Number Dimensions Interface Type -027 .090 -026 .090 SB -025 .090 FD -024 .070 LD -023 .070 SB -022 .070 FD -021 .050 LD -020 .050 SB -019 .050 FD -018 .030 LD A LD -017 .030 SB -008 .030 FD Field Replaceable Panel Mounts - Accepts .012 Dia Pin Dash Number Interface Type -003 LD -002 SB -001 FD 8859000K051 - XXX Panel Mount - 4 Hole Male Passivated Steel Dash Number Interface Type -002 LD -001 SB -000 FD 8859000K911 - XXX Panel Mount - 2 Hole Male Passivated Steel Please contact the factory for mounting instructions. 19 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMPM Connectors Panel Mounts - Extended Teflon & Pin Dash Number Interface Type -006 LD -005 SB -004 FD 8859000K051 - XXX Panel Mount - 4 Hole Male Passivated Steel Dash Number Interface Type -005 LD -004 SB -003 FD 8859000K911 - XXX Panel Mount - 2 Hole Male Passivated Steel Please contact the factory for mounting instructions. 20 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMP Connectors Surface/Float Mount Female 8869000G001 - 001 Suface/Float Mount Female - Post Contact Engineered Solutions Today's market for low-profile board to board RF interconnects is demanding tighter spacing SMPM connector on the market today. Our unique design assists in reducing the overall package The design eliminates the need for a "Bullet" adapter between the two male SMPM connectors. The SMPM female has been incorporated into the PC Board mounted housing requiring only two connectors for the complete interconnect. Excellent electrical and mechanical performance is still maintained when maximum misalignment conditions occur. Both connectors have a fully captivated center contact eliminating the need for any secondary soldering operation of the contact. The female connector may be mated with any other SMPM male housing. If further reduction in board spacing is needed, designers can choose from a number of shroud and pin Simplification of the assembly and overall cost reduction makes the low profile surface mount SMPM female a simple solution. Typical Board Layout (Shown mated with Delta P/N 8868000G91P- 004) Please contact the factory for mounting instructions. 21 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMPM Connectors Surface Mount Males Dash Number Interface Type -007 LD -006 SB -005 FD Dash Number Interface Type -006 LD 8868000G001 - XXX Surface Mount Male, Post Contact -005 FD -004 SB Dash Number Interface Type -013 CM 8868000G91P - XXX Surface Mount Male, Post Contact -012 SB -011 FD -010 LD 8868000G91P - XXX Surface Mount Male, Right Angle Post Contact Please contact the factory for mounting instructions. 22 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMPM Connectors Female to Female Bullet Adapters Dash Number Interface Type -011 .236 -004 .315 -003 .290 -002 .265 -001 .210 8828000G001 - XXX Female to Female "Bullet" Adapters 8828000G001 - 014 Female to Female "Bullet" Adapters Low Profile Assembly Procedure "J" Trim Codes J/05 A B .062 .010 .187 .010 1. Trim cable to dimesions shown. Remove any burrs from outer and center conductor. 2. Insert cable into body, making sure center conductor is inserted in slot in contact. Solder cable jacket to body, keeping end of cable flush with step in body as shown. Solder center conductor to contact and press cap into body until fully seated. Proper assembly technique is important to the overall performance of the cable assemblies. Please contact Delta Electronics for addditional information. 23 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure "N" Trim Codes N/01 A B .062 .010 .187 .010 1. Trim cable to dimesions shown. Remove any burrs from outer and center conductor. 2. Solder contact to center conductor. Fixturing to maintain gap as shown. Remove any excess solder from outside contact. 3. Insert cable into body and solder cable jacket to body keeping end of cable flush with insulator as shown. Proper assembly technique is important to the overall performance of the cable assemblies. Please contact Delta Electronics for addditional information. 24 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure "P" Trim Codes P/01 A B .062 .010 .187 .010 1. Trim cable to dimesions shown. Remove any burrs from outer and center conductor. 2. Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator as shown. Proper assembly technique is important to the overall performance of the cable assemblies. Please contact Delta Electronics for addditional information. Index by Delta Part Number Delta P/N 81-10384-XX-AU 25 Page Delta P/N Page ......................... 8 8672094G001-XXX ......................... 