NC Nylon Connectors DF13 Series (1.25mm Pitch) DF13 SERIES 1.25 mm Pitch Compact Crimp Connectors Low profile with package height Type System Height (h) 5.3mm SMT 5.8mm Straight DIP Right-angle Features 1. Compact Low profile with package height of 5.8 mm (SMT straight type). DIP straight type: 5.3 mm, DIP right-angle type: 3.6 mm. For details, see "APPLICATION" on page 52. DIP 3.6mm SMT Designed for automatic packaging Suction plane provided for suction type automatic packaging machine Straight type Suction plane 2. Multi-pin Double-row type available with up to 40 pins, 30% higher packaging density than single-row type. 3. Compatible with automatic packaging Vacuum-operated header allows automatic embossed packaging. See Fig. 1. Can be packed in magazines for delivery. 4. Enhanced functions packed into compact unit Box construction prevents prying-out, completely preventing misinsertion. In addition, the SMT-compatible headers are reinforced to prevent separation of the solder connection. See Fig. 1. Reinforcement Angle type Suction plane Application Notebook computers, portable information terminals, compact OA equipment, and various consumer equipment such as video movies. Fig. 1 44 NC Nylon Connectors DF13 Series (1.25mm Pitch) Product standard Rated current Rated voltage Rating Item 1A AC 150 V Operating temp. Operating humidity -35~85C(Note 1) 40~80% Storage temp. Storage humidity Standard 1. Insulation resistance -10~60C (Note 2) 40~70% (Note 2) Conditions 500 M or more Measured at 100 VDC 2. Withstand voltage No flashover or dielectric breakdown allowed AC500V 1 minute 3. Contact resistance 30 m or less Measured at 100 mA 4. Insertion and withdrawals force MIN 0.3 N(30gf), MAX 3 N(300gf) To be measured with a steel pin of M0.350.002mm 5. Vibration resistance No electrical discontinuity of 1 s or more allowed Frequency: 10 - 55 Hz, single-side amplitude: 0.75 mm, 3 directions for 2 hours 6. Moisture resistance Contact resistance: 30 m or less, insulation resistance: 500 M or more Temperature: 402C, humidity: 90 - 95%, allow 96 hours before measurement . 7.Temperature cycle Contact resistance: 30 m or less, insulation resistance: 500 M or more (-55C for 30 min. / 5 - 35C for 10 min. / 85C for 30 min. / 5 - 35C for 10 min.) 5 cycles 8. Insertion/extraction life Contact resistance: 30 m or less Solder-plated: 30 insertions/extractions Gold-plated 9. Solder heat resistance No melting of resin affecting the connector performance allowed Dip type Flow: 250C for 10 min. SMT type Reflow: At recommended temperature profile Manual soldering: solder temperature: 300C for 3 seconds Manual soldering: solder temperature: 300C for 3 seconds Note 1: Note 2: Note 3: : 50 insertions/extractions Includes temperature rise when power is on. "Storage" refers to a long period of storage without use of the product before being mounted on a board. The operating temperature and humidity ranges apply to the connectors mounted on a board when turned off, and connectors under temporary storage such as those being transported. The above standards are typical for the DF13 series. The formal standards are stated in the delivery specifications. Material Product Crimp socket Crimp socket