Original Creation Date: 06/28/95
Last Update Date: 12/10/96
Last Major Revision Date: 06/28/95
MNLM110-X REV 0BL MILITARY DATA SHEET
VOLTAGE FOLLOWER
NS Part Numbers
LM110H/883
LM110J-8/883
LM110J/883
Industry Part Number
LM110
Prime Die
LM110
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MNLM110-X REV 0BL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +15V, Rs = 3K Ohms, Vin = 0
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vio Input Offset
Voltage 2 4 mV 1
2 6 mV 2, 3
Vcc = +18V 2 4 mV 1
Vcc = +18V 2 6 mV 2, 3
Vcc = +5V 2 4 mV 1
Vcc = +5V 2 6 mV 2, 3
Iib Input Current Vin = +10V 2 3 nA 1
2 10 nA 2, 3
Vin = -10V 2 3 nA 1
2 10 nA 2, 3
Vcc = +18V, Vin = +10V 2 3 nA 1
Vcc = +18V, Vin = +10V 2 10 nA 2, 3
Vcc = +18V, Vin = -10V 2 3 nA 1
Vcc = +18V, Vin = -10V 2 10 nA 2, 3
Vcc = +5V, Vin = +2V 2 3 nA 1
Vcc = +5V, Vin = +2V 2 10 nA 2, 3
Vcc = +5V, Vin = -2V 2 3 nA 1
Vcc = +5V, Vin = -2V 2 10 nA 2, 3
Avs Large Signal Gain
Voltage Vout = +10V, Rl = 8K Ohms 2 0.999 V/V 1
Vout = +10V, Rl = 10K Ohms 2 0.999 V/V 2, 3
PSRR Power Supply
Rejection Ratio +18V > Vcc > +5V 2 70 db 1, 2,
3
+Vout Output Voltage
Swing Rl = 10K Ohms, Vin = +15V 2 10 V 1, 2,
3
-Vout Output Voltage
Swing Rl = 10K Ohms, Vin = -15V 2 -10 V 1, 2,
3
Icc Power Supply
Current Vcc = +18V 2 5.5 mA 1
Vcc = +18V 2 4 mA 2
Vcc = +18V 2 7.5 mA 3
Rout Output Resistance 1, 2 2.5 Ohm 1
Rin Input Resistance 1, 2 10 GOhm 1
2
MNLM110-X REV 0BL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS: DRIFT VALUES
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +15V, Rs = 3K Ohms, Vin = 0. "Delta not required on B-Level product. Deltas required for S-Level
product ONLY as specified on Internal Processing Instructions (IPI)."
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vio Input Offset
Voltage 2 -1 1 mV 1
Iib Input Bias
Current Vin = +10V 2 -1 1 nA 1
Vin = -10V 2 -1 1 nA 1
Note 1: Parameter tested go-no-go only.
Note 2: FIELD APPLICATION NOTE: To prevent oscillation, a 10K Ohm resistor should be tied in
series with the input.
3