6 8600000G003-XXX ......................... 7 8672111G001-XXX ......................... 6 8601094G001-000 ......................... 5 8676037G001-000 ......................... 5 8608037G001-000 ......................... 4 8676111G001-000 ......................... 5 8608038G001-000 ......................... 4 8800000G003-000 ......................... 16 8608094G001-000 ......................... 4 8808094G001-003 ......................... 15 8608111G001-001 ......................... 4 8808111G003-000 ......................... 15 8624000G918-XXX ......................... 8 8824000G918-002 ......................... 16 8624000K910-XXX ......................... 7 8824000G918-XXX ......................... 17 8628000G001-XXX ......................... 11 8824000K911-XXX ......................... 16 8628000G911-XXX ......................... 12 8828000G001-XXX ......................... 21 8659000K051-XXX ......................... 9 8859000K051-XXX ......................... 17,18 8659000K910-XXX ......................... 8 8859000K911-XXX ......................... 17,18 8659000K911-XXX ......................... 9 8868000G001-XXX ......................... 20 8667000G91P-XXX ......................... 10 8868000G91P-XXX ......................... 20 8668000G001-XXX ......................... 10 8869000G001-001 ......................... 19 8668000G911-XXX ......................... 11 8876094G003-000 ......................... 15 8668000G91P-XXX ......................... 10 8876111G003-000 ......................... 15 8672037G001-XXX ......................... 6 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMPS Delta's New SMPS Welcome our new and smallest member of our SMPM family, the SMPS. SMPS Connectors DC-18 GHz (Economical Line) DC - 65 GHz (High Frequency Line). Delta's SMPS SMPS Connectors DC-18 GHz (Economical Line) DC - 65 GHz (High Frequency Line) Similar in functionality to the SMPM series, the SMPS series is 30% smaller than the SMPM series. While the SMPS construction allows for higher frequencies up to 65 GHz, Delta recognized applications where low interface board-board interconnects were in demand typically did not range above 18 GHz. For this reason Delta has developed 2 lines - The Economical Line (E-Line) and HF Line of SMPS. For higher frequency applications ranging above 40 GHz, tightly tolerance components and extreme handling and processing is required. The end result is a higher manufacturing cost. The SMPS series has a center to center mounting spacing of .078 of an inch and a minimum board to board spacing of .125" when utilizing its smallest bullet adapter (.098") and shrouds (.015 board to reference plane). Board mounts are supplied in numerous configurations - surface mount, thru mount and edge mount and bullets lengths range from .098 to .500" in length for the 26 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMPS SMPS Electrical Specifications: Nominal Impedance: 50 ohms Frequency Range: DC-65 GHz Typical VSWR: 1.20 Max thru 26.5 GHz ; 1.5 Max thru 65 GHz Insulation Resistance:3,500megohms DWV (@sea level): 250 Vrms RF Leakage: -80db to 3 GHz, -65db from 3 to 65 GHz Mechanical Specifications: Durability: 100 min (FD) ; 250 min (LD) ; 500 (SB & CM) Force to Engage: 4 lbs typ (FD) ; 2 lbs typ (SB & CM) Force to Disengage: 6.0 lbs typ (FD) ; 3 lbs typ (SB & CM) Contact Retention: 1.5 lbs min. Minimum Center Line to Center Line Spacing: .078" Radial Misalignment: +/- .010" Axial Misalignment: .010" Max Materials: Bodies/Shrouds: Beryllium Copper Per ASTM B196 and/or ASTM B197 or Stainless Steel type 303, Condition A Outer Contacts: Beryllium Copper Per ASTM B196 or ASTM B197 Center Contacts: Beryllium Copper Per ASTM B196 or ASTM B197 Insulators: PTFE Fluorocarbon per ASTM D1710 or Torlon per MIL-P-46179 27 Delta Electronics Mfg. Corp. deltarf.com Finishes: Bodies: Gold Plate per MIL-G-45204, over Nickel Plate per SAE AMS-QQ-N-290 or Passivated per AMS-QQ-P-35 Contacts: Gold Plate per MIL-G-45204, over Nickel Plate per SAE AMS-QQ-N-290 Environmental Specifications: Temperature Range: -65 C to +165 C Shock: Meets MIL-STD-202 Method 213, Condition I Vibration: Meets MIL-STD-202 Method 204, Condition D Altitude: Meets MIL-STD-202, Method 105 Condition C Thermal Shock: Meets MIL-STD-202, Method 107 Condition B _________________________________________ *These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors are available upon request. 978-927-1060 sales@deltarf.com Delta Electronics Mfg. Corp. www.deltarf.com 978-927-1060 sales@deltarf.com PO Box 53 416 Cabot St. Beverly, MA 01915