terminal Pin header (Dip) Part Material Insulation Polyamide resin Terminal Phosphor bronze Insulation Polyamide resin Terminal Brass Insulation Polyamide resin Pin header Terminal Brass (SMTsingle-row) Fittings Phosphor bronze Insulation Polyamide resin Pin header Terminal Brass (SMTdouble-row) Fittings Phosphor bronze Note: Our tin plating is protected from whiskers. Processing Beige Solder-plated or Gold-plated Beige Solder-plated Beige Solder-plated or Gold-plated Solder-plated Beige Solder-plated or Gold-plated Solder-plated UL Rating UL94V-0 UL94V-0 UL94V-0 UL94V-0 Structure of the product number The product specifications can be determined from the product number. When ordering, select products using the product numbers listed in this catalog 46 to 52 pages. Connector DF13# - S - 1.25C Series Name : DF Series No. : 13 Shape symbol For V type only No. of contacts: Single row: : 2~12, 14, 15 Double-row: : 10, 20, 30, 40 Types of connectors Blank: With guide post S: Single-row socket A: Without guide post P: Single-row pin header B: With guide post,embossed type packing DS: Double-row socket C: Without guide post, embossed type DP: Double-row pin header packing Contact pitch: 1.25 mm Connection form/Type of termination C: Crimp case DSA: Straight DIP DS: Right-angle DIP V: Straight SMT H: Right-angle SMT Terminal DF13 - 2630SCFA Applicable wire size 2630 : AWG26~30 Type of form/Type of packaging SCF : Socket contact * reel Type of plating Blank: Tin-plated A: Gold-plated 45 NC Nylon Connectors DF13 Series (1.25mm Pitch) Single-row socket [Specification No.]: -**,(**) Blank : 100 pcs. per pack (40) : 500 pcs. per package (41) : 1000 pcs. per package Photo shows engaged pins Unit : mm HRS No. Product No. No. of contacts A B HRS No. Product No. 536-0001-4- DF13-2S-1.25C () 2 1.25 4.15 536-0008-3- DF13- 9S-1.25C () 9 10.00 12.90 536-0002-7- DF13-3S-1.25C () 3 2.50 5.40 536-0009-6- DF13-10S-1.25C () 10 11.25 14.15 536-0003-0- DF13-4S-1.25C () 4 3.75 6.65 536-0010-5- DF13-11S-1.25C () 11 12.50 15.40 536-0004-2- DF13-5S-1.25C () 5 5.00 7.90 536-0011-8- DF13-12S-1.25C () 12 13.75 16.65 536-0005-5- DF13-6S-1.25C () 6 6.25 9.15 536-0013-3- DF13-14S-1.25C () 14 16.25 19.15 536-0006-8- DF13-7S-1.25C () 7 7.50 10.40 536-0014-6- DF13-15S-1.25C () 15 17.50 20.40 536-0007-0- DF13-8S-1.25C () 8 8.75 11.65 No. of contacts A B Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets. Note 2: Models available in (40): 500 pieces per package and (41): 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples of order units, e.g., 500, 1000, 1500,-- . Double-row socket Photo shows engaged pins Unit : mm HRS No. Product No. No. of contacts A B 536-0550-2- DF13-10DS-1.25C () 10 10.40 5.00 536-0555-6- DF13-20DS-1.25C () 20 16.65 11.25 536-0560-6- DF13-30DS-1.25C () 30 22.90 17.50 536-0565-0- DF13-40DS-1.25C () 40 29.15 23.75 [Specification No.]: -**,(**) Blank : 100 pcs. per pack (40) : 500 pcs. per package (41) : 1000 pcs. per package Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets. Note 2: Models available in (40): 500 pieces per package and (41): 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples of order units, e.g., 500, 1000, 1500,-- . 