Advance Technical Data HiPerFASTTM IGBT VCES IC25 VCE(sat) tfi typ IXGH 40N60B2 IXGT 40N60B2 Optimized for 10-25 KHz hard switching and up to 150 KHz resonant switching Symbol Test Conditions Maximum Ratings VCES TJ = 25C to 150C 600 V VCGR TJ = 25C to 150C; RGE = 1 M 600 V VGES Continuous 20 V VGEM Transient 30 V IC25 TC = 25C (limited by leads) 75 A IC110 TC = 110C 40 A ICM TC = 25C, 1 ms 200 A SSOA (RBSOA) PC VGE = 15 V, TVJ = 125C, RG = 10 Clamped inductive load @ 600 V TC = 25C ICM = 80 A 300 W -55 ... +150 C TJM 150 C Tstg -55 ... +150 C 300 C TJ Maximum lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Md Mounting torque (M3) Weight TO-247 AD TO-268 SMD TO-268 (IXGT) G E C (TAB) C G = Gate, E = Emitter, E C = Collector, TAB = Collector Features z z z z 6 4 C (TAB) TO-247 AD (IXGH) G 1.13/10 Nm/lb.in. = 600 V = 75 A < 1.7 V = 82 ns g g Medium frequency IGBT Square RBSOA High current handling capability MOS Gate turn-on - drive simplicity Applications z Symbol VGE(th) Test Conditions Characteristic Values (TJ = 25C, unless otherwise specified) min. typ. max. = 250 A, VCE = VGE IC ICES VCE = VCES VGE = 0 V IGES VCE = 0 V, VGE = 20 V VCE(sat) IC = 30 A, VGE = 15 V 3.0 TJ = 25C TJ = 150C TJ = 25C (c) 2003 IXYS All rights reserved 5.0 z z z z V z 50 1 A mA 100 nA 1.7 V PFC circuits Uninterruptible power supplies (UPS) Switched-mode and resonant-mode power supplies AC motor speed control DC servo and robot drives DC choppers DS99049A(11/03) http://store.iiic.cc/ IXGH 40N60B2 IXGT 40N60B2 Symbol gfs Test Conditions Characteristic Values (TJ = 25C, unless otherwise specified) min. typ. max. IC = 30 A; VCE = 10 V, Pulse test, t 300 s, duty cycle 2 % Cies Coes VCE = 25 V, VGE = 0 V, f = 1 MHz 20 36 S 2560 pF 180 pF 54 pF 100 nC 15 nC 36 nC 18 ns 20 ns P Cres Qg Qge IC = 30 A, VGE = 15 V, VCE = 300 V Qgc td(on) tri Inductive load, TJ = 25C td(off) IC = 30 A, VGE = 15 V VCE = 400 V, RG = 3.3 tfi 130 200 ns 82 150 ns Eoff 0.4 0.8 mJ td(on) 18 ns tri Eon td(off) tfi Inductive load, TJ = 125C IC = 30 A, VGE = 15 V VCE = 400 V, RG = 3.3 Eoff 20 ns 0.3 mJ 240 ns 150 ns 1.10 mJ RthJC RthCK TO-247 AD Outline e Dim. Millimeter Min. Max. A 4.7 5.3 2.2 2.54 A1 2.2 2.6 A2 b 1.0 1.4 b1 1.65 2.13 b2 2.87 3.12 C .4 .8 D 20.80 21.46 E 15.75 16.26 e 5.20 5.72 L 19.81 20.32 L1 4.50 P 3.55 3.65 Q 5.89 6.40 R 4.32 5.49 S 6.15 BSC Inches Min. Max. .185 .209 .087 .102 .059 .098 .040 .055 .065 .084 .113 .123 .016 .031 .819 .845 .610 .640 0.205 0.225 .780 .800 .177 .140 .144 0.232 0.252 .170 .216 242 BSC TO-268 Outline 0.42 K/W (TO-247) 0.25 K/W Min. Recommended Footprint (Dimensions in inches and mm) IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETs and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 6,306,728B1 6,259,123B1 6,306,728B1 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 6,404,065B1 6,162,665 6,534,343 http://store.iiic.cc/ IXGH 40N60B2 IXGT 40N60B2 Fig. 1. Output Characte ristics @ 25 Deg. C 60 9V VGE = 15V 13V 180 7V 30 20 9V 120 90 7V 60 10 30 5V 5V 0 0 0.5 1 1.5 2 2.5 0 3 1 2 Fig. 3. Output Characteristics @ 125 Deg. C 