45
DF13 Series (1.25mm Pitch)
NC Nylon Connectors
■Product standard
Rated current 1 A Operating temp. -35~85˚C(Note 1) Storage temp. -10~60˚C (Note 2)
Rating Rated voltage AC 150 V Operating humidity 40~80% Storage humidity 40~70% (Note 2)
Item
Standard Conditions
1. Insulation resistance 500 MΩor more Measured at 100 VDC
2. Withstand voltage No flashover or dielectric breakdown allowed AC500V 1 minute
3. Contact resistance 30 mΩor less Measured at 100 mA
4. Insertion and withdrawals force
MIN 0.3 N(30gf), MAX 3 N(300gf) To be measured with a steel pin of M0.35±0.002mm
5. Vibration resistance No electrical discontinuity of 1 µs or more allowed Frequency: 10 - 55 Hz, single-side amplitude: 0.75 mm, 3 directions for 2 hours
6. Moisture resistance Contact resistance: 30 mΩor less, insulation resistance: 500 MΩor more Temperature: 40±2°C, humidity: 90 - 95%, allow 96 hours before measurement .
7.Temperature cycle Contact resistance: 30 mΩor less, insulation resistance: 500 MΩor more (-55°C for 30 min. /5 - 35°C for 10 min. /85°C for 30 min. /5 - 35°C for 10 min.) 5 cycles
8. Insertion/extraction life Contact resistance: 30 mΩor less Solder-plated: 30 insertions/extractions Gold-plated
:
50 insertions/extractions
9. Solder heat resistance No melting of resin affecting the connector performance allowed Dip type Flow: 250°C for 10 min. Manual soldering: solder temperature:
300°C for 3 seconds
SMT type Reflow: At recommended Manual soldering: solder temperature:
temperature profile 300°C for 3 seconds
Product Part Material Processing UL Rating
Crimp socket Insulation Polyamide resin Beige UL94V-0
Crimp socket terminal Terminal Phosphor bronze Solder-plated or Gold-plated
Pin header Insulation Polyamide resin Beige UL94V-0
(Dip) Terminal Brass Solder-plated
Pin header Insulation Polyamide resin Beige UL94V-0
(SMTsingle-row) Terminal Brass Solder-plated or Gold-plated
Fittings Phosphor bronze Solder-plated
Pin header Insulation Polyamide resin Beige UL94V-0
(SMTdouble-row) Terminal Brass Solder-plated or Gold-plated
Fittings Phosphor bronze Solder-plated
Note 1: Includes temperature rise when power is on.
Note 2: "Storage" refers to a long period of storage without use of the product before being mounted on a board.
The operating temperature and humidity ranges apply to the connectors mounted on a board when turned off, and connectors under
temporary storage such as those being transported.
Note 3: The above standards are typical for the DF13 series. The formal standards are stated in the delivery specifications.
■Material
Note: Our tin plating is protected from whiskers.
■Structure of the product number
The product specifications can be determined from the product number.
When ordering, select products using the product numbers listed in this catalog 46 to 52 pages.
●Connector DF13#
-
✻S
-
1.25C
➃
No. of contacts: Single row: : 2~12, 14, 15
Double-row: : 10, 20, 30, 40
➄ Types of connectors
S: Single-row socket
P: Single-row pin header
DS: Double-row socket
DP: Double-row pin header
➅Contact pitch: 1.25 mm
➆ Connection form/Type of termination
C: Crimp case
DSA: Straight DIP
DS: Right-angle DIP
V: Straight SMT
H: Right-angle SMT
➀Series Name : DF
➁Series No. : 13
➂ Shape symbol
Blank: With guide post
A: Without guide post
For V type only
B: With guide post,embossed type packing
C: Without guide post, embossed type
packing
➀➁➂ ➃➄ ➅ ➆
●Terminal DF13
-
2630SCFA
➀➁➂
➂ Type of plating
Blank: Tin-plated
A: Gold-plated
➀ Applicable wire size
2630 : AWG26~30
➁ Type of form/Type of packaging
SCF : Socket contact •reel