46 NC Nylon Connectors DF13 Series (1.25mm Pitch) Single-row Straight Pin Header (DIP) [Specification No.]: -**,(**) Blank : Tin-plated Board through-hole diameter : o0.60.03 Unit : mm No. of HRS No. Product No. A B HRS No. Product No. contacts 536-0101-9- DF13-2P-1.25DSA () 2 1.25 4.15 536-0108-8- DF13- 9P-1.25DSA () 536-0102-1- DF13-3P-1.25DSA () 3 2.50 5.40 536-0109-0- DF13-10P-1.25DSA () 536-0103-4- DF13-4P-1.25DSA () 4 3.75 6.65 536-0110-0- DF13-11P-1.25DSA () 536-0104-7- DF13-5P-1.25DSA () 5 5.00 7.90 536-0111-2- DF13-12P-1.25DSA () 536-0105-0- DF13-6P-1.25DSA () 6 6.25 9.15 536-0113-8- DF13-14P-1.25DSA () 536-0106-2- DF13-7P-1.25DSA () 7 7.50 10.40 536-0114-0- DF13-15P-1.25DSA () 536-0107-5- DF13-8P-1.25DSA () 8 8.75 11.65 Note : Minimum order quantity of the models without a number specified is one pack containing 100 sockets. No. of contacts 9 10 11 12 14 15 A 10.00 11.25 12.50 13.75 16.25 17.50 B 12.90 14.15 15.40 16.65 19.15 20.40 Single-row Right-angle Pin Header (DIP) [Specification No.]: -**,(**) (20):Tin-plated, magazine packaging Magazine dimension Board through-hole diameter : o0.60.03 Unit : mm HRS No. Product No. No. of contacts A B No. of products in a magazine HRS No. Product No. 536-0151-7- DF13-2P-1.25DS () 2 1.25 4.15 115 536-0158-6- DF13- 9P-1.25DS () 536-0152-0- DF13-3P-1.25DS () 3 2.50 5.40 89 536-0159-9- DF13-10P-1.25DS () 536-0153-2- DF13-4P-1.25DS () 4 3.75 6.65 72 536-0160-8- DF13-11P-1.25DS () 536-0154-5- DF13-5P-1.25DS () 5 5.00 7.90 61 536-0161-0- DF13-12P-1.25DS () 536-0155-8- DF13-6P-1.25DS () 6 6.25 9.15 52 536-0163-6- DF13-14P-1.25DS () 536-0156-0- DF13-7P-1.25DS () 7 7.50 10.40 46 536-0164-9- DF13-15P-1.25DS () 536-0157-3- DF13-8P-1.25DS () 8 8.75 11.65 41 Note: Order magazine-packaged products in multiples of the amount contained in a magazine. No. of contacts 9 10 11 12 14 15 A B 10.00 12.90 11.25 14.15 12.50 15.40 13.75 16.65 16.25 19.15 17.50 20.40 No. of products in a magazine 37 34 31 29 25 23 47 NC Nylon Connectors DF13 Series (1.25mm Pitch) Single-row Straight Pin Header (SMT) [Specification No.]: -**,(**) (20) : Tin-plated, magazine packaging (50) : Gold-plated, magazine packaging Having a box type housing, the pin headers of this model have no embossed suction surface and are not available in the embossed packaging specification. Unit : mm HRS No. Product No. No. of contacts A B C D 536-0201-3- DF13- 2P-1.25V () 2 1.25 4.15 7.15 3.35 536-0202-6- DF13- 3P-1.25V () 3 2.50 5.40 8.40 4.60 536-0203-9- DF13- 4P-1.25V () 4 3.75 6.65 9.65 5.85 536-0204-1- DF13- 5P-1.25V () 5 5.00 7.90 10.90 7.10 536-0205-4- DF13- 6P-1.25V () 6 6.25 9.15 12.15 8.35 536-0206-7- DF13- 7P-1.25V () 7 7.50 10.40 13.40 9.60 536-0207-0- DF13- 8P-1.25V () 8 8.75 11.65 14.65 10.85 536-0208-2- DF13- 9P-1.25V () 9 10.00 12.90 15.90 12.10 536-0209-5- DF13-10P-1.25V () 10 11.25 14.15 17.15 13.35 536-0210-4- DF13-11P-1.25V () 11 12.50 15.40 18.40 14.60 536-0211-7- DF13-12P-1.25V () 12 13.75 16.65 19.65 15.85 536-0213-2- DF13-14P-1.25V () 14 16.25 19.15 22.15 18.35 536-0214-5- DF13-15P-1.25V () 15 17.50 20.40 23.40 19.60 Note: Order magazine-packaged products in multiples of the amount contained in a magazine. Recommended board pattern Note: When a part marked with 48 E F 