SPECIFICATION * Supplier : Samsung electro-mechanics * Samsung P/N : CL10A106MO8NQNC * Product : Multi-layer Ceramic Capacitor * Descriptiont : CAP, 10uF, 16V, 20, X5R, 0603 A. Samsung Part Number CL Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness 10 A 106 M O 8 Samsung Multi-layer Ceramic Capacitor 0603 (inch code) L: 1.6 0.15 X5R 10 20 % 16 V 0.8 0.15 mm N Q mm Inner electrode Termination Plating Product Special Packaging N W: C 0.8 0.15 mm Ni Cu Sn 100% (Pb Free) 0603 Size dimension spec Reserved for future use Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Capacitance Tan (DF) Insulation Resistance Appearance Withstanding Voltage Temperature Characterisitcs Adhesive Strength of Termination Bending Strength Solderability Resistance to Soldering heat Performance Test condition Within specified tolerance 0.50.1Vrms 1k10% 0.100 max. 10,000Mohm or 100MohmxuF Rated Voltage 60~120 sec. Whichever Is Smaller No abnormal exterior appearance Microscope (x10) 250% of the rated voltage No dielectric breakdown or mechanical breakdown X5R (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. terminal electrode Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. More than 75% of terminal surface is 1) Sn63Pb37 solder to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Capacitance change : within 7.5% Solder pot : 2705, 101sec. Tan , IR : initial spec. Vibration Test Moisture Resistance High Temperature Resistance Temperature Cycling Performance Capacitance change : within 5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10Hz to 55Hz (return : 1min.) 2hours x 3 direction (x, y, z) Capacitance change : within 12.5% With rated voltage Tan : 0.125 max 402, 90~95%RH, 500+12/-0hrs IR : 12.5*uF or Over Capacitance change : within 12.5% With 100% of the rated voltage Tan : 0.125 max Max. operating temperature IR : 1000+48/-0hrs 25*uF or Over Capacitance change : within 7.5% 1 cycle condition Tan , IR : initial spec. Min. operating temperatur 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.