MILITARY DATA SHEET Original Creation Date: 06/28/95 Last Update Date: 12/10/96 Last Major Revision Date: 06/28/95 MNLM110-X REV 0BL VOLTAGE FOLLOWER Industry Part Number NS Part Numbers LM110 LM110H/883 LM110J-8/883 LM110J/883 Prime Die LM110 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLM110-X REV 0BL Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Rs = 3K Ohms, Vin = 0 SYMBOL Vio Iib PARAMETER CONDITIONS NOTES Input Offset Voltage Input Current Large Signal Gain Voltage MIN MAX UNIT SUBGROUPS 2 4 mV 1 2 6 mV 2, 3 Vcc = +18V 2 4 mV 1 Vcc = +18V 2 6 mV 2, 3 Vcc = +5V 2 4 mV 1 Vcc = +5V 2 6 mV 2, 3 Vin = +10V 2 3 nA 1 2 10 nA 2, 3 2 3 nA 1 2 10 nA 2, 3 Vcc = +18V, Vin = +10V 2 3 nA 1 Vcc = +18V, Vin = +10V 2 10 nA 2, 3 Vcc = +18V, Vin = -10V 2 3 nA 1 Vcc = +18V, Vin = -10V 2 10 nA 2, 3 Vcc = +5V, Vin = +2V 2 3 nA 1 Vcc = +5V, Vin = +2V 2 10 nA 2, 3 Vcc = +5V, Vin = -2V 2 3 nA 1 Vcc = +5V, Vin = -2V 2 10 nA 2, 3 V/V 1 V/V 2, 3 Vin = -10V Avs PINNAME Vout = +10V, Rl = 8K Ohms 2 Vout = +10V, Rl = 10K Ohms 2 0.999 0.999 PSRR Power Supply Rejection Ratio +18V > Vcc > +5V 2 70 db 1, 2, 3 +Vout Output Voltage Swing Rl = 10K Ohms, Vin = +15V 2 10 V 1, 2, 3 -Vout Output Voltage Swing Rl = 10K Ohms, Vin = -15V 2 -10 V 1, 2, 3 Icc Power Supply Current Vcc = +18V 2 5.5 mA 1 Vcc = +18V 2 4 mA 2 Vcc = +18V 2 7.5 mA 3 2.5 Ohm 1 Rout Output Resistance 1, 2 Rin Input Resistance 1, 2 2 10 GOhm 1 MILITARY DATA SHEET MNLM110-X REV 0BL Electrical Characteristics DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Rs = 3K Ohms, Vin = 0. "Delta not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." SYMBOL PARAMETER Vio Input Offset Voltage Iib Input Bias Current Note 1: Note 2: CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS 2 -1 1 mV 1 Vin = +10V 2 -1 1 nA 1 Vin = -10V 2 -1 1 nA 1 Parameter tested go-no-go only. FIELD APPLICATION NOTE: To prevent oscillation, a 10K Ohm resistor should be tied in series with the input. 3