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 1.95 3.20 4.45 5.70 6.95 8.20 9.45 10.70 11.95 13.20 14.45 16.95 18.20 No. of products in a magazine 67 57 49 44 39 36 33 30 28 26 24 21 20 Remarks Guide post: Provided Magazine dimensional drawing has a pattern and no resist on it, take care to prevent the connector terminal from contacting it. NC Nylon Connectors DF13 Series (1.25mm Pitch) Single-row Straight Header (SMT) Recommended board pattern (Three-wall type compatible with emboss suction) (No te 1 ) Note 1: The hole is not required for products without the guide. Note 2: When a part marked with has a pattern and no resist on it, take care to prevent the connector terminal from contacting it. [Specification No.]: -**,(**) (20) : Tin-plated, magazine packaging (21) : Tin-plated, embossed packaging (50) : Gold-plated, magazine packaging (51) : Gold-plated, embossed packaging The pin headers of this model are three-wall type and have an embossed suction surface, and are thus compatible with suction-operated automatic packaging. Unit : mm HRS No. Product No. No. of contacts A B C D E F G 536-0051-2- 536-0052-5- 536-0053-8- 536-0054-0- 536-0055-3- 536-0056-6- 536-0057-9- 536-0058-1- 536-0059-4- 536-0060-3- 536-0061-6- 536-0063-1- 536-0064-4- DF13B- 2P-1.25V () DF13B- 3P-1.25V () DF13B- 4P-1.25V () DF13B- 5P-1.25V () DF13B- 6P-1.25V () DF13B- 7P-1.25V () DF13B- 8P-1.25V () DF13B- 9P-1.25V () DF13B-10P-1.25V () DF13B-11P-1.25V () DF13B-12P-1.25V () DF13B-14P-1.25V () DF13B-15P-1.25V () 2 3 4 5 6 7 8 9 10 11 12 14 15 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 1.95 3.20 4.45 5.70 6.95 8.20 9.45 10.70 11.95 13.20 14.45 16.95 18.20 2.20 3.45 3.10 4.35 5.60 6.85 8.10 9.35 10.60 11.85 13.10 15.60 16.85 67 57 49 44 39 36 33 30 28 26 24 21 20 Emboss Width 16 16 24 24 24 24 24 24 24 32 32 32 44 1.95 3.20 4.45 5.70 6.95 8.20 9.45 10.70 11.95 13.20 14.45 16.95 18.20 2.20 3.45 3.10 4.35 5.60 6.85 8.10 9.35 10.60 11.85 13.10 15.60 16.85 67 57 49 44 39 36 33 30 28 26 24 21 20 16 16 24 24 24 24 24 24 24 32 32 32 44 536-0401-2- DF13C- 2P-1.25V () 2 1.25 4.15 7.15 . 5.65 536-0402-5- DF13C- 3P-1.25V () 3 2.50 5.40 8.40 . 6.90 536-0403-8- DF13C- 4P-1.25V () 4 3.75 6.65 9.65 . 8.15 536-0404-0- DF13C- 5P-1.25V () 5 5.00 7.90 10.90 . 9.40 536-0405-3- DF13C- 6P-1.25V () 6 6.25 9.15 12.15 . 10.65 536-0406-6- DF13C- 7P-1.25V () 7 7.50 10.40 13.40 . 11.90 536-0407-9- DF13C- 8P-1.25V () 8 8.75 11.65 14.65 . 13.15 536-0408-1- DF13C- 9P-1.25V () 9 10.00 12.90 15.90 . 14.40 536-0409-4- DF13C-10P-1.25V () 10 11.25 14.15 17.15 . 15.65 536-0410-3- DF13C-11P-1.25V () 11 12.50 15.40 18.40 . 16.90 536-0411-6- DF13C-12P-1.25V () 12 13.75 16.65 19.65 . 18.15 536-0413-1- DF13C-14P-1.25V () 14 16.25 19.15 22.15 . 20.65 536-0414-4- DF13C-15P-1.25V () 15 17.50 20.40 23.40 . 