MB Series Bridge Rectifiers
Surface Mount
Page <1> 29/09/11 V1.1
www.element14.com
www.farnell.com
www.newark.com
Features:
•Rating to 1,000 V PRV
•Ideal for printed circuit board
•Lead tin plated copper
Reverse Voltage - 50 to 1,000 Volts
Forward Current - 0.8 Ampere
Dimensions : Inches (Millimetres)
Mechanical Data
Polarity : Symbol moulded on body
Weight : 0.0044 oz, 0.125 g
Mounting position : Any
MB Series Bridge Rectifiers
Surface Mount
Page <2> 29/09/11 V1.1
www.element14.com
www.farnell.com
www.newark.com
Characteristics Symbol MB05S MB1S MB2S MB4S MB6S MB8S MB10S Unit
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1,000
VMaximum RMS Voltage VRMS 35 70 140 280 420 560 700
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1,000
Maximum Average Forward
Rectified Current (Note 1) at TA= 40°C I(AV) 0.8
A
Peak Forward Surge Current
8.3 ms Single Half Sine-wave IFSM 30
Peak Forward Voltage at 0.8 A dc VF1.1 V
Maximum DC Reverse Current at TJ = 25°C
at Rated DC Blocking Voltage at TJ= 125°C IR
5
500 µA
Typical Junction Capacitance Per Element (Note 2) CJ15 pF
Typical Thermal Resistance (Note 3) RθJC 75 °C/W
Operating Temperature Range TJ
-55 to +150 °C
Storage Temperature Range TSTG
Notes: 1. Mounted on P C board
2. Measured at 1 MHz and applied reverse voltage of 4 V dc
3. Thermal resistance junction to case
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified
Single phase, half wave, 60 Hz, resistive or inductive load
For capacitive load, derate current by 20%
Ambient Temperature, °C
Number of Cycles at 60 Hz
Forward Current Derating Curve Maximum Non-Repetitive Surge Current
Average Forward Current Amperes
Peak Forward Surge Current,
Amperes
MB Series Bridge Rectifiers
Surface Mount
Page <3> 29/09/11 V1.1
www.element14.com
www.farnell.com
www.newark.com
Typical Reverse Characteristics Typical Forward Characteristics
Instantaneous Forward Voltage, Volts
Percent of Rated Peak Reverse Voltage, (%)
Instantaneous Reverse Current, (µA)
Instantaneous Forward Current, (A)
Typical Junction Capacitance
Reverse Voltage, Volts
Capacitance (pF)
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.
