ES2A, ES2B, ES2C, ES2D
www.vishay.com Vishay General Semiconductor
Revision: 25-Feb-16 1Document Number: 88587
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Ultrafast Plastic Rectifier
FEATURES
• Glass passivated pellet chip junction
• Ideal for automated placement
• Ultrafast recovery times for high efficiency
• Low forward voltage, low power losses
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer, automotive, and telecommunication.
MECHANICAL DATA
Case: DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
PRIMARY CHARACTERISTICS
IF(AV) 2.0 A
VRRM 50 V, 100 V, 150 V, 200 V
IFSM 50 A
trr 20 ns
VF0.90 V
TJ max. 150 °C
Package DO-214AA (SMB)
Diode variations Single die
DO-214AA (SMB)
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL ES2A ES2B ES2C ES2D UNIT
Device marking code EA EB EC ED
Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V
Maximum RMS voltage VRMS 35 70 105 140 V
Maximum DC blocking voltage VDC 50 100 150 200 V
Maximum average forward rectified current at TL = 110 °C IF(AV) 2.0 A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load IFSM 50 A
Operating junction and storage temperature range TJ, TSTG -55 to +150 °C
ES2A, ES2B, ES2C, ES2D
www.vishay.com Vishay General Semiconductor
Revision: 25-Feb-16 2Document Number: 88587
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse test: 300 ms pulse width, 1 % duty cycle
Note
(1) Units mounted on PCB 5.0 mm x 5.0 mm (0.013 mm thick) land areas
Note
(1) AEC-Q101 qualified
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL ES2A ES2B ES2C ES2D UNIT
Maximum instantaneous forward voltage 2.0 A VF (1) 0.90 V
Maximum DC reverse current at rated
DC blocking voltage
TA = 25 °C IR
10 μA
TA = 100 °C 350
Max. reverse recovery time IF = 0.5 A, IR = 1.0 A,
lrr = 0.25 A trr 20 ns
Maximum reverse recovery time IF = 2.0 A, VR = 30 V,
dI/dt = 50 A/μs, Ir = 10 % IRM
TJ = 25 °C trr
30 ns
TJ = 100 °C 50
Maximum stored charge IF = 2.0 A, VR = 30 V,
dI/dt = 50 A/μs, Ir = 10 % IRM
TJ = 25 °C Qrr
10 nC
TJ = 100 °C 25
Typical junction capacitance 4.0 V, 1 MHz CJ18 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL ES2A ES2B ES2C ES2D UNIT
Typical thermal resistance RJA (1) 75 °C/W
RJL (1) 20
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
ES2D-E3/52T 0.096 52T 750 7" diameter plastic tape and reel
ES2D-E3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel
ES2DHE3/52T (1) 0.096 52T 750 7" diameter plastic tape and reel
ES2DHE3/5BT (1) 0.096 5BT 3200 13" diameter plastic tape and reel
ES2DHE3_A/H (1) 0.096 H 750 7" diameter plastic tape and reel
ES2DHE3_A/I (1) 0.096 I 3200 13" diameter plastic tape and reel
ES2A, ES2B, ES2C, ES2D
www.vishay.com Vishay General Semiconductor
Revision: 25-Feb-16 3Document Number: 88587
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 4 - Typical Reverse Leakage Characteristics
Fig. 5 - Typical Junction Capacitance
Fig. 6 - Transient Thermal Impedance
0
3.0
80 90 100 110 120 130 140 150
Average Forward Rectified Current (A)
Lead Temperature (°C)
2.0
1.0
Resistive or Inductive Load
P.C.B. Mounted on
0.2" x 0.2" (5.0 mm x 5.0 mm)
Copper Pad Areas
0
10
20
30
40
50
60
1 10010
Peak Forward Surge Current (A)
8.3 ms Single Half Sine-Wave
at TL = 110 °C
Number of Cycles at 60 Hz
T
J
= 150 °C
T
J
= 125 °C
T
J
= 100 °C
T
J
= 25 °C
0.2 0.4 0.6 0.81.0 1.2 1.4
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
100
10
1
0.1
0.01
1
10
100
1000
10 000
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 25 °C
Percent of Rated Peak Reverse Voltage (%)
0 20406080 100
0.1
Instantaneous Reverse Leakage
Current (µA)
Reverse Voltage (V)
Junction Capacitance (pF)
0.1 101 100
20
10
30
40
50
60
0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.1
1
10
100
0.001 0.1 10 1000
Transient Thermal Impedance (°C/W)
t - Pulse Duration (s)
Junction to Ambient
Mounted on 5.0 mm x 5.0 mm copper pad
ES2A, ES2B, ES2C, ES2D
www.vishay.com Vishay General Semiconductor
Revision: 25-Feb-16 4Document Number: 88587
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Cathode Band
DO-214AA (SMB)
0.086 (2.20)
0.077 (1.95)
0.155 (3.94)
0.130 (3.30)
0.180 (4.57)
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.008 (0.2)
0 (0)
0.220 (5.59)
0.205 (5.21)
0.060 (1.52)
0.030 (0.76)
0.096 (2.44)
0.084 (2.13)
Mounting Pad Layout
0.086 (2.18) MIN.
0.060 (1.52) MIN.
0.085 (2.159) MAX.
0.220 (5.59) REF.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 13-Jun-16 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