21.90 Note 1: Order magazine packaged products in multiples of the number in one magazine. Note 2: Order embossed packaged product in reels (1,000 pcs. per reel). No. of products in a magazine Remarks Guide post: Provided Guide post: Not Provided 49 NC Nylon Connectors DF13 Series (1.25mm Pitch) Single-row Right-angle Pin Header (SMT) Recommended board pattern (Four-wall type compatible with emboss suction) Magazine dimensional drawing [Specification No.]: -**,(**) (20) : Tin-plated,magazine packaging (21) : Tin-plated, embossed packaging (50) : Gold-plated, magazine packaging (51) : Gold-plated, embossed packaging Unit : mm HRS No. 536-0251-1- 536-0252-4- 536-0253-7- 536-0254-0- 536-0255-2- 536-0256-5- 536-0257-8- 536-0258-0- 536-0259-3- 536-0260-2- 536-0261-5- 536-0263-0- 536-0264-3- Product No. DF13 DF13 DF13 DF13 DF13 DF13 DF13 DF13 DF13 DF13 DF13 DF13 DF13 - 2P-1.25H () - 3P-1.25H () - 4P-1.25H () - 5P-1.25H () - 6P-1.25H () - 7P-1.25H () - 8P-1.25H () - 9P-1.25H () -10P-1.25H () -11P-1.25H () -12P-1.25H () -14P-1.25H () -15P-1.25H () No. of contacts A B C D E 2 3 4 5 6 7 8 9 10 11 12 14 15 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 536-0301-8- DF13A- 2P-1.25H () 2 1.25 4.15 7.15 . 5.65 536-0302-0- DF13A- 3P-1.25H () 3 2.50 5.40 8.40 . 6.90 536-0303-3- DF13A- 4P-1.25H () 4 3.75 6.65 9.65 . 8.15 536-0304-6- DF13A- 5P-1.25H () 5 5.00 7.90 10.90 . 9.40 536-0305-9- DF13A- 6P-1.25H () 6 6.25 9.15 12.15 . 10.65 536-0306-1- DF13A- 7P-1.25H () 7 7.50 10.40 13.40 . 11.90 536-0307-4- DF13A- 8P-1.25H () 8 8.75 11.65 14.65 . 13.15 536-0308-7- DF13A- 9P-1.25H () 9 10.00 12.90 15.90 . 14.40 536-0309-0- DF13A-10P-1.25H () 10 11.25 14.15 17.15 . 15.65 536-0310-9- DF13A-11P-1.25H () 11 12.50 15.40 18.40 . 16.90 536-0311-1- DF13A-12P-1.25H () 12 13.75 16.65 19.65 . 18.15 536-0313-7- DF13A-14P-1.25H () 14 16.25 19.15 22.15 . 20.65 536-0314-0- DF13A-15P-1.25H () 15 17.50 20.40 23.40 . 21.90 Note 1: Order magazine packaged products in multiples of the number in one magazine. Note 2: Order embossed packaged product in reels (1,000 pcs. per reel). 50 Emboss in a magazine Width 67 16 57 16 49 24 44 24 39 24 36 24 33 24 30 24 28 24 26 32 24 32 21 32 20 44 No. of products 67 57 49 44 39 36 33 30 28 26 24 21 20 16 16 24 24 24 24 24 24 24 32 32 32 44 Remarks Guide post: Provided Guide post: Not Provided NC Nylon Connectors DF13 Series (1.25mm Pitch) Double-row Right-angle Pin Header (SMT) (Four-wall type compatible with emboss suction) Recommended board pattern Magazine dimensional drawing Note 2: The hole is not required Note 1: When a part marked with for products without has a pattern and no resist on it, the guide. take care to prevent the connector terminal from contacting it. [Specification No.]: -**,(**) (20) : Tin-plated, magazine packaging (29) : Tin-plated, embossed packaging (50) : Gold-plated, magazine packaging (59) : Gold-plated, embossed packaging Unit : mm HRS No. Product No. No. of contacts A B C D Spec. Spec. Spec. Spec. No. of products Emboss (20) (29) (50) (59) in a magazine Width 536-0510-8- DF13 -10DP-1.25V () 10 12.10 5.00 8.70 7.50 K K K K 40 24 536-0515-1- DF13 -20DP-1.25V () 20 18.35 11.25 14.95 13.75 K K K K 26 32 536-0520-1- DF13 -30DP-1.25V () 30 24.60 17.50 21.20 20.00 . . K K 19 44 536-0525-5- DF13 -40DP-1.25V () 40 30.85 23.75 27.45 26.25 . . K K 15 44 536-0600-9- DF13A-10DP-1.25V () 10 12.10 5.00 8.70 . K K K K 40 24 536-0605-2- DF13A-20DP-1.25V () 20 18.35 11.25 14.95 . K K K K 26 32 536-0610-2- DF13A-30DP-1.25V () 30 24.60 17.50 21.20 . . . K K 19 44 536-0615-6- DF13A-40DP-1.25V () 40 30.85 23.75 27.45 . . . K K 15 44 Remarks Guide post: Provided Guide post: Not