5 6 7 1.4 VGE = 15V 13V 11V 50 4 Fig. 4. De pende nce of V CE(sat) on Tem perature 9V V GE = 15V 1.3 V C E (sat)- Normalized 60 3 V C E - Volts V C E - Volts I C - Amperes 11V 150 40 I C - Amperes I C - Amperes 210 VGE = 15V 13V 11V 50 Fig. 2. Extended Output Characte ristics @ 25 de g. C 7V 40 30 20 10 5V 1.2 I C = 60A 1.1 1.0 0.9 I C = 30A 0.8 0.7 0 I C = 15A 0.6 0.5 1 1.5 2 2.5 3 -50 -25 V CE - Volts 0 25 50 75 100 125 150 TJ - Degrees Centigrade Fig. 5. Collector-to-Em itter Voltage vs. Gate-to-Em itter voltage Fig. 6. Input Adm ittance 4 180 TJ = 25C 3.5 150 VC E - Volts 2.5 I C - Amperes I C = 60A 30A 15A 3 2 1.5 120 90 60 TJ = 125C 25C -40C 30 1 0 5 6 7 8 9 10 11 12 13 14 15 16 17 V G E - Volts 3 4 5 6 7 V G E - Volts (c) 2003 IXYS All rights reserved http://store.iiic.cc/ 8 9 10 IXGH 40N60B2 IXGT 40N60B2 Fig. 8. Dependence of Turn-Off Energy on RG Fig. 7. Transconductance 60 3 40 2.4 E off - milliJoules g f s - Siemens 2.7 TJ = -40C 25C 125C 50 30 20 I C = 60A TJ = 125C VGE = 15V VCE = 400V 2.1 1.8 1.5 I C = 30A 1.2 0.9 10 0.3 0 0 30 60 90 120 150 3 180 6 12 15 18 21 24 R G - Ohms Fig. 9. Dependence of Turn-Off Energy on Ic Fig. 10. Dependence of Turn-Off Energy on Tem perature 27 30 2.7 R G = 3.3 VGE = 15V VCE = 400V 2.1 R G = 3.3 VGE = 15V VCE = 400V 2.4 2.1 E off - milliJoules 2.4 1.8 1.5 TJ = 125C 1.2 0.9 0.6 I C = 60A 1.8 1.5 1.2 I C = 30A 0.9 0.6 TJ = 25C 0.3 0.3 0 I C = 15A 0 15 20 25 30 35 40 45 50 55 60 25 35 I C - Amperes 45 55 65 75 85 95 Fig. 12. Dependence of Turn-Off Sw itching Tim e on Ic 300 600 td(off) tfi - - - - - - 500 TJ = 125C VGE = 15V VCE = 400V 450 400 350 300 I C = 15A 250 I C = 30A I C = 60A 200 td(off) tfi - - - - - - 275 Switching Time - nanosecond 550 105 115 125 TJ - Degrees Centigrade Fig. 11. Dependence of Turn-Off Sw itching Tim e on RG Switching Time - nanosecond 9 I C - Amperes 2.7 E off - MilliJoules I C = 15A 0.6 150 100 R G = 3.3 VGE = 15V VCE = 400V 250 225 200 TJ = 125C 175 150 125 TJ = 25C 100 75 3 6 9 12 15 18 21 24 27 30 15 R G - Ohms 20 25 30 35 40 45 50 55 60 I C - Amperes IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETs and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 6,306,728B1 6,259,123B1 6,306,728B1 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 6,404,065B1 6,162,665 6,534,343 http://store.iiic.cc/ IXGH 40N60B2 IXGT 40N60B2 Fig. 13. Dependence of Turn-Off Sw itching Tim e on Te m perature Fig. 14. Gate Charge 15 td(off) tfi - - - - - - 250 200 175 I C = 15A 150 I C = 30A 125 VCE = 300V I C = 30A I G = 10mA 12 R G = 3.3 VGE = 15V VCE = 400V 225 VG E - Volts Switching Time - nanosecond 275 I C = 60A 9 6 3 100 0 75 25 35 45 55 65 75 85 95 TJ - Degrees Centigrade 105 115 125 0 10 20 30 40 50 60 70 80 90 100 Q G - nanoCoulombs Fig. 15. Capacitance 10000 Capacitance - p F f = 1 MHz C ies 1000 C oes 100 C res 10 0 5 10 15 20 25 V C E - Volts 30 35 40 Fig. 16. Maxim um Trans ient Therm al Res istance 0.45 0.4 R (th) J C - (C/W) 0.35 0.3 0.25 0.2 0.15 0.1 0.05 1 10 Pulse Width - milliseconds (c) 2003 IXYS All rights reserved http://store.iiic.cc/ 100 1000