Provided Note 1: Order magazine packaged products in multiples of the number in one magazine. Note 2: Order embossed packaged product in reels (1,000 pcs. per reel). Note 3: Embossed tape packaged products will be provided with suction area. 51 NC Nylon Connectors DF13 Series (1.25mm Pitch) Crimp terminal HRS No. Product No. Type Quantity Processing 536-0300-5 DF13-2630SCF Reel terminal 10,000 units per reel Tin-plated 536-0298-5 DF13-2630SCFA Reel terminal 10,000 units per reel Gold-plated Applicable wire (Tin-plated annealed copper wire) Recommended wire UL1571 Conductor size (core construction) Coating diameter AWG26 (7 cores/0.16 mm) Strip length AWG28 (7 cores/0.127 mm) o0.65~o1.0mm 1.2~1.9mm AWG30 (7 cores/0.1 mm) Note: Contact our sales department for unspecified wires. Applicable crimping tool Type HRS No. Product No. Applicable contact Applicator 901-4531-9 AP105-DF13-2630S Press body 901-0005-4 CM-105 ........... Manual crimping tool 550-0256-1 DF13-TB2630HC DF13-2630SCF DF13-2630SCF/SCFA Extraction tool 550-0179-2 DF-C-PO (B) DF13-2630SCF Note 1: Any problem caused by using a tool not approved by HIROSE is out of warranty. Note 2: The manual crimping tool consecutively cuts carrier-fitted reel terminals. Application drawing SMT (single row) Right angle Straight 52 DIP (single row) SMT (double rows) SMT type right-angle model (double-row) is not available. NC Nylon Connectors DF13 Series (1.25mm Pitch) Embossed tape carrier dimensional drawing (complies with JIS-C-0806) DF13B-P-1.25V (Guide post: Provided) DF13C-P-1.25V (Guide post: Not Provided) DF13-P-1.25H (Guide post: Provided) DF13A-P-1.25H (Guide post: Not Provided) Unit : mm Product type Dimension No. of contact A B C D DF13B-P-1.25V 2, 3 16 ....... 7.5 16.4 DF13C-P-1.25V 4~10 24 ....... 11.5 24.4 DF13 -P-1.25H 11~14 32 28.4 14.2 32.4 DF13A-P-1.25H 15 44 40.4 20.2 44.4 Note: 13-pin models are not available in series. 53 NC Nylon Connectors DF13 Series (1.25mm Pitch) Notes on use 1. Recommended temperature profile (SMT) Note 1: Note 2: 2. Recommended soldering You can solder a product up to two times under the same conditions, provided that the product is allowed to cool back to room temperature before the second soldering. The above temperature refers to the board surface temperature of the connector lead. Soldering iron temperature: 29010C, soldering time: less than 3 seconds conditions (SMT) 3. Recommended screen thickness (SMT) 0.15mm~0.2mm 4. Warp in board (SMT) 0.03 mm or less at the center of the connector with the connector ends as the reference. 5. Recommended soldering Reflow conditions by automatic soldering machine: Soldering temperature: 250 5C, condition (DIP) for 3 seconds or less. Manual soldering conditions : Soldering iron temperature: 29010C, soldering time: 2 second or less. 6. Cleaning conditions See "GUIDE TO HIROSE NYLON CONNECTORS." 7. Connecting conditions See "GUIDE TO HIROSE NYLON CONNECTORS." Because the crimp terminals are very small, use utmost care when crimping them in accordance with the"Crimping conditions list" and "Crimping quality standards." 8. PRECAUTIONS When inserting or extracting the connectors, do not pry them forcibly, to prevent them from beging damaged. 54